Related references
Note: Only part of the references are listed.3D Printed Foods: A Comprehensive Review on Technologies, Nutritional Value, Safety, Consumer Attitude, Regulatory Framework, and Economic and Sustainability Issues
Antonietta Baiano
FOOD REVIEWS INTERNATIONAL (2022)
Binder jet 3D printing?Process parameters, materials, properties, modeling, and challenges*
Amir Mostafaei et al.
PROGRESS IN MATERIALS SCIENCE (2021)
Additive manufacturing of steels: a review of achievements and challenges
Nima Haghdadi et al.
JOURNAL OF MATERIALS SCIENCE (2021)
Review on 3D printing: Fight against COVID-19
Bankole I. Oladapo et al.
MATERIALS CHEMISTRY AND PHYSICS (2021)
Regulatory developments and their impacts to the nano-industry: A case study for nano-additives in 3D printing
Alicia A. Taylor et al.
ECOTOXICOLOGY AND ENVIRONMENTAL SAFETY (2021)
Characterization of Ultrafine Particles and VOCs Emitted from a 3D Printer
Sarka Bernatikova et al.
INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH (2021)
Influence of Powder Type on Aerosol Emissions in Powder-Binder Jetting with Emphasis on Lunar Regolith for In Situ Space Applications
Austin C. Hayes et al.
ACS ES&T ENGINEERING (2021)
Review on particle emissions during fused deposition modeling of acrylonitrile butadiene styrene and polylactic acid polymers
Manoj Aluri et al.
MATERIALS TODAY-PROCEEDINGS (2021)
3D printer as a potential source of indoor air pollution
S. Wojtyla et al.
INTERNATIONAL JOURNAL OF ENVIRONMENTAL SCIENCE AND TECHNOLOGY (2020)
Post-Processing Effects on Surface Properties of Direct Metal Laser Sintered AlSi10Mg Parts
Binnur Sagbas
METALS AND MATERIALS INTERNATIONAL (2020)
3D printing of bio-based polycarbonate and its potential applications in ecofriendly indoor manufacturing
Seong Je Park et al.
ADDITIVE MANUFACTURING (2020)
Nanomaterial Patterning in 3D Printing
Brian Elder et al.
ADVANCED MATERIALS (2020)
Chemical and Physical Characterization of 3D Printer Aerosol Emissions with and without a Filter Attachment
Erin F. Katz et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2020)
Review of the characteristics and possible health effects of particles emitted from laser printing devices
Jianwei Gu et al.
INDOOR AIR (2020)
Effect of nozzle temperature on the emission rate of ultrafine particles during 3D printing
Haejoon Jeon et al.
INDOOR AIR (2020)
Energy efficiency optimization for ecological 3D printing based on adaptive multi-layer customization
Jinghua Xu et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Characterizing particle emissions from a direct energy deposition additive manufacturing process and associated occupational exposure to airborne particles
Sebastien Bau et al.
JOURNAL OF OCCUPATIONAL AND ENVIRONMENTAL HYGIENE (2020)
Selective laser sintering 3D printing - an overview of the technology and pharmaceutical applications
Naseem A. Charoo et al.
DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY (2020)
Exhaust emissions from diesel engines fueled by different blends with the addition of nanomodifiers and hydrotreated vegetable oil HVO
Elzbieta Dobrzynska et al.
ENVIRONMENTAL POLLUTION (2020)
Additive Manufacturing Technologies for Drug Delivery Applications
Abdullah Mohammed et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
Reducing ultrafine particulate emission from multiple 3D printers in an office environment using a prototype engineering control
Kevin L. Dunn et al.
JOURNAL OF NANOPARTICLE RESEARCH (2020)
Emissions and health risks from the use of 3D printers in an occupational setting
Felix L. Chan et al.
JOURNAL OF TOXICOLOGY AND ENVIRONMENTAL HEALTH-PART A-CURRENT ISSUES (2020)
A Review of the Selective Laser Melting Lattice Structures and Their Numerical Models
Zaki Alomar et al.
