Related references
Note: Only part of the references are listed.Aqueous Ni-rich-cathode dispersions processed with phosphoric acid for lithium-ion batteries with ultra-thick electrodes
Alexander Kukay et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)
A review on the stability and surface modification of layered transition-metal oxide cathodes
Ju-Myung Kim et al.
MATERIALS TODAY (2021)
Heated Calendering of Cathodes for Lithium-Ion Batteries with Varied Carbon Black and Binder Contents
Chris Meyer et al.
ENERGY TECHNOLOGY (2020)
Tuning the Li/Ni Disorder of the NMC811 Cathode by Thermally Driven Competition between Lattice Ordering and Structure Decomposition
Ting Wang et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2020)
Towards Understanding of Cracking during Drying of Thick Aqueous-Processed LiNi0.8Mn0.1Co0.1O2 Cathodes
Ritu Sahore et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)
Lithium and transition metal dissolution due to aqueous processing in lithium-ion battery cathode active materials
W. Blake Hawley et al.
JOURNAL OF POWER SOURCES (2020)
Surface Modification of LiNi0.8Co0.15Al0.05O2Particles via Li3PO4Coating to Enable Aqueous Electrode Processing
Michael Hofmann et al.
CHEMSUSCHEM (2020)
Correlating the influence of porosity, tortuosity, and mass loading on the energy density of LiNi0.6Mn0.2Co0.2O2 cathodes under extreme fast charging (XFC) conditions
Dhrupad Parikh et al.
JOURNAL OF POWER SOURCES (2020)
Effects of surface modification and organic binder type on cell performance of water-processed Ni-rich Li(Ni0.8Co0.1Mn0.1)O2 cathodes
Sireesha Pedaballi et al.
JOURNAL OF POWER SOURCES (2020)
Effects of Extended Aqueous Processing on Structure, Chemistry, and Performance of Polycrystalline LiNixMnyCozO2 Cathode Powders
Luqman Azhari et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Water-Based Process to the Preparation of Nickel-Rich Li(Ni0.8Co0.1Mn0.1)O2 Cathode
Jia-He Kuo et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)
Chemical stability and long-term cell performance of low-cobalt, Ni-Rich cathodes prepared by aqueous processing for high-energy Li-Ion batteries
Marissa Wood et al.
ENERGY STORAGE MATERIALS (2020)
Surface double coating of a LiNiaCobAl1-a-bO2 (a > 0.85) cathode with TiOx and Li2CO3 to apply a water-based hybrid polymer binder to Li-ion batteries
Tatsuya Watanabe et al.
RSC ADVANCES (2020)
Basic knowledge in battery research bridging the gap between academia and industry
Makoto Ue et al.
MATERIALS HORIZONS (2020)
Study of Immersion of LiNi0.5Mn0.3Co0.2O2 Material in Water for Aqueous Processing of Positive Electrode for Li-Ion Batteries
Marie Bichon et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Effects of pH control by acid addition at the aqueous processing of cathodes for lithium ion batteries
Werner Bauer et al.
ELECTROCHIMICA ACTA (2019)
Towards water based ultra-thick Li ion battery electrodes - A binder approach
Lukas Ibing et al.
JOURNAL OF POWER SOURCES (2019)
Electrode manufacturing for lithium-ion batteries-Analysis of current and next generation processing
W. Blake Hawley et al.
JOURNAL OF ENERGY STORAGE (2019)
Beneficial rheological properties of lithium-ion battery cathode slurries from elevated mixing and coating temperatures
W. Blake Hawley et al.
JOURNAL OF ENERGY STORAGE (2019)
Achievement of the High-Capacity Retention Rate for the Li[Ni0.8Co0.15Al0.05]O2 (NCA) Cathode Containing an Aqueous Binder with CO2 Gas Treatment Using the Cavitation Effect (CTCE)
Katsuya Kimura et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)
Increased Cycling Performance of Li-Ion Batteries by Phosphoric Acid Modified LiNi0.5Mn1.5O4 Cathodes in the Presence of LiBOB
Maheeka Yapa Abeywardana et al.
INTERNATIONAL JOURNAL OF ELECTROCHEMISTRY (2019)
A Practical Beginner's Guide to Cyclic Voltammetry
Noemie Elgrishi et al.
