4.2 Article

Convective heat transfer in magnetized flow of nanofluids between two rotating parallel disks

Related references

Note: Only part of the references are listed.
Article Physics, Multidisciplinary

Thermal conductivity variation and heat generation effects on magneto-hybrid nanofluid flow in a porous medium with slip condition

Mohamed R. Eid et al.

Summary: This article analyzes the flow and heat transfer resulting from an exponentially decreased sheet of hybrid nanoparticles, and investigates the effects of different variable parameters on velocity, temperature profiles, skin friction coefficient, and local Nusselt number.

WAVES IN RANDOM AND COMPLEX MEDIA (2022)

Article Thermodynamics

Carbon nanotubes (CNTs)-based flow between two spinning discs with porous medium, Cattaneo-Christov (non-Fourier) model and convective thermal condition

B. Kumar et al.

Summary: In this study, the behavior of fluid flow between rotating discs with multi-wall and single-wall carbon nanotubes-based fluid under various porous medium and convective thermal conditions was investigated. The tangential velocity of MWCNTs-based fluid was found to be higher than that of SWCNTs-based fluid when the porous permeability parameter was small; the effect of Reynolds number varied under different porous permeability conditions.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

Article Thermodynamics

Impact of MHD radiative flow of hybrid nanofluid over a rotating disk

Hassan Waqas et al.

Summary: This article examines the impacts of non-linear thermal radiations on nanoparticles in water-based hybrid nanofluid flowing over a rotating disk, specifically focusing on the types and applications of carbon nanotubes. The study also looks into the behavioral analysis of velocity components and heat transfer under different parameters, showing that factors such as magnetic parameter and temperature ratio can affect the velocity field and heat transfer.

CASE STUDIES IN THERMAL ENGINEERING (2021)

Article Engineering, Multidisciplinary

Impact of heated obstacle position on magneto-hybrid nanofluid flow in a lid-driven porous cavity with Cattaneo-Christov heat flux pattern

Shaik Jakeer et al.

Summary: This article focuses on the study of magneto Cu-Al2O3/water hybrid nanofluid flow in a non-Darcy porous square cavity, analyzing the influence of various dimensionless parameters on the flow. Results show that the rate of fluid flow and heat transfer in the direction of the moving heated obstacle play a crucial role in the process.

ALEXANDRIA ENGINEERING JOURNAL (2021)

Article Thermodynamics

On the existence and uniqueness of solution for squeezing nanofluid flow problem and Green-Picard's iteration

Mostafa Esmaeili et al.

Summary: This study aims to explore the idea of solving the problem of squeezing nanofluid flow between two parallel plates using a novel mathematical method. The accuracy of the method is examined by comparing the obtained results with existing numerical data, indicating excellent agreement between the two. Additionally, the effects of nanoparticle shape and volume fraction on the flow and heat transfer characteristics are addressed, with the highest and lowest Nusselt numbers belonging to platelets and spherical nanoparticles.

INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2021)

Article Multidisciplinary Sciences

Significance of nanoparticle's radius, heat flux due to concentration gradient, and mass flux due to temperature gradient: The case of Water conveying copper nanoparticles

Nehad Ali Shah et al.

Summary: This report explores the importance of increasing nanoparticle radius, energy flux due to concentration gradient, and mass flux due to temperature gradient in fluid dynamics under an inclined magnetic field. The dimensional governing equation was non-dimensionalized and parameterized using suitable similarity variables, and numerical solutions were obtained using shooting techniques and MATLAB in-built bvp4c package.

SCIENTIFIC REPORTS (2021)

Article Multidisciplinary Sciences

Impact of Cattaneo-Christov heat flux model on MHD hybrid nano-micropolar fluid flow and heat transfer with viscous and joule dissipation effects

Asifa Tassaddiq

Summary: Literature review indicates that hybrid nanofluids are more effective in heat transfer compared to conventional fluids. This study focuses on the impact of hybrid nanoparticles on thermal efficiency of nano-structured micropolar fluid, utilizing the Cattaneo-Christov heat flux model. The results show a decrease in macro-velocity field with micropolar factor and Hartmann number, and an increase in thermal conductivity with higher values of Hartmann number, micropolar parameter, Eckert number, and material parameter.

SCIENTIFIC REPORTS (2021)

Article Mathematics, Applied

Numerically simulated behavior of radiative Fe3O4 and multi-walled carbon nanotube hybrid nanoparticle flow in presence of Lorentz force

S. A. Shehzad et al.

Summary: The study investigates the behavior of natural convection of aqueous-based hybrid nanomaterial under the combined effect of Lorentz force and radiation. The magnetic force slows down the flow, and the fluid tends to attract the magnetic field source. Nu(ave) is directly correlated with the Rayleigh number and radiation, but indirectly dependent on the Hartmann number.

APPLIED MATHEMATICS AND MECHANICS-ENGLISH EDITION (2021)

Article Thermodynamics

Numerical simulation of magnetohydrodynamics nanofluid flow in a semi-porous channel with a new approach in the least square method

Uddhaba Biswal et al.