ADVANCED ENGINEERING MATERIALS (2020)
Systematic Literature Review: Integration of Additive Manufacturing and Industry 4.0
Mario Enrique Hernandez Korner et al.
METALS (2020)
Additive Manufacturing and Textiles-State-of-the-Art
Dereje Berihun Sitotaw et al.
APPLIED SCIENCES-BASEL (2020)
Recent developments in metal additive manufacturing
Amit Bandyopadhyay et al.
CURRENT OPINION IN CHEMICAL ENGINEERING (2020)
Recent developments of nanomaterial applications in additive manufacturing: a brief review
Navakanth Vijay Challagulla et al.
CURRENT OPINION IN CHEMICAL ENGINEERING (2020)
3D printing: Principles and pharmaceutical applications of selective laser sintering
Atheer Awad et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
Solid-State Metal Additive Manufacturing: A Review
Nihan Tuncer et al.
JOM (2020)
Plastic recycling in additive manufacturing: A systematic literature review and opportunities for the circular economy
Fabio A. Cruz Sanchez et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Energy efficient 3D printed buildings: Material and techniques selection worldwide study
Ammar Alkhalidi et al.
JOURNAL OF BUILDING ENGINEERING (2020)
Characterization of particle emission from thermoplastic additive manufacturing
S. Sittichompoo et al.
ATMOSPHERIC ENVIRONMENT (2020)
Recent developments in polymers/polymer nanocomposites for additive manufacturing
H. Wu et al.
PROGRESS IN MATERIALS SCIENCE (2020)
Jetting-based 3D printing of edible materials
Saumil Vadodaria et al.
FOOD HYDROCOLLOIDS (2020)
Self-assembled proteins for food applications: A review
Barbara Tomadoni et al.
TRENDS IN FOOD SCIENCE & TECHNOLOGY (2020)
3D Printing to Support the Shortage in Personal Protective Equipment Caused by COVID-19 Pandemic
Mostapha Tarfaoui et al.
MATERIALS (2020)
New development of powder metallurgy in automotive industry
Zhao-qiang Tan et al.
JOURNAL OF CENTRAL SOUTH UNIVERSITY (2020)
Emissions associated with operations of four different additive manufacturing or 3D printing technologies
Rachel E. Zisook et al.
JOURNAL OF OCCUPATIONAL AND ENVIRONMENTAL HYGIENE (2020)
A state-of-the-art review on particulate wood polymer composites: Processing, properties and applications
Mohammad Z. R. Khan et al.
POLYMER TESTING (2020)
Particle and volatile organic compound emissions from a 3D printer filament extruder
Peter Byrley et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2020)
Interfacial rheology for the assessment of potential health effects of inhaled carbon nanomaterials at variable breathing conditions
Dorota Kondej et al.
SCIENTIFIC REPORTS (2020)
Wear resistance of maraging steel developed by direct metal laser sintering
Gulam Mohammed Sayeed Ahmed et al.
MATERIALS EXPRESS (2020)
Additive manufacturing of metamaterials: A review
Meisam Askari et al.
ADDITIVE MANUFACTURING (2020)
A review of 3D printing techniques for environmental applications
Mallikarjuna N. Nadagouda et al.
CURRENT OPINION IN CHEMICAL ENGINEERING (2020)
Estimation of the deposition of ultrafine 3D printing particles in human tracheobronchial airways
Wei-Chung Su et al.
JOURNAL OF AEROSOL SCIENCE (2020)
Exposure, assessment and health hazards of particulate matter in metal additive manufacturing: A review
Rui Chen et al.
CHEMOSPHERE (2020)
Selective laser sintered bio-inspired silicon-wollastonite scaffolds for bone tissue engineering
Nikhil Kamboj et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)
Additive Manufacturing Technologies: An Overview about 3D Printing Methods and Future Prospects
Mariano Jimenez et al.
