☆ 4.6 Article

A novel method for improving drilling performance of CFRP/Ti6AL4V stacked materials

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)

Related references

Note: Only part of the references are listed.

Article Engineering, Manufacturing

Understanding processing parameter effects for carbon fibre reinforced thermoplastic composites manufactured by laser-assisted automated fibre placement (AFP)

Jiping Chen et al.

Summary: This study investigated the effects of laser-assisted automated fibre placement (AFP) on the mechanical properties of carbon fibre (CF)/polyphenylene sulphide (PPS) composites, with results indicating that interlaminar void content plays a significant role in determining the mechanical properties of the composites.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)

Add to Collection

Article Chemistry, Physical

Between-the-Holes Cryogenic Cooling of the Tool in Hole-Making of Ti-6Al-4V and CFRP

Asif Iqbal et al.

Summary: A novel technique of cooling the twist drill during hole drilling of high-strength lightweight materials shows potential in reducing tool wear, thrust force, and specific energy consumption, as well as improving hole quality. Compared to conventional continuous cryogenic cooling and no-cooling methods, the between-the-holes cryogenic cooling approach presents promising results in drilling CFRP and titanium alloy.

MATERIALS (2021)

Add to Collection

Article Mechanics

Effect of cutting parameters on thrust force, torque, hole quality and dust generation during drilling of GLARE 2B laminates

Imed Boughdiri et al.

Summary: The study found that feed has a significant effect on thrust force and torque during drilling of GLARE (R) hybrid aerospace material, and the use of DLC-coated tools can reduce surface deviation. Lower spindle speed can reduce the number of harmful particles in the air during drilling.

COMPOSITE STRUCTURES (2021)

Add to Collection

Article Automation & Control Systems

Investigation of microstructure, mechanical and machinability properties of Mo-added steel produced by powder metallurgy method

Mehmet Akif Erden et al.

Summary: This study investigated the impact of molybdenum inclusion on the microstructure, mechanical properties, and machinability of steels manufactured using the powder metallurgy approach. The results indicated that steel with 3% Mo displayed the highest yield and tensile strength. Furthermore, an increase in Mo content led to higher yield and tensile strength and a decrease in strain, while coated cutting tools showed better machining output in terms of environmental impact.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)

Add to Collection

Article Automation & Control Systems

Tool wear and machinability investigations in dry turning of Cu/Mo-SiCp hybrid composites

Emine Sap et al.

Summary: The study investigated the effects of different machining parameters on Cu/Mo-SiCp composites during turning, finding that the particle additive ratio was the most important parameter affecting surface roughness, tool wear, and cutting temperature. It was also observed that chip types and wear types changed with increasing reinforcement rates.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)

Add to Collection

Article Automation & Control Systems

Machinability investigations on CFRP composites: a comparison between sustainable cooling conditions

Mohd Danish et al.

Summary: This study investigates the milling performance of CFRPs in different lubri-cooling mediums, including dry, minimal lubrication, liquid nitrogen, and carbon dioxide, establishing a relationship between machining parameters and cutting mechanisms using response surface methodology (RSM). The parametric optimization was conducted using NSGA-II and PSO, with the latter showing better performance in terms of convergence characteristics and computational time. The empirical cumulative distribution-based data analysis suggests that all responses are compatible with the normal distribution function, and the ANOVA models are found to be substantial at a 95% confidence level, with lubri-cooling medium being the most critical factor affecting response parameters.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Physical

Tool Wear and Surface Evaluation in Drilling Fly Ash Geopolymer Using HSS, HSS-Co, and HSS-TiN Cutting Tools

Mohd Fathullah Ghazali et al.

Summary: In geopolymer drilling, the spindle speed is directly proportional to tool wear and inversely proportional to surface roughness. HSS-Co is the most favorable tool for drilling, with only HSS-Co drilling 15 holes at 100rpm without exceeding the maximum tool wear. The findings can serve as a guide for manufacturers and researchers for further applications of geopolymer.

MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Parametric Optimization for Improving the Machining Process of Cu/Mo-SiCP Composites Produced by Powder Metallurgy

Emine Sap et al.

Summary: Composite materials, such as Cu/Mo-SiCP composite materials produced by powder metallurgy, exhibit excellent performance attributes. The reinforcement ratio was found to be the dominant factor influencing all response parameters. Different machining parameters also have an impact on surface roughness, flank wear, and cutting temperature.

MATERIALS (2021)

Add to Collection

Article Mechanics

CFRP drilling under throttle and evaporative cryogenic cooling and micro-lubrication

Asif Iqbal et al.

Summary: Based on experimental results, micro-lubrication outperformed dry drilling and cryogenic coolants in terms of process viability, while throttle cryogenic cooling yielded the best results in work quality measures. Pecking showed disappointing results in most measures, whereas high cutting speed had advantages in specific cutting energy and process cost.

COMPOSITE STRUCTURES (2021)

Add to Collection

Article Mechanics

Machining damage and surface integrity evaluation during milling of UD-CFRP laminates: vs.

Dhiraj Kumar et al.

COMPOSITE STRUCTURES (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Verification of Johnson-Cook parameters of ferritic stainless steel by drilling process: experimental and finite element simulations

Mehmet Erdi Korkmaz

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

Add to Collection

Article Engineering, Mechanical

Experimental investigation on novel drilling strategy of CFRP laminates using variable feed rate

Nafiz Yasar et al.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2019)

Add to Collection

Article Mechanics

Effect of cutter geometry on machining induced damage in orthogonal cutting of UD polymer composites: FE study

F. Cepero-Mejias et al.

COMPOSITE STRUCTURES (2019)

Add to Collection

Review Mechanics

Delamination formation, evaluation and suppression during drilling of composite laminates: A review

Daxi Geng et al.

