Related references
Note: Only part of the references are listed.Employing hooking and effective sheet thickness to achieve optimum failure load in lap joints of friction stir welded AA5456 aluminum
Hamed Shirazi et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2020)
Dissimilar friction stir welding of AA2198 and AA7475: Effect of solution treatment and aging on the microstructure and mechanical strength
M. R. Jandaghi et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Modelling of friction stir welding and its influence on the structural behaviour of aluminium stiffened panels
R. M. F. Paulo et al.
THIN-WALLED STRUCTURES (2020)
Mode I Fracture Toughness Evaluation of Adhesively Bonded Joints via J-Integral and DIC
Michele Perrella et al.
MACROMOLECULAR SYMPOSIA (2020)
Comparison of the corrosion resistance of an Al-Cu alloy and an Al-Cu-Li alloy
Mariana X. Milagre et al.
CORROSION ENGINEERING SCIENCE AND TECHNOLOGY (2019)
Fabrication of third generation Al-Li alloy by friction stir welding: a review
Md Parwez Alam et al.
SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES (2019)
Conventional and cooling assisted friction stir welding of AA6061 and AZ31B alloys
Kush P. Mehta et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Dissimilar friction stir lap welding of AA 6082-Mg AZ31: Force analysis and microstructure evolution
Luca Boccarusso et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Monitoring of friction stir welding based on vision system coupled with Machine learning algorithm
S. Sudhagar et al.
MEASUREMENT (2019)
A review on sensor based monitoring and control of friction stir welding process and a roadmap to Industry 4.0
Debasish Mishra et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
State of the art about dissimilar metal friction stir welding
Aude Simar et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2017)
Refilling termination hole in AA 2198-T851 by refill friction stir spot welding
Martin Reimann et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Origin of unusual fracture in stirred zone for friction stir welded 2198-T8 Al-Li alloy joints
Y. Tao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Magnesium and Aluminium alloys dissimilar joining by Friction Stir Welding
V. Paradiso et al.
17TH INTERNATIONAL CONFERENCE ON SHEET METAL (SHEMET17) (2017)
Microstructural Aspects in FSW and TIG Welding of Cast ZE41A Magnesium Alloy
Pierpaolo Carlone et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2016)
Correlation of microstructure and mechanical properties in friction stir welded 2198-T8 Al-Li alloy
Chong Gao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Mechanical characterization by DOE analysis of AA6156-T4 friction stir welded joints in as-welded and post-weld aged condition
Antonello Astarita et al.
MATERIALS TESTING (2015)
A real-time quality monitoring framework for steel friction stir welding using computational intelligence
Ali Baraka et al.
JOURNAL OF MANUFACTURING PROCESSES (2015)
Friction stir lap joining of 2198 aluminum-lithium alloy with weaving and pulsing variants
B. T. Gibson et al.
JOURNAL OF MANUFACTURING PROCESSES (2015)
Aluminum Friction Stir Weldbonding
Daniel F. O. Braga et al.
ICSI 2015 THE 1ST INTERNATIONAL CONFERENCE ON STRUCTURAL INTEGRITY FUNCHAL (2015)
Experimental Study of the Forces Acting on the Tool in the Friction-Stir Welding of AA 2024 T3 Sheets
A. Astarita et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2014)
Ageing response of a Al-Cu-Li 2198 alloy
Sai-fei Zhang et al.
MATERIALS & DESIGN (2014)
Defect features and mechanical properties of friction stir lap welded dissimilar AA2024-AA7075 aluminum alloy sheets
Youbao Song et al.
MATERIALS & DESIGN (2014)
Effect of welding parameters on mechanical and fatigue properties of friction stir welded 2198 T8 aluminum-lithium alloy joints
Yu E. Ma et al.
ENGINEERING FRACTURE MECHANICS (2013)
Lap shear strength and fatigue behavior of friction stir spot welded dissimilar magnesium-to-aluminum joints with adhesive
S. H. Chowdhury et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Processing maps and microstructural evolution of isothermal compressed Al-Cu-Li alloy
Hao Yin et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Microstructure and Fatigue Properties of a Friction Stir Lap Welded Magnesium Alloy
B. S. Naik et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2013)
Stress corrosion cracking behaviour of conventional and innovative aluminium alloys for aeronautic applications
A. Astarita et al.
SURFACE AND INTERFACE ANALYSIS (2013)
On the critical technological issues of friction stir welding lap joints of dissimilar aluminum alloys
C. Velotti et al.
SURFACE AND INTERFACE ANALYSIS (2013)
Influence of Process Parameters on Microstructure and Mechanical Properties in AA2024-T3 Friction Stir Welding
Pierpaolo Carlone et al.
METALLOGRAPHY MICROSTRUCTURE AND ANALYSIS (2013)
A characterization for the dynamic recrystallization kinetics of as-extruded 7075 aluminum alloy based on true stress-strain curves
Guo-zheng Quan et al.
COMPUTATIONAL MATERIALS SCIENCE (2012)
On the Critical Technological Issues of Friction Stir Welding T-Joints of Dissimilar Aluminum Alloys
A. Astarita et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2012)
Microstructure and Mechanical Properties of Friction Stir Lap Welded Aluminum Alloy AA2014
S. Babu et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2012)
Creep properties and precipitate evolution in Al-Li alloys microalloyed with Sc and Yb
Matthew E. Krug et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Factors affecting the properties of Friction Stir Welds between aluminum and magnesium alloys
P. Venkateswaran et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Effect of tool rotational speed and probe length on lap joint quality of a friction stir welded magnesium alloy
X. Cao et al.
MATERIALS & DESIGN (2011)
Experimental investigation of the influence of the FSW plunge processing parameters on the maximum generated force and torque
Sandra Zimmer et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2010)
Process optimisation and mechanical properties of friction stir lap welds of 7075-T6 stringers on 2024-T3 skin
L. Dubourg et al.
MATERIALS & DESIGN (2010)
Hot workability characteristics of magnesium alloy AZ80-A study using processing map
H. T. Zhou et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Effect of anisotropy on fatigue properties of 2198 Al-Li plates joined by friction stir welding
P. Cavaliere et al.
ENGINEERING FAILURE ANALYSIS (2009)
2198 Al-Li plates joined by Friction Stir Welding: Mechanical and microstructural behavior
P. Cavaliere et al.
MATERIALS & DESIGN (2009)
Friction stir welding of lap joints: Influence of process parameters on the metallurgical and mechanical properties
G. Buffa et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Analysis and modelling of fatigue failure of friction stir welded aluminum alloy single-lap joints
D. Fersini et al.
ENGINEERING FRACTURE MECHANICS (2008)
Effect of welding parameters on mechanical and microstructural properties of AA6082 joints produced by friction stir welding
P. Cavaliere et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
Recrystallization in AISI 304 austenitic stainless steel during and after hot deformation
A. Dehghan-Manshadi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Friction stir welding and processing
RS Mishra et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2005)
Progress in structural materials for aerospace systems
JC Williams et al.
ACTA MATERIALIA (2003)
Dynamic recrystallization behavior of AISI 304 stainless steel
SI Kim et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2001)
Shear localization and recrystallization in dynamic deformation of 8090 Al-Li alloy
YB Xu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2001)