Related references
Note: Only part of the references are listed.Microstructure and mechanical properties of CoCrNi-Mo medium entropy alloys: Experiments and first-principle calculations
Ruobin Chang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)
Achieving ultrahigh strength in CoCrNi-based medium-entropy alloys with synergistic strengthening effect
Xingshuo Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
First-principles study of phase stability and temperature-dependent mechanical properties of (Cr, M)23C6 (M = Fe, Mo) phases
Xiaoguo Gong et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Interstitial doping enhances the strength-ductility synergy in a CoCrNi medium entropy alloy
Igor Moravcik et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Tailoring grain growth and solid solution strengthening of single-phase CrCoNi medium-entropy alloys by solute selection
G. W. Hu et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)
Enhanced strength and ductility of Al0.9CoCrNi2.1 eutectic high entropy alloy by thermomechanical processing
Xi Jin et al.
MATERIALIA (2020)
Precipitation-driven metastability engineering of carbon-doped CoCrFeNiMo medium-entropy alloys at cryogenic temperature
Hyeonseok Kwon et al.
SCRIPTA MATERIALIA (2020)
Columnar to equiaxed transition and grain refinement of cast CrCoNi medium-entropy alloy by microalloying with titanium and carbon
X. W. Liu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Grain growth kinetics in CoCrFeNi and CoCrFeMnNi high entropy alloys processed by spark plasma sintering
M. Vaidya et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Effects of carbon on the microstructures and mechanical properties of FeCoCrNiMn high entropy alloys
Lin Guo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Static recrystallization and grain growth behaviour of Al0.3CoCrFeNi high entropy alloy
Murugesan Annasamy et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Superior cryogenic tensile properties of ultrafine-grained CoCrNi medium-entropy alloy produced by high-pressure torsion and annealing
Praveen Sathiyamoorthi et al.
SCRIPTA MATERIALIA (2019)
Effects of tungsten additions on the microstructure and mechanical properties of CoCrNi medium entropy alloys
Ruobin Chang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
High-entropy alloys
Easo P. George et al.
NATURE REVIEWS MATERIALS (2019)
Carbide precipitation strengthening in fine-grained carbon-doped FeCoCrNiMn high entropy alloy
Jian Peng et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Synergistic effect by Al addition in improving mechanical performance of CoCrNi medium-entropy alloy
Donghee Lee et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Precipitate behavior in nitrogen-containing CoCrNi medium-entropy alloys
Dennis Edgard Jodi et al.
MATERIALS CHARACTERIZATION (2019)
Recrystallized microstructures and mechanical properties of a C-containing CoCrFeNiMn-type high-entropy alloy
M. V. Klimova et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Achieving high strength and high ductility in Al0.3CoCrNi medium-entropy alloy through multi-phase hierarchical microstructure
Praveen Sathiyamoorthi et al.
MATERIALIA (2019)
Boron doped ultrastrong and ductile high-entropy alloys
Jae Bok Seol et al.
ACTA MATERIALIA (2018)
Influence of deformation induced nanoscale twinning and FCC-HCP transformation on hardening and texture development in medium-entropy CrCoNi alloy
C. E. Slone et al.
ACTA MATERIALIA (2018)
Critical stress for twinning nucleation in CrCoNi-based medium and high entropy alloys
He Huang et al.
ACTA MATERIALIA (2018)
Microstructural evolution and mechanical performance of carbon-containing CoCrFeMnNi-C high entropy alloys
Jun Yeong Ko et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Preparation and properties of medium entropy CoCrNi/boride metal matrix composite
Igor Moravcik et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Effect of nitrogen on corrosion behaviour of a novel high nitrogen medium-entropy alloy CrCoNiN manufactured by pressurized metallurgy
Hao Feng et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2018)
Site preference of metallic elements in M23C6 carbide in a Ni-based single crystal superalloy
Sisi Xiang et al.
MATERIALS & DESIGN (2017)
Heterogeneous precipitation behavior and stacking-fault-mediated deformation in a CoCrNi-based medium-entropy alloy
Y. L. Zhao et al.
ACTA MATERIALIA (2017)
Reasons for the superior mechanical properties of medium-entropy CrCoNi compared to high-entropy CrMnFeCoNi
G. Laplanche et al.
ACTA MATERIALIA (2017)
The effect of carbon on the microstructures, mechanical properties, and deformation mechanisms of thermo-mechanically treated Fe40.4Ni11.3Mn34.8Al17.5Cr6 high entropy alloys
Zhangwei Wang et al.
ACTA MATERIALIA (2017)
Directly cast bulk eutectic and near-eutectic high entropy alloys with balanced strength and ductility in a wide temperature range
Yiping Lu et al.
ACTA MATERIALIA (2017)
Precipitation behavior and its effects on tensile properties of FeCoNiCr high-entropy alloys
J. Y. He et al.
INTERMETALLICS (2016)
Simultaneously increasing the strength and ductility of a refractory high-entropy alloy via grain refining
Chien-Chang Juan et al.
MATERIALS LETTERS (2016)
Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures
Bernd Gludovatz et al.
NATURE COMMUNICATIONS (2016)
Precipitation of M23C6 and its effect on tensile properties of 0.3C-20Cr-11Mn-1Mo-0.35N steel
Leigang Zheng et al.
MATERIALS & DESIGN (2015)
Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures
Z. Wu et al.
ACTA MATERIALIA (2014)
Microstructural evolution after thermomechanical processing in an equiatomic, single-phase CoCrFeMnNi high-entropy alloy with special focus on twin boundaries
F. Otto et al.
INTERMETALLICS (2014)
Recovery, recrystallization, grain growth and phase stability of a family of FCC-structured multi-component equiatomic solid solution alloys
Z. Wu et al.
INTERMETALLICS (2014)
Structural properties, phase stability and theoretical hardness of Cr23-xMxC6 (M = Mo, W; x=0-3)
Z. Q. Lv et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Microstructures and properties of high-entropy alloys
Yong Zhang et al.
PROGRESS IN MATERIALS SCIENCE (2014)
Grain growth and the Hall-Petch relationship in a high-entropy FeCrNiCoMn alloy
W. H. Liu et al.
SCRIPTA MATERIALIA (2013)
Particle effects on recrystallization in magnesium-manganese alloys: Particle pinning
J. D. Robson et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Formation of M23C6-type precipitates and chromium-depleted zones in austenite stainless steel
Kenji Kaneko et al.
SCRIPTA MATERIALIA (2011)
Alloying effects on the microstructure and phase stability of Fe-Cr-Mn steels
James C. Rawers
JOURNAL OF MATERIALS SCIENCE (2008)
Site preference and mechanical properties of Cr23-xTxC6 and Fe21T2C6 (T = Mo, W)
Jiaying Xie et al.
ACTA MATERIALIA (2006)
Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element
A Takeuchi et al.
MATERIALS TRANSACTIONS (2005)
Microstructural development in equiatomic multicomponent alloys
B Cantor et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Nanostructured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes
JW Yeh et al.
ADVANCED ENGINEERING MATERIALS (2004)
Mechanical properties of injection molded Fe-6 % Ni-0.4 % C steels with varying Mo contents of 0.5 to 2 %
M Matsuda et al.
METALS AND MATERIALS INTERNATIONAL (2003)
A model for the competition of precipitation and recrystallization in deformed austenite
HS Zurob et al.
ACTA MATERIALIA (2001)
The effects of tungsten addition on the microstructural stability of 9Cr-Mo Steels
SG Hong et al.
JOURNAL OF NUCLEAR MATERIALS (2001)