COMPOSITE STRUCTURES (2019)

Add to Collection

Article Engineering, Mechanical

Thrust force modelling and surface roughness optimization in drilling of AA-7075: FEM and GRA

Nafiz Yasar

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2019)

Add to Collection

Article Engineering, Industrial

Effects of duplex jets high-pressure coolant on machining temperature and machinability of Ti-6Al-4V superalloy

Mozammel Mia et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Prediction of the Tensile Load of Drilled CFRP by Artificial Neural Network

Burak Yenigun et al.

APPLIED SCIENCES-BASEL (2018)

Add to Collection

Article Green & Sustainable Science & Technology

Tool life enhancement in dry diamond turning of titanium alloys using an eddy current damping and a magnetic field for sustainable manufacturing

W. S. Yip et al.

JOURNAL OF CLEANER PRODUCTION (2017)

Add to Collection

Article Engineering, Manufacturing

Interlaminar fracture properties of surface treated Ti-CFRP hybrid composites under long-term hygrothermal conditions

Bin Yu et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)

Add to Collection

Article Mechanics

Experimental and numerical analysis on drilling of carbon fibre reinforced plastic and aluminium stacks

R. Zitoune et al.

COMPOSITE STRUCTURES (2016)

Add to Collection

Article Mechanics

On the temperatures developed in CFRP drilling using uncoated WC-Co tools Part I: Workpiece constituents, cutting speed and heat dissipation

J. L. Merino-Perez et al.

COMPOSITE STRUCTURES (2015)

Add to Collection

Article Engineering, Manufacturing

CFRP drilling: Fundamental study of local feed force and consequences on hole exit damage.

Cedric Bonnet et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2015)

Add to Collection

Article Engineering, Industrial

Flow visualization and characterization for optimized MQL machining of composites

Y. Iskandar et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2014)

Add to Collection

Article Engineering, Manufacturing

Tool wear and hole quality when single-shot drilling of metallic-composite stacks with diamond-coated tools

Chun L. Kuo et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2014)

Add to Collection

Proceedings Paper Engineering, Industrial

Influence of lay-up configuration and feed rate on surface integrity when drilling carbon fibre reinforced plastic (CFRP) composites

M. J. Li et al.

2ND CIRP CONFERENCE ON SURFACE INTEGRITY (CSI) (2014)

Add to Collection

Proceedings Paper Engineering, Industrial

Tool wear analyses in low frequency vibration assisted drilling of CFRP/Ti6Al4V stack material

Oliver Pecat et al.

6TH CIRP INTERNATIONAL CONFERENCE ON HIGH PERFORMANCE CUTTING (HPC2014) (2014)

Add to Collection

Article Engineering, Manufacturing

Manufacturing distortions of a CFRP box-structure - A semi-numerical prediction approach

E. Kappel et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2013)

Add to Collection

Article Engineering, Manufacturing

COMPARATIVE STUDY OF TOOL LIFE AND HOLE QUALITY IN DRILLING OF CFRP/TITANIUM STACK USING COATED CARBIDE DRILL

Ozden Isbilir et al.

MACHINING SCIENCE AND TECHNOLOGY (2013)

Add to Collection

Article Engineering, Manufacturing

Tool wear of coated drills in drilling CFRP

Xin Wang et al.

JOURNAL OF MANUFACTURING PROCESSES (2013)

Add to Collection

Article Engineering, Industrial

Drilling thick fabric woven CFRP laminates with double point angle drills

Yigit Karpat et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2012)

Add to Collection

Proceedings Paper Engineering, Manufacturing

Effect of the coating system on the tool performance when turning heat treated AISI 4140

Jan C. Aurich et al.

FIFTH CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING 2012 (2012)

Add to Collection

Article Engineering, Manufacturing

Hole quality assessment following drilling of metallic-composite stacks

I. S. Shyha et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2011)

Add to Collection

Article Engineering, Mechanical

Tool wear in drilling of composite/titanium stacks using carbide and polycrystalline diamond tools

Kyung-Hee Park et al.

WEAR (2011)

Add to Collection

Review Computer Science, Artificial Intelligence

Optimization of cutting parameters on delamination based on Taguchi method during drilling of GFRP composite

E. Kilickap

EXPERT SYSTEMS WITH APPLICATIONS (2010)

Add to Collection

Article Materials Science, Coatings & Films

TiAlN/TiAlZrN multilayered hard coatings for enhanced performance of HSS drilling tools

V. Braic et al.

SURFACE & COATINGS TECHNOLOGY (2010)

Add to Collection

Article Engineering, Biomedical

The use of cutting temperature to evaluate the machinability of titanium alloys

Masafumi Kikuchi

ACTA BIOMATERIALIA (2009)

Add to Collection

Article Engineering, Industrial

Performance of coated- and uncoated-carbide tools when drilling titanium alloy - Ti-6A14V

S. Sharif et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)

Add to Collection

Article Engineering, Manufacturing

Investigation on tool life and surface integrity when drilling Ti-6Al-4V and Ti-5Al-4V-Mo/Fe

Erween Abd. Rahim et al.

JSME INTERNATIONAL JOURNAL SERIES C-MECHANICAL SYSTEMS MACHINE ELEMENTS AND MANUFACTURING (2006)

Add to Collection

Article Engineering, Industrial

Experimental study on the milling of a Ti Beta 21S

JH Xu et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2002)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Machining of aerospace titanium alloys

F Nabhani

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.