Related references
Note: Only part of the references are listed.A joint moment projection method and maximum entropy approach for simulation of soot formation and oxidation in diesel engines
Shaohua Wu et al.
APPLIED ENERGY (2020)
Efficient simulation and auto-calibration of soot particle processes in Diesel engines
Shaohua Wu et al.
APPLIED ENERGY (2020)
Ignition delay time measurement and kinetic modeling of furan, and comparative studies of 2,3-dihydrofuran and tetrahydrofuran at low to intermediate temperatures by using a rapid compression machine
Yingtao Wu et al.
COMBUSTION AND FLAME (2020)
Development of a Highly Compact and Robust Chemical Reaction Mechanism for Unsaturated Furan Oxidation in Internal Combustion Engines via a Multiobjective Genetic Algorithm and Generalized Polynomial Chaos
Kun Lin Tay et al.
ENERGY & FUELS (2020)
An optimised chemical kinetic model for the combustion of fuel mixtures of syngas and natural gas
T. Methling et al.
FUEL (2020)
Predicting the soot emission tendency of real fuels - A relative assessment based on an empirical formula
Trupti Kathrotia et al.
FUEL (2020)
Investigation of soot aggregate formation and oxidation in compression ignition engines with a pseudo bi-variate soot model
Shaohua Wu et al.
APPLIED ENERGY (2019)
Implementation of an efficient method of moments for treatment of soot formation and oxidation processes in three-dimensional engine simulations
Shaohua Wu et al.
APPLIED ENERGY (2019)
2-methylfuran pyrolysis: Gas-phase modelling and soot formation
Katiuska Alexandrino et al.
COMBUSTION AND FLAME (2018)
Experimental and mechanistic investigation of benzene formation during atmospheric pressure flow reactor oxidation of n-hexane, n-nonane, and n-dodecane below 1200 K
Trupti Kathrotia et al.
COMBUSTION AND FLAME (2018)
Combined Effects of Soot Load and Catalyst Activity on the Regeneration Dynamics of Catalytic Diesel Particulate Filters
Valeria Di Sarli et al.
AICHE JOURNAL (2018)
A novel linear transformation model for the analysis and optimisation of chemical kinetics
Torsten Methling et al.
COMBUSTION THEORY AND MODELLING (2017)
Experimental and Kinetic Modeling Study of 2-Methylfuran Pyrolysis at Low and Atmospheric Pressures
Zhanjun Cheng et al.
ENERGY & FUELS (2017)
A Study on the Emissions of Alternative Aviation Fuels
Sebastian Riebl et al.
JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME (2017)
Ignition delay times of low alkylfurans at high pressures using a rapid compression machine
Nan Xu et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2017)
Ceria-Coated Diesel Particulate Filters for Continuous Regeneration
Valeria Di Sarli et al.
AICHE JOURNAL (2017)
Comparative experimental and modeling study of the low- to moderate-temperature oxidation chemistry of 2,5-dimethylfuran, 2-methylfuran, and furan
Luc-Sy Tran et al.
COMBUSTION AND FLAME (2017)
2-methylfuran Oxidation in the Absence and Presence of NO
Katiuska Alexandrino et al.
FLOW TURBULENCE AND COMBUSTION (2016)
Combustion performance and emissions of 2-methylfuran diesel blends in a diesel engine
Helin Xiao et al.
FUEL (2016)
Review on the production methods and fundamental combustion characteristics of furan derivatives
Nan Xu et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)
Development of a skeletal mechanism for diesel surrogate fuel by using a decoupling methodology
Yachao Chang et al.
COMBUSTION AND FLAME (2015)
Experimental and Kinetic Study on the Ignition Delay Times of 2,5-Dimethylfuran and the Comparison to 2-Methylfuran and Furan
Nan Xu et al.
ENERGY & FUELS (2015)
Effect of furans on particle formation in diffusion flames: An experimental and modeling study
Mariano Sirignano et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2015)
A Single Pulse Shock Tube Study on the Pyrolysis of 2,5-Dimethylfuran
Dominik F. Schuler et al.