JOURNAL OF CHEMICAL EDUCATION (2018)
Comparative Analysis of Aqueous Binders for Acid High-Energy Li-Rich NMC as a Lithium-Ion Cathode and the Impact of Adding Phosphoric
Arefeh Kazzazi et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Complementary Strategies Toward the Aqueous Processing of High-Voltage LiNi0.5Mn1.5O4 Lithium-Ion Cathodes
Matthias Kuenzel et al.
CHEMSUSCHEM (2018)
Water-based LiNi1/3Mn1/3Co1/3O2-cathodes with good electrochemical performance by use of additives
Michaela Memm et al.
ELECTROCHIMICA ACTA (2018)
What makes lithium substituted polyacrylic acid a better binder than polyacrylic acid for silicon-graphite composite anodes?
Kevin A. Hays et al.
JOURNAL OF POWER SOURCES (2018)
Improvement of the Cyclability and Coulombic Efficiency of Li-Ion Batteries Using Li[Ni0.8Co0.15Al0.05]O2 Cathode Containing an Aqueous Binder with Pressurized CO2 Gas Treatment
Katsuya Kimura et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)
Performance and cost of materials for lithium-based rechargeable automotive batteries
Richard Schmuch et al.
NATURE ENERGY (2018)
Dependence of Cell Failure on Cut-Off Voltage Ranges and Observation of Kinetic Hindrance in LiNi0.8Co0.15Al0.05O2
Jing Li et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)
Extending the Service Life of High-Ni Layered Oxides by Tuning the Electrode-Electrolyte Interphase
Jianyu Li et al.
ADVANCED ENERGY MATERIALS (2018)
Technical and economic analysis of solvent-based lithium-ion electrode drying with water and NMP
David L. Wood et al.
DRYING TECHNOLOGY (2018)
Alternative binders for sustainable electrochemical energy storage - the transition to aqueous electrode processing and bio-derived polymers
Dominic Bresser et al.
ENERGY & ENVIRONMENTAL SCIENCE (2018)
Toward Low-Cost, High-Energy Density, and High-Power Density Lithium-Ion Batteries
Jianlin Li et al.
JOM (2017)
Investigation on xanthan gum as novel water soluble binder for LiFePO4 cathode in lithium-ion batteries
Jiarong He et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Enabling aqueous processing for crack-free thick electrodes
Zhijia Du et al.
JOURNAL OF POWER SOURCES (2017)
Chemical Weathering of Layered Ni-Rich Oxide Electrode Materials: Evidence for Cation Exchange
Ilya A. Shkrob et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)
Design and Demonstration of Three-Electrode Pouch Cells for Lithium-Ion Batteries
Seong Jin An et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)
Synthesis of water-resistant thin TiOx layer-coated high-voltage and high-capacity LiNiaCobAl1-a-bO2 (a > 0.85) cathode and its cathode performance to apply a water-based hybrid polymer binder to Li-Ion batteries
Toyokazu Tanabe et al.
ELECTROCHIMICA ACTA (2017)
Nickel-Rich and Lithium-Rich Layered Oxide Cathodes: Progress and Perspectives
Arumugam Manthiram et al.
ADVANCED ENERGY MATERIALS (2016)
In Situ Coating of Li[Ni0.33Mn0.33Co0.33]O2 Particles to Enable Aqueous Electrode Processing
Nicholas Loeffler et al.
CHEMSUSCHEM (2016)
The application of a water-based hybrid polymer binder to a high-voltage and high-capacity Li-rich solid-solution cathode and its performance in Li-ion batteries
Kouhei Notake et al.
JOURNAL OF APPLIED ELECTROCHEMISTRY (2016)
Understanding electrochemical potentials of cathode materials in rechargeable batteries
Chaofeng Liu et al.
MATERIALS TODAY (2016)
Study of Water-Based Lithium Titanate Electrode Processing: The Role of pH and Binder Molecular Structure
Diogo Vieira Carvalho et al.
POLYMERS (2016)
Evaluation Residual Moisture in Lithium-Ion Battery Electrodes and Its Effect on Electrode Performance
Jianlin Li et al.
MRS ADVANCES (2016)
Prospects for reducing the processing cost of lithium ion batteries
David L. Wood et al.
