4.7 Article

A comprehensive study on the influences of different types of nano-sized particles usage in diesel-bioethanol blends on combustion, performance, and environmental aspects

Related references

Note: Only part of the references are listed.
Article Thermodynamics

Effect of Sr@ZnO nanoparticles and Ricinus communis biodiesel-diesel fuel blends on modified CRDI diesel engine characteristics

Manzoore Elahi M. Soudagar et al.

Summary: The study evaluated the performance and emission characteristics of a modified CRDI diesel engine fueled by RCME20 biodiesel blended with Sr@ZnO nanoparticles. Results indicated that under certain conditions, the engine performance was enhanced and emissions were reduced compared to RCME20 fuel.

ENERGY (2021)

Article Thermodynamics

Experimental investigation and prediction of performance and emission responses of a CI engine fuelled with different metal-oxide based nanoparticles-diesel blends using different machine learning algorithms

Umit Agbulut et al.

Summary: The study demonstrates that the addition of nanoparticles in ICEs significantly reduces exhaust pollutants and improves engine performance. Machine learning algorithms, particularly deep learning, provide satisfactory results in predicting engine responses, with DL yielding the best results followed by ANN, SVM, and k-NN.

ENERGY (2021)

Article Thermodynamics

Wastes to energy: Improving the poor properties of waste tire pyrolysis oil with waste cooking oil methyl ester and waste fusel alcohol-A detailed assessment on the combustion, emission, and performance characteristics of a CI engine

Umit Agbulut et al.

Summary: This study shows that the addition of waste biodiesel and fusel oil can improve the performance characteristics of waste tire pyrolysis oil diesel fuel blends, including increasing brake thermal efficiency, reducing brake specific fuel consumption, and lowering carbon monoxide and nitrogen oxide emissions. Waste tire pyrolysis oil-diesel fuel blends can also be an effective tool for waste management and an alternative to fossil fuels.

ENERGY (2021)

Article Thermodynamics

Exergetic and exergoeconomic analyses of a CI engine fueled with diesel-biodiesel blends containing various metal-oxide nanoparticles

Mustafa Karagoz et al.

Summary: In this study, comprehensive exergetic and exergoeconomic analyses were conducted on a single-cylinder, four-stroke diesel engine. Different nanofuels were tested at varying engine loads, with D90B10Al(2)O(3) showing the highest exergy efficiency and sustainability index values. Al2O3-doped nanofuel emerged as the best test fuel in terms of exergy, exergoeconomics, and sustainability analyzes.

ENERGY (2021)

Article Thermodynamics

Impact of aluminium oxide nanoparticles as an additive in diesel-methanol blends on a modern DI diesel engine

Jiangjun Wei et al.

Summary: The study demonstrates that adding aluminum oxide (AL(2)O(3)) nanoparticles to diesel-methanol blends can significantly improve engine performance, including enhancing peak in-cylinder pressure and thermal efficiency, reducing ignition delay and combustion duration, as well as decreasing fuel consumption and energy consumption, and lowering CO, HC, and smoke emissions.

APPLIED THERMAL ENGINEERING (2021)

Article Thermodynamics

Analysis of thermal performance of an improved shell and helically coiled heat exchanger

Azim Dogus Tuncer et al.

Summary: A new modification involving the integration of a hollow tube for cold fluid inlet was proposed to enhance the performance of a shell and helically coiled heat exchanger. The modified heat exchanger design successfully regulated fluid flow, improving heat transfer efficiency. The experimental results showed an average difference of 8% between simulation and actual performance, with overall heat transfer coefficients ranging from 1600-3150 W/m(2)K for the shell side, and 5700-13,400 W/m(2)K for the coil side.

APPLIED THERMAL ENGINEERING (2021)

Article Energy & Fuels

Effect of CuO nanoparticles concentration on the performance and emission characteristics of the diesel engine running on jojoba (Simmondsia Chinensis) biodiesel

Pankaj Mohan Rastogi et al.

Summary: This study investigates the effects of CuO nanoparticles on the performance, emissions, and combustion characteristics of a diesel engine running on jojoba biodiesel blend (JB20). The results show that the addition of CuO nanoparticles to JB20 fuel can increase fuel thermal efficiency and reduce emissions.
Article Green & Sustainable Science & Technology

Electricity production based forecasting of greenhouse gas emissions in Turkey with deep learning, support vector machine and artificial neural network algorithms

Melahat Sevgul Bakay et al.

Summary: This paper aims to forecast GHG emissions from the electricity production sector in Turkey using DL, SVM, and ANN algorithms. The results show that all algorithms used in the study give satisfying results for the forecasting of GHG emissions in Turkey. The forecasting results indicate a high R-2 value for the emissions ranging from 0.861 to 0.998, categorized as excellent in terms of rRMSE, with all values below 10%.

JOURNAL OF CLEANER PRODUCTION (2021)

Article Thermodynamics

Experimental investigations on diesel engine using alumina nanoparticle fuel additive

Mohammed S. Gad et al.

Summary: Experimental work showed that adding 40 ppm alumina nanoparticles to diesel fuel can enhance thermal efficiency, reduce specific fuel consumption, and decrease emissions of smoke, HC, CO, and NOX. The addition of nanoparticles also improved fuel stability and prevented atomization problems and injector clogging.