COMPLEXITY (2019)
Metal 3D printing in construction: A review of methods, research, applications, opportunities and challenges
C. Buchanan et al.
ENGINEERING STRUCTURES (2019)
Characterization of particulate and gaseous pollutants emitted during operation of a desktop 3D printer
Jianwei Gu et al.
ENVIRONMENT INTERNATIONAL (2019)
VOC Emissions and Formation Mechanisms from Carbon Nanotube Composites during 3D Printing
Phillip M. Potter et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2019)
A critical review of fused deposition modeling 3D printing technology in manufacturing polylactic acid parts
Zengguang Liu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Potential occupational hazards of additive manufacturing
Gary A. Roth et al.
JOURNAL OF OCCUPATIONAL AND ENVIRONMENTAL HYGIENE (2019)
Particle emissions from fused deposition modeling 3D printers: Evaluation and meta-analysis
Peter Byrley et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2019)
Particle and vapor emissions from vat polymerization desktop-scale 3-dimensional printers
A. B. Stefaniak et al.
JOURNAL OF OCCUPATIONAL AND ENVIRONMENTAL HYGIENE (2019)
Toward the design of functional foods and biobased products by 3D printing: A review
Stephane Portanguen et al.
TRENDS IN FOOD SCIENCE & TECHNOLOGY (2019)
Impact of macronutrients printability and 3D-printer parameters on 3D-food printing: A review
Bianca Perez et al.
FOOD CHEMISTRY (2019)
An approach for dental prosthesis design and manufacturing through rapid manufacturing technologies
Matheus Beltrame Canciglieri et al.
INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING (2019)
3D printing: a critical review of current development and future prospects
Md. Hazrat Ali et al.
RAPID PROTOTYPING JOURNAL (2019)
Direct metal fabrication in rapid prototyping: A review
Naveed Ahmed
JOURNAL OF MANUFACTURING PROCESSES (2019)
Insights Into Emissions and Exposures From Use of Industrial-Scale Additive Manufacturing Machines
A. B. Stefaniak et al.
SAFETY AND HEALTH AT WORK (2019)
Additives migrating from 3D-printed plastic induce developmental toxicity and neuro-behavioural alterations in early life zebrafish (Danio rerio)
Milanga Walpitagama et al.
AQUATIC TOXICOLOGY (2019)
Characterization of volatile organic compound emissions from consumer level material extrusion 3D printers
Aika Y. Davis et al.
BUILDING AND ENVIRONMENT (2019)
Chemical Composition and Toxicity of Particles Emitted from a Consumer-Level 3D Printer Using Various Materials
Qian Zhang et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2019)
Shaping the future: recent advances of 3D printing in drug delivery and healthcare
Sarah J. Trenfield et al.
EXPERT OPINION ON DRUG DELIVERY (2019)
3D printing of musculoskeletal tissues: impact on safety and health at work
Mauro Petretta et al.
JOURNAL OF TOXICOLOGY AND ENVIRONMENTAL HEALTH-PART A-CURRENT ISSUES (2019)
Biomonitoring of Metal Exposure During Additive Manufacturing (3D Printing)
Stefan A. Ljunggren et al.
SAFETY AND HEALTH AT WORK (2019)
A review of the current progress and application of 3D printed concrete
Jingchuan Zhang et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Nanocluster Aerosol Emissions of a 3D Printer
Mikko Poikkimaki et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2019)
The characteristics and formation mechanisms of emissions from thermal decomposition of 3D printer polymer filaments
Shirun Ding et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2019)
3D-Printed Lab-on-a-Chip Diagnostic Systems-Developing a Safe-by-Design Manufacturing Approach
Panagiotis Karayannis et al.
MICROMACHINES (2019)
Review: The Impact of Metal Additive Manufacturing on the Aerospace Industry
Shahir Mohd Yusuf et al.
METALS (2019)
A robust ink deposition system for binder jetting and material jetting
Xuechen Shen et al.
