Related references
Note: Only part of the references are listed.Microstructure, mechanical and tribological properties of multilayer Ti-DLC thick films on Al alloys by filtered cathodic vacuum arc technology
Hongshuai Cao et al.
MATERIALS & DESIGN (2021)
Tribochemical mechanism of superlubricity in graphene quantum dots modified DLC films under high contact pressure
Xuan Yin et al.
CARBON (2021)
Fabrication of superhydrophobic layered double hydroxide composites to enhance the corrosion-resistant performances of epoxy coatings on Mg alloy
Kunyao Cao et al.
SURFACE & COATINGS TECHNOLOGY (2021)
Tribomechanical properties of hard Cr-doped DLC coatings deposited by low-frequency HiPIMS
J. A. Santiago et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Immersion corrosion and electrochemical performances of laser cladded FeSiB, FeSiBCr and FeSiBCrMo coatings in 3.5 wt% NaCl solution
Jiali Zhou et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Electrochemical and tribocorrosion performances of CrMoSiCN coating on Ti-6Al-4V titanium alloy in artificial seawater
Yongqiang Fu et al.
CORROSION SCIENCE (2020)
Comprehensive structural, nanomechanical and tribological evaluation of silver doped DLC thin film coating with chromium interlayer (Ag-DLC/Cr) for biomedical application
Lokeswar Patnaik et al.
CERAMICS INTERNATIONAL (2020)
Comparative study on protective properties of CrN coatings on the ABS substrate by DCMS and HiPIMS techniques
Dong Zhang et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Improving structural, tribological and electrochemical properties of Ti6Al4V alloy with B-doped TiO2 thin films
A. Celik et al.
TRIBOLOGY INTERNATIONAL (2020)
Corrosion and tribocorrosion behavior of W doped DLC coating in artificial seawater
Lei Cao et al.
DIAMOND AND RELATED MATERIALS (2020)
Study of the oxidation behavior of CrN coating on Zr alloy in air
Chuiyi Meng et al.
JOURNAL OF NUCLEAR MATERIALS (2019)
Experimental investigation on chromium-diamond like carbon (Cr-DLC) coating through plasma enhanced chemical vapour deposition (PECVD) on the nozzle needle surface
A. Muthuraja et al.
DIAMOND AND RELATED MATERIALS (2019)
Microstructure and corrosion behaviour of laser-cladding Al-Ni-TiC-CeO2 composite coatings on S355 offshore steel
X. He et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Synthesis and electrochemical properties of Ti-doped DLC films by a hybrid PVD/PECVD process
Yeong Ju Jo et al.
APPLIED SURFACE SCIENCE (2018)
Comparative corrosion resistance properties between (Cu, Ce)-DLC and Ti co-doped (Cu, Ce)/Ti-DLC films prepared via magnetron sputtering method
Yangmin Wu et al.
CHEMICAL PHYSICS LETTERS (2018)
The friction and wear performance of DLC coatings deposited on plasma nitrided AISI 4140 steel by magnetron sputtering under air and vacuum conditions
H. Kovaci et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Study of the electrochemical behavior of a Ti6Al4V alloy modified by heat treatments and chemical conversion
J. F. Flores-Alvarez et al.
SURFACE & COATINGS TECHNOLOGY (2017)
Corrosion resistance of low-carbon steel modified by plasma nitriding and diamond-like carbon
Cleber Pereira Fenili et al.
DIAMOND AND RELATED MATERIALS (2017)
Inhibition effect of imidazoline inhibitor on the crevice corrosion of N80 carbon steel in the CO2-saturated NaCl solution containing acetic acid
Y. Z. Li et al.
CORROSION SCIENCE (2017)
Structural evaluation, preliminary in vitro stability and electrochemical behavior of apatite coatings on Ti6Al4V substrates
Yaser E. Greish et al.
CERAMICS INTERNATIONAL (2016)
Silver-doped nanocomposite carbon coatings (Ag-DLC) for biomedical applications - Physiochemical and biological evaluation
Dorota Bociaga et al.
APPLIED SURFACE SCIENCE (2015)
A comparison of corrosion, tribocorrosion and electrochemical impedance properties of pure Ti and Ti6Al4V alloy treated by micro-arc oxidation process
M. Fazel et al.
APPLIED SURFACE SCIENCE (2015)
Characterization of thick and soft DLC coatings deposited on plasma nitrided austenitic stainless steel
Eugenia L. Dalibon et al.
DIAMOND AND RELATED MATERIALS (2015)
The influence of substrate bias voltages on structure, mechanical properties and anti-corrosion performance of Cr doped diamond-like carbon films deposited by steered cathodic arc evaporation
Chih-Hao Liang et al.
THIN SOLID FILMS (2015)
Electrochemical studies and growth of apatite on molybdenum doped DLC coatings on titanium alloy β-21S
C. Anandan et al.
APPLIED SURFACE SCIENCE (2014)
Electrochemistry properties of multilayer TiN/Ti coatings on NiTi alloy for cardiac occluder application
A. L. Shao et al.
SURFACE & COATINGS TECHNOLOGY (2013)
Evaluation of the mechanical behaviour of a DLC film on plasma nitrided AISI 420 with different surface finishing
Eugenia L. Dalibon et al.
SURFACE & COATINGS TECHNOLOGY (2013)
Tribological properties of Ti-doped DLC coatings under ionic liquids lubricated conditions
Xin Feng et al.
APPLIED SURFACE SCIENCE (2012)
Study on salt spray corrosion of Ni-graphite abradable coating with 80Ni20Al and 96NiCr-4Al as bonding layers
Cunguan Xu et al.
SURFACE & COATINGS TECHNOLOGY (2011)
Electrochemical study of growth behaviour of plasma electrolytic oxidation coating on Ti6AI4V: Effects of the additive
X. L. Zhang et al.
CORROSION SCIENCE (2010)
Preparation, characterization and properties of Cr-incorporated DLC films on magnesium alloy
Wei Dai et al.
DIAMOND AND RELATED MATERIALS (2010)
Effects of N-doping on the microstructure, mechanical and tribological behavior of Cr-DLC films
Sunil K. Pal et al.
SURFACE & COATINGS TECHNOLOGY (2007)
Electrokinetic energy conversion efficiency in nanofluidic channels
Frank H. J. van der Heyden et al.
NANO LETTERS (2006)
Corrosion performance of diamond-like carbon (DLC)-coated Ti alloy in the simulated body fluid environment
HG Kim et al.
DIAMOND AND RELATED MATERIALS (2005)
Tribological behavior of DLC coatings with functionally gradient interfaces
Y Liu et al.
SURFACE & COATINGS TECHNOLOGY (2002)