Related references
Note: Only part of the references are listed.Construction of effective symmetrical air-cooled system for battery thermal management
Kai Chen et al.
APPLIED THERMAL ENGINEERING (2020)
Liquid cooling with phase change materials for cylindrical Li-ion batteries: An experimental and numerical study
Jiahao Cao et al.
ENERGY (2020)
Development of thermal equivalent circuit model of heat pipe-based thermal management system for a battery module with cylindrical cells
Yunhua Gan et al.
APPLIED THERMAL ENGINEERING (2020)
Air and PCM cooling for battery thermal management considering battery cycle life
Fenfang Chen et al.
APPLIED THERMAL ENGINEERING (2020)
Numerical investigation on PCM encapsulation shape used in the passive-active battery thermal management
Mojtaba Safdari et al.
ENERGY (2020)
Delayed liquid cooling strategy with phase change material to achieve high temperature uniformity of Li-ion battery under high-rate discharge
Jiahao Cao et al.
JOURNAL OF POWER SOURCES (2020)
Numerical analysis of temperature uniformity of a liquid cooling battery module composed of heat-conducting blocks with gradient contact surface angles
Zhiguo Tang et al.
APPLIED THERMAL ENGINEERING (2020)
Thermal performance of direct two-phase refrigerant cooling for lithium-ion batteries in electric vehicles
Seong Ho Hong et al.
APPLIED THERMAL ENGINEERING (2020)
A new concept of thermal management system in Li-ion battery using air cooling and heat pipe for electric vehicles
Hamidreza Behi et al.
APPLIED THERMAL ENGINEERING (2020)
Thermal and hydraulic characteristics of microchannel heat sinks with cavities and fins based on field synergy and thermodynamic analysis
Yifan Li et al.
APPLIED THERMAL ENGINEERING (2020)
Thermal performance of cylindrical lithium-ion battery thermal management system integrated with mini-channel liquid cooling and air cooling
Wen Yang et al.
APPLIED THERMAL ENGINEERING (2020)
Thermal characteristics of power battery module with composite phase change material and external liquid cooling
Junwei Li et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)
Development of hybrid cooling method with PCM and Al2O3 nanofluid in aluminium minichannels using heat source model of Li-ion batteries
Masoud Mashayekhi et al.
APPLIED THERMAL ENGINEERING (2020)
A comprehensive review of future thermal management systems for battery-electrified vehicles
Joris Jaguemont et al.
JOURNAL OF ENERGY STORAGE (2020)
A critical review of battery thermal performance and liquid based battery thermal management
Weixiong Wu et al.
ENERGY CONVERSION AND MANAGEMENT (2019)
Lithium-ion battery thermal management using heat pipe and phase change material during discharge-charge cycle: A comprehensive numerical study
Z. Y. Jiang et al.
APPLIED ENERGY (2019)
Thermal performance investigation of an air-cooled lithium-ion battery pack considering the inconsistency of battery cells
Xiongbin Peng et al.
APPLIED THERMAL ENGINEERING (2019)
Design of the structure of battery pack in parallel air-cooled battery thermal management system for cooling efficiency improvement
Kai Chen et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)
Experimental study on the thermal management performance of air cooling for high energy density cylindrical lithium-ion batteries
Yuqian Fan et al.
APPLIED THERMAL ENGINEERING (2019)
Experimental investigation of thermal performance of large-sized battery module using hybrid PCM and bottom liquid cooling configuration
Hengyun Zhang et al.
APPLIED THERMAL ENGINEERING (2019)
Battery thermal management system employing phase change material with cell-to-cell air cooling
Ravindra D. Jilte et al.
APPLIED THERMAL ENGINEERING (2019)
Thermal-hydraulic performances and synergy effect between heat and flow distribution in a truncated doubled-layered heat sink with Y-shaped fractal network
Yunfei Yan et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)
Experimental study on transient thermal characteristics of stagger-arranged lithium-ion battery pack with air cooling strategy
Xiaoling Yu et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)
Three-dimensional thermal modeling of Li-ion battery cell and 50 V Li-ion battery pack cooled by mini-channel cold plate
Yubai Li et al.
APPLIED THERMAL ENGINEERING (2019)
Cooling efficiency improvement of air-cooled battery thermal management system through designing the flow pattern
Kai Chen et al.
ENERGY (2019)
The performance management of a Li-ion battery by using tree-like mini-channel heat sinks: Experimental and numerical optimization
Huan-ling Liu et al.
ENERGY (2019)
Thermal performance of a cylindrical battery module impregnated with PCM composite based on thermoelectric cooling
Le Jiang et al.
ENERGY (2019)
A compact and lightweight liquid-cooled thermal management solution for cylindrical lithium-ion power battery pack
Yongxin Lai et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)
A comparative study on battery thermal management using phase change material (PCM)
Ashima Verma et al.
THERMAL SCIENCE AND ENGINEERING PROGRESS (2019)
Investigation into the effectiveness of nanofluids on the mini-channel thermal management for high power lithium ion battery
Huaqiang Liu et al.
APPLIED THERMAL ENGINEERING (2018)
Optimization of thermal management system for Li-ion batteries using phase change material
Yantong Li et al.
APPLIED THERMAL ENGINEERING (2018)
Structure optimization of parallel air-cooled battery thermal management system with U-type flow for cooling efficiency improvement
Kai Chen et al.