ADVANCES IN MECHANICAL ENGINEERING (2021)

Article Engineering, Multidisciplinary

Effect of injection parameters and producer gas derived from redgram stalk on the performance and emission characteristics of a diesel engine

K. M. Akkoli et al.

Summary: By altering the geometry of the injector nozzle, the study investigated the performance and emission characteristics of a dual-fuel engine under different operating conditions, identifying the optimal parameter combinations. The results showed that a 4-hole nozzle is suitable for Diesel-PG operation, while a 6-hole nozzle is ideal for HOME-PG operation, resulting in improved performance and reduced emissions.

ALEXANDRIA ENGINEERING JOURNAL (2021)

Article Energy & Fuels

Ignition analysis on neat alcohols and biodiesel blends propelled research compression ignition engine

Yuvarajan Devarajan et al.

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2020)

Article Green & Sustainable Science & Technology

Numerical study on the application of biodiesel and bioethanol in a multiple injection diesel engine

Asgar Asadi et al.

RENEWABLE ENERGY (2020)

Review Chemistry, Physical

Nanoparticles favorable effects on performance of thermal storage units

M. Sheikholeslami et al.

JOURNAL OF MOLECULAR LIQUIDS (2020)

Article Energy & Fuels

Emission analysis of diesel and butanol blends in research diesel engine

Nivin Joy et al.

PETROLEUM SCIENCE AND TECHNOLOGY (2020)

Article Green & Sustainable Science & Technology

The effect of ethanol-methanol-diesel-microalgae blends on performance, combustion and emissions of a direct injection diesel engine

Tikendra Nath Verma et al.

SUSTAINABLE ENERGY TECHNOLOGIES AND ASSESSMENTS (2020)

Article Engineering, Environmental

Optimal utilization of ZnO nanoparticles blended diesel-water emulsion by varying compression ratio of a VCR diesel engine

R. Hussain Vali et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2020)

Article Energy & Fuels

Emission and performance analysis of pentanol-diesel blends in unmodified diesel engine

A. Prabhu et al.

INTERNATIONAL JOURNAL OF AMBIENT ENERGY (2020)

Article Green & Sustainable Science & Technology

Simultaneous reduction of CO and NOx emissions as well as fuel consumption by using water and nano particles in Diesel-Biodiesel blend

Ayat Gharehghani et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Article Chemistry, Physical

Nanophotonic energy storage in upconversion nanoparticles

Mingzi Sun et al.

NANO ENERGY (2019)

Review Chemistry, Multidisciplinary

Nanoparticle Characterization: What to Measure?

Mario M. Modena et al.

ADVANCED MATERIALS (2019)

Article Environmental Sciences

Performance and emission reduction characteristics of cerium oxide nanoparticle-water emulsion biofuel in diesel engine with modified coated piston

Elumalai Perumal Venkatesan et al.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2019)

Article Thermodynamics

Emission study of a diesel engine fueled with higher alcohol-biodiesel blended fuels

Sivasubramanian Rathinam et al.

INTERNATIONAL JOURNAL OF GREEN ENERGY (2019)

Review Energy & Fuels

Microalgae Biodiesel as a Valuable Alternative to Fossil Fuels

Sayyed Shahryar Rahpeyma et al.

BIOENERGY RESEARCH (2019)

Article Energy & Fuels

Investigation on emission characteristics of alcohol biodiesel blended diesel engine

K. N. Balan et al.

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2019)

Review Thermodynamics

Impacts of additives on performance and emission characteristics of diesel engines during steady state operation

Esmail Khalife et al.

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2017)

Review Green & Sustainable Science & Technology

Production, characterization and performance of biodiesel as an alternative fuel in diesel engines - A review

H. M. Mahmudul et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)

Review Green & Sustainable Science & Technology

A comprehensive review on combustion and stability aspects of metal nanoparticles and its additive effect on diesel and biodiesel fuelled CI engine

Vishal Saxena et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)

Article Green & Sustainable Science & Technology

Performance and emission characteristics of a CI engine fuelled with carbon nanotubes and diesel-biodiesel blends

Seyyed Hassan Hosseini et al.

RENEWABLE ENERGY (2017)

Proceedings Paper Energy & Fuels

Application of blend fuels in a diesel engine

A. M. Liaquat et al.

2011 2ND INTERNATIONAL CONFERENCE ON ADVANCES IN ENERGY ENGINEERING (ICAEE) (2012)

Article Thermodynamics

Effects of butanol-diesel fuel blends on the performance and emissions of a high-speed DI diesel engine

D. C. Rakopoulos et al.

ENERGY CONVERSION AND MANAGEMENT (2010)

Review Thermodynamics

Metal particle combustion and nanotechnology

Richard A. Yetter et al.

PROCEEDINGS OF THE COMBUSTION INSTITUTE (2009)

Article Green & Sustainable Science & Technology

Effect of injection timing on the exhaust emissions of a diesel engine using diesel-methanol blends

Cenk Sayin et al.

RENEWABLE ENERGY (2009)

Article Green & Sustainable Science & Technology

Performance and emission characteristics of a diesel engine using isobutanol-diesel fuel blends

Murat Karabektas et al.

RENEWABLE ENERGY (2009)

Article Thermodynamics

Biofuels sources, biofuel policy, biofuel economy and global biofuel projections

Ayhan Demirbas

ENERGY CONVERSION AND MANAGEMENT (2008)

Article Physics, Applied

Carbon nanoadditives to enhance latent energy storage of phase change materials

Shadab Shaikh et al.

JOURNAL OF APPLIED PHYSICS (2008)