ZEITSCHRIFT FUR PHYSIKALISCHE CHEMIE-INTERNATIONAL JOURNAL OF RESEARCH IN PHYSICAL CHEMISTRY & CHEMICAL PHYSICS (2015)
Combustion chemistry and flame structure of furan group biofuels using molecular-beam mass spectrometry and gas chromatography - Part II: 2-Methylfuran
Luc-Sy Tran et al.
COMBUSTION AND FLAME (2014)
Combustion chemistry and flame structure of furan group biofuels using molecular-beam mass spectrometry and gas chromatography - Part III: 2,5-Dimethylfuran
Casimir Togbe et al.
COMBUSTION AND FLAME (2014)
Combustion chemistry and flame structure of furan,group biofuels using molecular-beam mass spectrometry and gas chromatography - Part I: Furan
Dong Liu et al.
COMBUSTION AND FLAME (2014)
Mechanism reduction for multicomponent surrogates: A case study using toluene reference fuels
Kyle E. Niemeyer et al.
COMBUSTION AND FLAME (2014)
Reactivity Trends in Furan and Alkyl Furan Combustion
Mazen A. Eldeeb et al.
ENERGY & FUELS (2014)
Kinetic and Numerical Study on the Effects of Di-tert-butyl Peroxide Additive on the Reactivity of Methanol and Ethanol
Hu Wang et al.
ENERGY & FUELS (2014)
Effects of piston bowl geometry on combustion and emission characteristics of biodiesel fueled diesel engines
J. Li et al.
FUEL (2014)
The pyrolysis of 2-methylfuran: a quantum chemical, statistical rate theory and kinetic modelling study
Kieran P. Somers et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2014)
Development of an n-heptane-n-butanol-PAH mechanism and its application for combustion and soot prediction
Hu Wang et al.
COMBUSTION AND FLAME (2013)
A comprehensive experimental and detailed chemical kinetic modelling study of 2,5-dimethylfuran pyrolysis and oxidation
Kieran P. Somers et al.
COMBUSTION AND FLAME (2013)
Combustion and emissions of 2,5-dimethylfuran addition on a diesel engine with low temperature combustion
Quanchang Zhang et al.
FUEL (2013)
A numerical study on a hydrogen assisted diesel engine
H. An et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2013)
Shock Tube and Chemical Kinetic Modeling Study of the Oxidation of 2,5-Dimethylfuran
Baptiste Sirjean et al.
JOURNAL OF PHYSICAL CHEMISTRY A (2013)
Unimolecular decomposition of 2,5-dimethylfuran: a theoretical chemical kinetic study
Baptiste Sirjean et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2013)
A high temperature and atmospheric pressure experimental and detailed chemical kinetic modelling study of 2-methyl furan oxidation
K. P. Somers et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2013)
High-Temperature Ignition Delay Times and Kinetic Study of Furan
Liangjie Wei et al.
ENERGY & FUELS (2012)
Theoretical Study of the Thermal Decomposition of the 5-Methyl-2-furanylmethyl Radical
Baptiste Sirjean et al.
JOURNAL OF PHYSICAL CHEMISTRY A (2012)
On the importance of graph search algorithms for DRGEP-based mechanism reduction methods
Kyle E. Niemeyer et al.
COMBUSTION AND FLAME (2011)
An experimental and kinetic investigation of premixed furan/oxygen/argon flames
Zhenyu Tian et al.
COMBUSTION AND FLAME (2011)
Effect of spark timing and load on a DISI engine fuelled with 2,5-dimethylfuran
Ritchie Daniel et al.
FUEL (2011)
Formation of nascent soot and other condensed-phase materials in flames
Hai Wang
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2011)
Development of a Practical Soot Modeling Approach and Its Application to Low-Temperature Diesel Combustion
Gokul Vishwanathan et al.
COMBUSTION SCIENCE AND TECHNOLOGY (2010)
A soot formation embedded reduced reaction mechanism for diesel surrogate fuel
Wenmiao Chen et al.
FUEL (2009)
An improved soot formation model for 3D diesel engine simulations
Joan Boulanger et al.
JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME (2007)
A fully, integrated kinetic Monte Carlo/molecular dynamics approach for the simulation of soot precursor growth
A Violi et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2002)
Share Paper