ENERGY (2018)
Investigation on the thermal performance of a battery thermal management system using heat pipe under different ambient temperatures
Jialin Liang et al.
ENERGY CONVERSION AND MANAGEMENT (2018)
Turbulent flow of Al2O3-water nanofluid through plate-fin heat exchanger (PFHE) with offset-strip channels
Morteza Khoshvaght-Aliabadi et al.
THERMAL SCIENCE AND ENGINEERING PROGRESS (2018)
Experimental investigation of thermal and strain management for lithium-ion battery pack in heat pipe cooling
Liyuan Feng et al.
JOURNAL OF ENERGY STORAGE (2018)
Influence of the oblique fin arrangement on the fluid flow and thermal performance of liquid cold plate
Nur Irmawati Om et al.
CASE STUDIES IN THERMAL ENGINEERING (2018)
Emission, injection and combustion characteristics of biodiesel and oxygenated fuel blends in a common rail diesel engine
Ertan Alptekin
ENERGY (2017)
Enabling fast charging - Battery thermal considerations
Matthew Keyser et al.
JOURNAL OF POWER SOURCES (2017)
Performance enhancement of straight and wavy miniature heat sinks using pin-fin interruptions and nanofluids
M. Khoshvaght-Aliabadi et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2017)
Thermal management performances of PCM/water cooling-plate using for lithium-ion battery module based on non-uniform internal heat source
Fanfei Bai et al.
APPLIED THERMAL ENGINEERING (2017)
Thermal design and simulation of mini-channel cold plate for water cooled large sized prismatic lithium-ion battery
S. Panchal et al.
APPLIED THERMAL ENGINEERING (2017)
Experimental and parametric studies on a miniature heat sink with offset-strip pins and Al2O3/water nanofluids
M. Khoshvaght-Aliabadi et al.
APPLIED THERMAL ENGINEERING (2017)
Prevent thermal runaway of lithium-ion batteries with minichannel cooling
Jian Xu et al.
APPLIED THERMAL ENGINEERING (2017)
Experimental and numerical study on heat transfer, flow resistance, and compactness of alternating flattened tubes
Ahmad Reza Sajadi et al.
APPLIED THERMAL ENGINEERING (2016)
Comparison of different cooling methods for lithium ion battery cells
Dafen Chen et al.
APPLIED THERMAL ENGINEERING (2016)
Experimental study on cooling performance of sinusoidal-wavy minichannel heat sink
M. Khoshvaght-Aliabadi et al.
APPLIED THERMAL ENGINEERING (2016)
An experimental study of thermal management system using copper mesh-enhanced composite phase change materials for power battery pack
Weixiong Wu et al.
ENERGY (2016)
Water cooled corrugated minichannel heat sink for electronic devices: Effect of corrugation shape
Morteza Khoshvaght-Aliabadi et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2016)
Dynamic thermal characteristics of heat pipe via segmented thermal resistance model for electric vehicle battery cooling
Feifei Liu et al.
JOURNAL OF POWER SOURCES (2016)
A critical review of thermal management models and solutions of lithium-ion batteries for the development of pure electric vehicles
Qian Wang et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)
Experimental investigation on the feasibility of heat pipe cooling for HEV/EV lithium-ion battery
Thanh-Ha Tran et al.
APPLIED THERMAL ENGINEERING (2014)
Investigation on a hydrogel based passive thermal management system for lithium ion batteries
Sijie Zhang et al.
ENERGY (2014)
A novel design including cooling media for Lithium-ion batteries pack used in hybrid and electric vehicles
Hassan Fathabadi
JOURNAL OF POWER SOURCES (2014)
Graphene-enhanced hybrid phase change materials for thermal management of Li-ion batteries
Pradyumna Goli et al.
JOURNAL OF POWER SOURCES (2014)
Experimental investigation on thermal management of electric vehicle battery with heat pipe
Zhonghao Rao et al.
ENERGY CONVERSION AND MANAGEMENT (2013)
A simulation and experimental study of fluid flow and heat transfer on cylindrical oblique-finned heat sink
Yan Fan et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2013)
A design of air flow configuration for cooling lithium ion battery in hybrid electric vehicles
Heesung Park
JOURNAL OF POWER SOURCES (2013)
Thermal management of cylindrical batteries investigated using wind tunnel testing and computational fluid dynamics simulation
Xuesong Li et al.
JOURNAL OF POWER SOURCES (2013)
Experimental study of an air-cooled thermal management system for high capacity lithium-titanate batteries
Michael R. Giuliano et al.
JOURNAL OF POWER SOURCES (2012)
Reciprocating air flow for Li-ion battery thermal management to improve temperature uniformity
Rajib Mahamud et al.
JOURNAL OF POWER SOURCES (2011)
Design optimization of electric vehicle battery cooling plates for thermal performance
Anthony Jarrett et al.
JOURNAL OF POWER SOURCES (2011)
Fluid flow and heat transfer in wavy microchannels
Y. Sui et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2010)
Passive control of temperature excursion and uniformity in high-energy Li-ion battery packs at high current and ambient temperature
R. Kizilel et al.
JOURNAL OF POWER SOURCES (2008)
Performance evaluation of a wavy-fin heat sink for power electronics
Marco Lorenzini et al.
APPLIED THERMAL ENGINEERING (2007)
Field synergy principle for enhancing convective heat transfer-its extension and numerical verifications
WQ Tao et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2002)
Share Paper