JOURNAL OF POWER SOURCES (2015)
Lithium Polyacrylate (LiPAA) as an Advanced Binder and a Passivating Agent for High-Voltage Li-Ion Batteries
Nicholas P. W. Pieczonka et al.
ADVANCED ENERGY MATERIALS (2015)
A hydrolysis-hydrothermal route for the synthesis of ultrathin LiAlO2-inlaid LiNi0.5Co0.2Mn0.3O2 as a high-performance cathode material for lithium ion batteries
Lingjun Li et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
Processing of water-based LiNi1/3Mn1/3Co1/3O2 pastes for manufacturing lithium ion battery cathodes
Fatih A. Cetinel et al.
BULLETIN OF MATERIALS SCIENCE (2014)
Corrosion of aluminum electrodes in aqueous slurries for lithium-ion batteries
Benjamin C. Church et al.
JOURNAL OF MATERIALS SCIENCE (2014)
A comparative study of different binders and their effects on electrochemical properties of LiMn2O4 cathode in lithium ion batteries
Zhian Zhang et al.
JOURNAL OF POWER SOURCES (2014)
Investigations on high energy lithium-ion batteries with aqueous binder
Qingliu Wu et al.
ELECTROCHIMICA ACTA (2013)
Optimization of multicomponent aqueous suspensions of lithium iron phosphate (LiFePO4) nanoparticles and carbon black for lithium-ion battery cathodes
Jianlin Li et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2013)
Comparison of the structural and electrochemical properties of layered Li[NixCoyMnz]O2 (x=1/3, 0.5, 0.6, 0.7, 0.8 and 0.85) cathode material for lithium-ion batteries
Hyung-Joo Noh et al.
JOURNAL OF POWER SOURCES (2013)
Lithium Ion Cell Performance Enhancement Using Aqueous LiFePO4 Cathode Dispersions and Polyethyleneimine Dispersant
Jianlin Li et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2013)
An Artificial Solid Electrolyte Interphase Enables the Use of a LiNi0.5Mn1.5O4 5 V Cathode with Conventional Electrolytes
Juchuan Li et al.
ADVANCED ENERGY MATERIALS (2013)
Interactions between organic additives and active powders in water-based lithium iron phosphate electrode slurries
Chia-Chen Li et al.
JOURNAL OF POWER SOURCES (2012)
Thermal runaway caused fire and explosion of lithium ion battery
Qingsong Wang et al.
JOURNAL OF POWER SOURCES (2012)
Superior Performance of LiFePO4 Aqueous Dispersions via Corona Treatment and Surface Energy Optimization
Jianlin Li et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2012)
Optimization of LiFePO4 Nanoparticle Suspensions with Polyethyleneimine for Aqueous Processing
Jianlin Li et al.
LANGMUIR (2012)
A comparative study of polyacrylic acid and poly(vinylidene difluoride) binders for spherical natural graphite/LiFePO4 electrodes and cells
Jin Chong et al.
JOURNAL OF POWER SOURCES (2011)
Use of natural binders and ionic liquid electrolytes for greener and safer lithium-ion batteries
G. T. Kim et al.
JOURNAL OF POWER SOURCES (2011)
Preparation and performances of LiFePO4 cathode in aqueous solvent with polyacrylic acid as a binder
Z. P. Cai et al.
JOURNAL OF POWER SOURCES (2009)
Effect of carboxymethyl cellulose on aqueous processing of LiFePO4 cathodes and their electrochemical performance
Jin-Hyon Lee et al.
ELECTROCHEMICAL AND SOLID STATE LETTERS (2008)
Dispersion properties of aqueous-based LiFePO4 pastes and their electrochemical performance for lithium batteries
Jin-Hyon Lee et al.
ULTRAMICROSCOPY (2008)
Improvements of dispersion homogeneity and cell performance of aqueous-processed LiCoO2 cathodes by using dispersant of PAA-NH4
CC Li et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2006)
Effects of PAA-NH4 addition on the dispersion property of aqueous LiCoO2 slurries and the cell performance of As-prepared LiCoO2 cathodes
CC Li et al.
ELECTROCHEMICAL AND SOLID STATE LETTERS (2005)