ADDITIVE MANUFACTURING (2019)
A Perspective on Polylactic Acid-Based Polymers Use for Nanoparticles Synthesis and Applications
Tommaso Casalini et al.
FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2019)
Occupational exposure to gaseous and particulate contaminants originating from additive manufacturing of liquid, powdered, and filament plastic materials and related post-processes
Antti J. K. Vaisanen et al.
JOURNAL OF OCCUPATIONAL AND ENVIRONMENTAL HYGIENE (2019)
Particle and organic vapor emissions from children's 3-D pen and 3-D printer toys
Jinghai Yi et al.
INHALATION TOXICOLOGY (2019)
On-site three-dimensional printer aerosol hazard assessment: Pilot study of a portable in vitro exposure cassette
Nastassja A. Lewinski et al.
PROCESS SAFETY PROGRESS (2019)
Acrylonitrile butadiene styrene (ABS) and polycarbonate (PC) filaments three-dimensional (3-D) printer emissions-induced cell toxicity
Mariana T. Farcas et al.
TOXICOLOGY LETTERS (2019)
State-of-the-Art and Future Challenges of UV Curable Polymer-Based Smart Materials for Printing Technologies
Cristian Mendes-Felipe et al.
ADVANCED MATERIALS TECHNOLOGIES (2019)
Characteristics of nanoparticle formation and hazardous air pollutants emitted by 3D printer operations: from emission to inhalation
Jong-Sang Youn et al.
RSC ADVANCES (2019)
Evaluation of emissions and exposures at workplaces using desktop 3-dimensional printers
A. B. Stefaniak et al.
JOURNAL OF CHEMICAL HEALTH & SAFETY (2019)
Additive manufacturing in the wood-furniture sector: Sustainability of the technology, benefits and limitations of adoption
Federica Murmura et al.
JOURNAL OF MANUFACTURING TECHNOLOGY MANAGEMENT (2018)
Investigating particle emissions and aerosol dynamics from a consumer fused deposition modeling 3D printer with a lognormal moment aerosol model
Qian Zhang et al.
AEROSOL SCIENCE AND TECHNOLOGY (2018)
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Tuan D. Ngo et al.
COMPOSITES PART B-ENGINEERING (2018)
Acute health effects of desktop 3D printing (fused deposition modeling) using acrylonitrile butadiene styrene and polylactic acid materials: An experimental exposure study in human volunteers
I. Guemperlein et al.
INDOOR AIR (2018)
Total volatile organic compound emission evaluation and control for stereolithography additive manufacturing process
Yiran Yang et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Health survey of employees regularly using 3D printers
F. L. Chan et al.
OCCUPATIONAL MEDICINE-OXFORD (2018)
Exposures during industrial 3-D printing and post-processing tasks
Sonette Du Preez et al.
RAPID PROTOTYPING JOURNAL (2018)
Review on nanoparticles and nanostructured materials: history, sources, toxicity and regulations
Jaison Jeevanandam et al.
BEILSTEIN JOURNAL OF NANOTECHNOLOGY (2018)
3D Printing: What Are the Hazards?
Susan A. Randolph
WORKPLACE HEALTH & SAFETY (2018)
Safety Standards Aim to Rein in 3-D Printer Emissions
Janet Pelley
ACS CENTRAL SCIENCE (2018)
Future of 3D printing: How 3D bioprinting technology can revolutionize healthcare?
Steven Morris
BIRTH DEFECTS RESEARCH (2018)
3D printable conductive materials for the fabrication of electrochemical sensors: A mini review
Hairul Hisham Hamzah et al.
ELECTROCHEMISTRY COMMUNICATIONS (2018)
Three-dimensional printing with nano-enabled filaments releases polymer particles containing carbon nanotubes into air
Aleksandr B. Stefaniak et al.
INDOOR AIR (2018)
Nanoparticles in Daily Life: Applications, Toxicity and Regulations
Ritu Gupta et al.
