Journal
INTERNATIONAL JOURNAL OF GREENHOUSE GAS CONTROL
Volume 109, Issue -, Pages -Publisher
ELSEVIER SCI LTD
DOI: 10.1016/j.ijggc.2021.103392
Keywords
CO2 storage; CO2 EOR; CO2 mobilty control; CO2-foam vs. N-2-foam; Reservoir conditions
Categories
Funding
- Gassnova
- Aker Carbon Capture (CLIMIT demo) [618190]
- NORCE
- Wintershall Dea
Ask authors/readers for more resources
The high mobility of CO2 in porous media is a common issue in global subsurface CO2 projects, requiring improved mobility control techniques like foam for effective and sustainable solutions. Research demonstrates that modifying the foam system with nitrogen can significantly enhance CO2 mobility control under specific conditions.
The high mobility of CO2 in porous media is an issue in most subsurface CO2 projects worldwide, demonstrated by uncontrolled and rapid migration through the reservoir, early well breakthroughs and poor sweep efficiency. Improved mobility control of CO2 is needed to accelerate and improve the value-creation from subsurface CO2 projects, both in terms of energy produced and volumes of CO2 stored. Field-proven conformance and mobility control techniques, such as foam, provide a cost-effective and sustainable alternative to overcome geological and process constraints observed with CO2 flow in reservoirs. In this laboratory study, we have investigated CO2 mobility control by foam in sandstone core samples at typical North Sea reservoir conditions, 220 barg and 100 degrees C, respectively. Two important aspects related to any field application of foam have been evaluated and discussed: I) Can strong CO2-foams be generated at reservoir conditions using AOS surfactant? If not, II) can relatively simple modifications to the foam system be made to improve foam properties and CO2 mobility control? Our results show that only high-mobility CO2-foams with low degree of CO2 mobility reduction are obtained at 220 barg and 100 degrees C. An easy way to improve the foam properties at reservoir conditions is suggested by changing the gas-phase in foam to nitrogen (N-2). The N-2-foams display improved foam generation performance, larger mobility control in terms of mobility reduction factors (MRF) and ability to block subsequent CO2 injection. An alternative strategy for applying foam for CO2 conformance and mobility control in subsurface CO2 projects, which emerges from this study, is to initiate the foam treatment with nitrogen followed by subsequent CO2 injection to change the main direction of CO2 flow to enhance the displacement area or reduce uncontrolled CO2 production between the injecting and producing wells (as illustrated in the graphical abstract). The possible mechanisms explaining the observed differences in foam properties using CO2 versus N2(,) including implications that could be helpful for future studies and CO2 field applications are discussed further in more detail. The efficiency and limitations of miscible CO2 flooding to recover oil and simultaneously store CO2 after extensive water flooding are also demonstrated in this article, which are relevant to enhanced oil recovery (EOR) and subsequent CO2 storage applications, known as the Carbon Capture Utilization and Storage (CCUS).
Authors
I am an author on this paper
Click your name to claim this paper and add it to your profile.
Reviews
Recommended
No Data Available