Related references
Note: Only part of the references are listed.Experimental and analytical validation of mode II fracture toughness tests for a type of double-lap joint
Sota Oshima et al.
COMPOSITE STRUCTURES (2020)
Mode I and II Interlaminar Fracture in Laminated Composites: A Size Effect Study
Marco Salviato et al.
JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME (2019)
In-situ observation of microscopic damage in adhesively bonded CFRP joints under mode I and mode II loading
Sota Oshima et al.
COMPOSITE STRUCTURES (2019)
Towards a consensus on mode II adhesive fracture testing: Experimental study
M. Perez-Galmes et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2018)
A new approach for evaluating crack growth resistance curve of mode II delamination by doubly end-notched tension tests
Shigeki Yashiro et al.
ADVANCED COMPOSITE MATERIALS (2018)
Mode II fracture toughness of CFRP as a function of temperature and strain rate
J. J. M. Machado et al.
COMPOSITES PART B-ENGINEERING (2017)
A data reduction method based on the J-integral to obtain the interlaminar fracture toughness in a mode II end-loaded split (ELS) test
M. Perez-Galmes et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Delamination growth behavior of a woven E-glass/bismaleimide composite in seawater environment
Yian Zhao et al.
COMPOSITES PART B-ENGINEERING (2016)
Energy dissipation during delamination in composite materials - An experimental assessment of the cohesive law and the stress-strain field ahead of a crack tip
Meisam Jalalvand et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2016)
On the validity of linear elastic fracture mechanics methods to measure the fracture toughness of adhesive joints
Carlos Sarrado et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2016)
Measurement of interlaminar fracture properties of composites using the J-integral method
Yian Zhao et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2016)
An experimental data reduction method for the Mixed Mode Bending test based on the J-integral approach
Carlos Sarrado et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2015)
Standardization of the End-Notched Flexure Test for Mode II Interlaminar Fracture Toughness Determination of Unidirectional Laminated Composites
Barry D. Davidson
JOURNAL OF TESTING AND EVALUATION (2015)
Characterization of high-velocity impact damage in CFRP laminates: Part II - prediction by smoothed particle hydrodynamics
Shigeki Yashiro et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)
Prediction of Tensile Strength of Unidirectional CFRP Composites
T. Okabe et al.
ADVANCED COMPOSITE MATERIALS (2010)
Experimental investigation on test methods for mode II interlaminar fracture testing of carbon fiber reinforced composites
Wen-Xue Wang et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)
A status report on delamination resistance testing of polymer-matrix composites
A. J. Brunner et al.
ENGINEERING FRACTURE MECHANICS (2008)
Influences of friction, geometric nonlinearities, and fixture compliance on experimentally observed toughnesses from three and four-point bend end-notched flexure tests
Barry D. Davidson et al.
JOURNAL OF COMPOSITE MATERIALS (2007)
Mode II fracture testing of composites: a new look at an old problem
B. R. K. Blackman et al.
ENGINEERING FRACTURE MECHANICS (2006)
Modeling inelastic matrix crack tip deformation in a double cantilever beam specimen
JR Gregory et al.
JOURNAL OF COMPOSITE MATERIALS (2006)
J-integral evaluation for cases involving non-proportional stressing
Y Lei
ENGINEERING FRACTURE MECHANICS (2005)
Effects of friction, geometry, and fixture compliance on the perceived toughness from three- and four-point bend end-notched flexure tests
BD Davidson et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2005)
Evaluation of the accuracy of the four-point bend end-notched flexure test for mode II delamination toughness determination
C Schuecker et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2000)
Share Paper