JOURNAL OF ENVIRONMENTAL PATHOLOGY TOXICOLOGY AND ONCOLOGY (2018)
3-D printer settings effects on the thermal conductivity of acrylonitrile butadiene styrene (ABS)
Tyler Sonsalla et al.
POLYMER TESTING (2018)
3D printing processes for photocurable polymeric materials: technologies, materials, and future trends
Gabriele Taormina et al.
JOURNAL OF APPLIED BIOMATERIALS & FUNCTIONAL MATERIALS (2018)
Research needs and recommendations on environmental implications of additive manufacturing
David Rejeski et al.
ADDITIVE MANUFACTURING (2018)
High-performance ceramic parts with complex shape prepared by selective laser sintering: a review
An-Nan Chen et al.
ADVANCES IN APPLIED CERAMICS (2018)
Laser Sintering Technology and Balling Phenomenon
Perihan Oyar
PHOTOMEDICINE AND LASER SURGERY (2018)
Airborne particle emission of a commercial 3D printer: the effect of filament material and printing temperature
L. Stabile et al.
INDOOR AIR (2017)
Evaluating Measuring Techniques for Occupational Exposure during Additive Manufacturing of Metals: A Pilot Study
Pal Graff et al.
JOURNAL OF INDUSTRIAL ECOLOGY (2017)
Exploiting scattering media for exploring 3D objects
Alok Kumar Singh et al.
LIGHT-SCIENCE & APPLICATIONS (2017)
Aerosol Emissions from Fuse-Deposition Modeling 3D Printers in a Chamber and in Real Indoor Environments
Marina E. Vance et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2017)
Characterization and Control of Nanoparticle Emission during 3D Printing
Ohhun Kwon et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2017)
Selective laser sintering (SLS) 3D printing of medicines
Fabrizio Fina et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)
Three-Dimensional (3D) Printers in Libraries: Perspective and Preliminary Safety Analysis
Neelam Bharti et al.
JOURNAL OF CHEMICAL EDUCATION (2017)
Addressing Hazardous Implications of Additive Manufacturing Complementing Life Cycle Assessment with a Framework for Evaluating Direct Human Health and Environmental Impacts
Justin Bours et al.
JOURNAL OF INDUSTRIAL ECOLOGY (2017)
Characterization of Emissions from a Desktop 3D Printer
Luis Mendes et al.
JOURNAL OF INDUSTRIAL ECOLOGY (2017)
Is. D printing safe? Analysis of the thermal treatment of thermoplastics: ABS, PLA, PET, and nylon
Szymon Wojtyla et al.
JOURNAL OF OCCUPATIONAL AND ENVIRONMENTAL HYGIENE (2017)
Characterization of chemical contaminants generated by a desktop fused deposition modeling 3-dimensional Printer
Aleksandr B. Stefaniak et al.
JOURNAL OF OCCUPATIONAL AND ENVIRONMENTAL HYGIENE (2017)
Fume emissions from a low-cost 3-D printer with various filaments
Evan L. Floyd et al.
JOURNAL OF OCCUPATIONAL AND ENVIRONMENTAL HYGIENE (2017)
Case report of asthma associated with 3D printing
R. House et al.
OCCUPATIONAL MEDICINE-OXFORD (2017)
Overview on Additive Manufacturing Technologies
Flaviana Calignano et al.
PROCEEDINGS OF THE IEEE (2017)
Toxicity assessment of nanoparticles in various systems and organs
Yuan Yang et al.
NANOTECHNOLOGY REVIEWS (2017)
Capturing PM2.5 Emissions from 3D Printing via Nanofiber-based Air Filter
Chengchen Rao et al.
SCIENTIFIC REPORTS (2017)
3D printing trends in building and construction industry: a review
Yi Wei Daniel Tay et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2017)
Characterization of particle emissions from consumer fused deposition modeling 3D printers
Qian Zhang et al.
AEROSOL SCIENCE AND TECHNOLOGY (2017)
A new chapter in pharmaceutical manufacturing: 3D-printed drug products
James Norman et al.