Summary: This study investigates the flow of a fluid with added nanoparticles in a semi-permeable channel under a transverse magnetic effect, utilizing Maxwell-Garnett and Brinkman models. An efficient weighted residual method is proposed for solving coupled differential equations, and residual errors are analyzed for efficiency evaluation. It is found that residual error is almost zero in 6th term approximation under specific parameter values, and validation with previous works confirms the effectiveness of the proposed scheme.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

Article Physics, Multidisciplinary

Double stratified analysis for bioconvection radiative flow of Sisko nanofluid with generalized heat/mass fluxes

Fahad S. Al-Mubaddel et al.

Summary: With the development of nano-technology and thermal engineering, researchers have shown great interest in nano-materials due to their multidisciplinary significances in various fields. Current research focuses on bioconvection flow of Sisko nanofluid, analyzing the effects of porous space, inertial forces, and other factors. The study aims to suggest a more effective non-Newtonian nanofluid model and numerical solutions have shown interesting trends in velocity, temperature, and concentration profiles.

PHYSICA SCRIPTA (2021)

Article Engineering, Multidisciplinary

Numerical analysis of higher order chemical reaction on electrically MHD nanofluid under influence of viscous dissipation

D. Gopal et al.

Summary: This paper examines the thermophysical properties of higher-order chemical processing and viscous dissipation of nanofluid on a continuously stretching porous sheet. The impact of electric and magnetic fields on nanofluid with viscous dissipation in the presence of higher-order chemical reactions is the focus, observing the effects on thermal conductivity and heat transfer. By solving nonlinear ordinary differential equations and exploring various parameters, the study provides insight into the behavior of electrically conducting nanofluid flow and the thickness of boundary layers in momentum and thermal regions.

ALEXANDRIA ENGINEERING JOURNAL (2021)

Article Computer Science, Interdisciplinary Applications

Investigation of nanoparticles Cu, Ag and Fe3O4 on thermophoresis and viscous dissipation of MHD nanofluid over a stretching sheet in a porous regime: A numerical modeling

Silpi Hazarika et al.

Summary: This article investigates the hydromagnetic flow of three different nanoparticles in a water based nanofluid, focusing on the effects of heat generation and Soret number. The study shows that increasing nanoparticle volume fraction decreases liquid velocity but has no impact on liquid temperature, and different nanoparticles exhibit varying performance in terms of velocity and temperature.

MATHEMATICS AND COMPUTERS IN SIMULATION (2021)

Article Thermodynamics

A convective flow of Williamson nanofluid through cone and wedge with non-isothermal and non-isosolutal conditions: A revised Buongiorno model

Abdullah Dawar et al.

Summary: This paper investigates the convective flow of Williamson nanofluid over two different geometries (i.e. cone and wedge) under variable non-isothermal and non-isosolutal conditions, considering Brownian and thermophoresis diffusions. The system of equations is solved using the homotopy analysis method (HAM), and the results are shown through convergence analysis and graphical visualization of flow distributions. Numerical values of interest are presented in tables, showing differences in velocity, thermal, and concentration distributions for different parameters and geometries.

CASE STUDIES IN THERMAL ENGINEERING (2021)

Article Chemistry, Physical

Bidirectional Williamson nanofluid flow towards stretchable surface with modified Darcy's law

M. Z. Kiyani et al.

Summary: This study discusses the bidirectional flows of Williamson nanomaterial in porous space, utilizing a nonlinear model and the optimal homotopy analysis method to compute the results. It is found that increasing the Williamson parameter and porosity parameter slows down bidirectional velocities, while temperature is related to thermophoresis parameter and heat sources. Skin friction coefficients and Nusselt number increase with porosity parameter and Prandtl number, while the Sherwood number decreases due to Brownian motion.

SURFACES AND INTERFACES (2021)

Article Engineering, Multidisciplinary

Thermally radioactive bioconvection flow of Carreau nanofluid with modified Cattaneo-Christov expressions and exponential space-based heat source

Umar Farooq et al.

Summary: The research explores a new approach for heat transfer and biomedicine/bioengineering using nanoparticles in base fluid. Numerical simulations were conducted to examine the heat/mass transportation of nanofluid and bioconvection characteristics under various thermal consequences. The study reveals the effects of different parameters on velocity, temperature distribution, concentration field, and microorganism profile in the nanofluid flow.

ALEXANDRIA ENGINEERING JOURNAL (2021)

Article Engineering, Multidisciplinary

Flow of hybrid nanofluid through Darcy-Forchheimer porous space with variable characteristics

Farwa Haider et al.

Summary: This study presents a numerical solution for Darcy-Forchheimer flow of hybrid nanofluid with consideration of velocity slip condition, nonlinear thermal radiation, and thermal stratification. Numerical results reveal the local heat transfer rate of Titanium dioxide nanofluid is higher compared to hybrid nanofluid, and thermal radiation parameter enhances the local Nusselt number.