ADVANCED DRUG DELIVERY REVIEWS (2017)
An exposure assessment of desktop 3D printing
Tracy L. Zontek et al.
JOURNAL OF CHEMICAL HEALTH & SAFETY (2017)
3D printing of polymer matrix composites: A review and prospective
Xin Wang et al.
COMPOSITES PART B-ENGINEERING (2017)
Polylactides in additive biomanufacturing
Patrina S. P. Poh et al.
ADVANCED DRUG DELIVERY REVIEWS (2016)
3D-printing techniques in a medical setting: a systematic literature review
Philip Tack et al.
BIOMEDICAL ENGINEERING ONLINE (2016)
The impact of manufacturing parameters on submicron particle emissions from a desktop 3D printer in the perspective of emission reduction
Yelin Deng et al.
BUILDING AND ENVIRONMENT (2016)
A Review of 3D Printing Techniques and the Future in Biofabrication of Bioprinted Tissue
Satyajit Patra et al.
CELL BIOCHEMISTRY AND BIOPHYSICS (2016)
Emissions of Ultrafine Particles and Volatile Organic Compounds from Commercially Available Desktop Three-Dimensional Printers with Multiple Filaments
Parham Azimi et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2016)
Nano-sized by-products from metal 3D printing, composite manufacturing and fabric production
Pelle Mellin et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Characterization of emissions from a desktop 3D printer and indoor air measurements in office settings
Patrick Steinle
JOURNAL OF OCCUPATIONAL AND ENVIRONMENTAL HYGIENE (2016)
Emission of particulate matter from a desktop three-dimensional (3D) printer
Jinghai Yi et al.
JOURNAL OF TOXICOLOGY AND ENVIRONMENTAL HEALTH-PART A-CURRENT ISSUES (2016)
Bioink properties before, during and after 3D bioprinting
Katja Hoelzl et al.
BIOFABRICATION (2016)
Characterization of particulate matters and total VOC emissions from a binder jetting 3D printer
Nima Afshar-Mohajer et al.
BUILDING AND ENVIRONMENT (2015)
Emissions of Nanoparticles and Gaseous Material from 3D Printer Operation
Yuna Kim et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2015)
3D printing of smart materials: A review on recent progresses in 4D printing
Zhong Xun Khoo et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2015)
A Review on 3D Printing for Customized Food Fabrication
Jie Sun et al.
43RD NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE, NAMRC 43 (2015)
Mechanical properties of components fabricated with open-source 3-D printers under realistic environmental conditions
B. M. Tymrak et al.
MATERIALS & DESIGN (2014)
3D Printing: New Economic Paradigms and Strategic Shifts
Banning Garrett
GLOBAL POLICY (2014)
Ultrafine particle emissions from desktop 3D printers
Brent Stephens et al.
ATMOSPHERIC ENVIRONMENT (2013)
Additive manufacturing and its societal impact: a literature review
Samuel H. Huang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Additive manufacturing (AM) and nanotechnology: promises and challenges
Olga Ivanova et al.
RAPID PROTOTYPING JOURNAL (2013)
3D printing based on imaging data: review of medical applications
F. Rengier et al.
INTERNATIONAL JOURNAL OF COMPUTER ASSISTED RADIOLOGY AND SURGERY (2010)
Occupational dermatitis to epoxydic and phenolic resins
Christian Geraut et al.
EUROPEAN JOURNAL OF DERMATOLOGY (2009)
Air pollution, ultrafine and nanoparticle toxicology: Cellular and molecular interactions
Vicki Stone et al.
IEEE TRANSACTIONS ON NANOBIOSCIENCE (2007)
Fire retardant mechanism of aliphatic bromine compounds in polystyrene and polypropylene
J Kaspersma et al.
POLYMER DEGRADATION AND STABILITY (2002)
Stereolitography of ceramic suspensions
A Greco et al.
JOURNAL OF MATERIALS SCIENCE (2001)
Removal of Volatile Organic Compounds from polluted air
FI Khan et al.
JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2000)