ALEXANDRIA ENGINEERING JOURNAL (2021)

Article Thermodynamics

UNSTEADY HOMOGENEOUS-HETEROGENEOUS REACTIONS IN MHD NANOFLUID MIXED CONVECTION FLOW PAST A STAGNATION POINT OF AN IMPULSIVELY ROTATING SPHERE

Abd El Nasser Mahdy et al.

Summary: This study establishes a mathematical model to describe the chemical reactions of a sphere in a single-phase nanofluid, and solves the resulting mixed convection flow numerically, discussing the similarities and differences in the behavior of physical parameters through graphs.

THERMAL SCIENCE (2021)

Article Thermodynamics

Flow of nanoliquid past a vertical plate with novel quadratic thermal radiation and quadratic Boussinesq approxim3ation: Sensitivity analysis

B. Mahanthesh et al.

Summary: This study investigates the heat transport of a 36 nm Al2O3-H2O nanofluid over a vertical plate, considering quadratic thermal radiation and Boussinesq approximation. The modified Buongiorno model is used, and the nonlinear differential problem is solved numerically by the Finite Difference Method. Results show that quadratic thermal radiation improves the temperature profile, while the mechanisms of Brownian random motion and thermophoresis have a negative impact on the heat transfer rate.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

Article Physics, Multidisciplinary

MHD Casson nanofluid flow over nonlinearly heated porous medium in presence of extending surface effect with suction/injection

S. M. Abo-Dahab et al.

Summary: This study aims to elucidate the thermophysical aspects of viscoelastic fluid flow on a nonlinearized stretched surface. Various factors such as magnetic field, convective heating, suspended nanosized particles are considered, and the flow characteristics are revealed through graphical structures. Wall drag, thermal and mass fluxes are calculated and the credibility of the results is tested through comparison with previously published data.

INDIAN JOURNAL OF PHYSICS (2021)

Article Thermodynamics

GFEM analysis of MHD nanofluid flow toward a power-law stretching sheet in the presence of thermodiffusive effect along with regression investigation

Rangoli Goyal et al.

Summary: In this study, Galerkin finite-element simulation was used to analyze triple diffusive flow with magnetic field effect on a power law stretching sheet. The research found that the magnetic field has a positive impact on heat and mass transfer, which is significant for engineering applications and manufacturing companies.

HEAT TRANSFER (2021)

Article Materials Science, Multidisciplinary

Irreversibility analysis in squeezing nanofluid flow with thermal radiation

T. Hayat et al.

Summary: The study focuses on enhancing thermal conductivity through Magnetohydrodynamic (MHD) nanoliquid, examining heat transfer in a compressible flow past isometric surfaces. Convergent homotopic solutions for velocity, temperature, and concentration are developed using the homotopy analysis technique (HAM). Parameters such as entropy generation, Bejan number, skin friction, Nusselt number, and Sherwood number are analyzed in the presence of radiation and viscous dissipation.

MULTIDISCIPLINE MODELING IN MATERIALS AND STRUCTURES (2021)

Article Thermodynamics

Thermal analysis and thermo-hydraulic characteristics of zirconia-water nanofluid under a convective boiling regime

M. M. Sarafraz et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2020)

Article Physics, Multidisciplinary

Influence of Arrhenius activation energy in MHD flow of third grade nanofluid over a nonlinear stretching surface with convective heat and mass conditions

Tasawar Hayat et al.

PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS (2020)

Article Materials Science, Multidisciplinary

Flow and thermal analysis on Darcy-Forchheimer flow of copper-water nanofluid due to a rotating disk: A static and dynamic approach

M. K. Nayak et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

Article Engineering, Electrical & Electronic

Structure, DFT calculations and heat transfer enhancement in [ZnO/PG + H2O]©hybrid nanofluid flow as a potential solar cell coolant application in a double-tube

Ahmed F. Al-Hossainy et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2020)

Article Thermodynamics

Cattaneo-Christov double diffusions and entropy generation in MHD second grade nanofluid flow by a Riga wall

Tasawar Hayat et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2020)

Article Thermodynamics

Stagnation flow of hybrid nanoparticles with MHD and slip effects

Nadeem Abbas et al.

HEAT TRANSFER-ASIAN RESEARCH (2020)

Article Chemistry, Physical

Entropy optimized CNTs based Darcy-Forchheimer nanomaterial flow between two stretchable rotating disks

Sohail A. Khan et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

Article Thermodynamics

Hydrothermal analysis of MHD nanofluid (TiO2-GO) flow between two radiative stretchable rotating disks using AGM

M. R. Zangooee et al.

CASE STUDIES IN THERMAL ENGINEERING (2019)

Article Mechanics

Flow and heat simultaneously induced by two stretchable rotating disks

Mustafa Turkyilmazoglu

PHYSICS OF FLUIDS (2016)

Article Chemistry, Physical

Synthesis of Al2O3-Cu/water hybrid nanofluids using two step method and its thermo physical properties

S. Suresh et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2011)