Related references
Note: Only part of the references are listed.Microstructure, mechanical and tribological properties of multilayer Ti-DLC thick films on Al alloys by filtered cathodic vacuum arc technology
Hongshuai Cao et al.
MATERIALS & DESIGN (2021)
Deposition of DLC films on the inner wall of U-type pipes by hollow cathode PECVD
Xubing Wei et al.
DIAMOND AND RELATED MATERIALS (2021)
Effect of bias voltage on the microstructure and properties of Nb-DLC films prepared by a hybrid sputtering system
Ji Cheng Ding et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Soft and thick DLC deposited on AISI 316L stainless steel with nitriding as pre-treatment tested in severe wear conditions
Eugenia L. Dalibon et al.
DIAMOND AND RELATED MATERIALS (2020)
Anti-sand erosion and tribological performance of thick DLC coatings deposited by the filtered cathodic vacuum arc
Yongqing Shen et al.
APPLIED SURFACE SCIENCE (2020)
Study on conductivity and corrosion resistance of N-doped and Cr/N co-doped DLC films on bipolar plates for PEMFC
Hongming Dong et al.
DIAMOND AND RELATED MATERIALS (2020)
Wear performance of DLC coating on plasma nitrided Astaloy Mo
Mahsa Haji Ghasemi et al.
DIAMOND AND RELATED MATERIALS (2019)
Excellent mechanical, tribological and anti-corrosive performance of novel Ti-DLC nanocomposite thin films prepared via magnetron sputtering method
Shidong Zhang et al.
CARBON (2019)
Comparison between corrosion behaviour of DLC and N-DLC coatings deposited by DC-pulsed PACVD technique
Omid Sharifahmadian et al.
DIAMOND AND RELATED MATERIALS (2019)
Synergistic effect of plasma nitriding and bias voltage on the adhesion of diamond-like carbon coatings on M2 steel by PECVD
A. Moreno-Barcenas et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Microstructural and tribological characterization of DLC coating by in-situ duplex plasma nitriding and arc ion plating
Rui Lan et al.
DIAMOND AND RELATED MATERIALS (2019)
Characterization of DLC coatings over nitrided stainless steel with and without nitriding pre-treatment using annealing cycles
Eugenia. L. Dalibon et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)
Microstructure and high-temperature tribological properties of Si-doped hydrogenated diamond-like carbon films
Teng Fei Zhang et al.
APPLIED SURFACE SCIENCE (2018)
Tribological behavior of DLC films and duplex ceramic coatings under different sliding conditions
Halim Kovaci et al.
CERAMICS INTERNATIONAL (2018)
Effect of substrate bias on microstructure and mechanical properties of WC-DLC coatings deposited by HiPIMS
Lei Wang et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Microstructure, tribological and cutting performance of Ti-DLC/alpha-C:H multilayer film on cemented carbide
Lei Huang et al.
SURFACE & COATINGS TECHNOLOGY (2018)
The relation between aging temperature, microstructure evolution and hardening of Custom 465® stainless steel
Sigalit Ifergane et al.
MATERIALS CHARACTERIZATION (2017)
Tribological response and characterization of Mo-W doped DLC coating
Itzel Castillo Muller et al.
WEAR (2017)
Corrosion resistance of low-carbon steel modified by plasma nitriding and diamond-like carbon
Cleber Pereira Fenili et al.
DIAMOND AND RELATED MATERIALS (2017)
Comparative study on structure and wetting properties of diamond-like carbon films by W and Cu doping
Lili Sun et al.
DIAMOND AND RELATED MATERIALS (2017)
Plasma Nitriding and DLC Coatings for Corrosion Protection of Precipitation Hardening Stainless Steel
Eugenia L. Dalibon et al.
ADVANCED ENGINEERING MATERIALS (2016)
Effect of hybrid surface treatment composed of nitriding and DLC coating on friction-wear properties and fatigue strength of alloy steel
Tatsuro Morita et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Further improving the mechanical and tribological properties of low content Ti-doped DLC film by W incorporating
Kaixiong Gao et al.
APPLIED SURFACE SCIENCE (2015)
Hydrogen diffusivity measurement and microstructural characterization of Custom 465 stainless steel
S. Ifergane et al.
ELECTROCHIMICA ACTA (2015)
A linear friction welding process model for Carpenter Custom 465 precipitation-hardened martensitic stainless steel: A weld microstructure-evolution analysis
Mica Grujicic et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2015)
The stability of DLC film on nitrided CoCrMo alloy in phosphate buffer solution
T. F. Zhang et al.
APPLIED SURFACE SCIENCE (2014)
Influence of W content on microstructural, mechanical and tribological properties of sulfurized W-doped diamond-like carbon coatings
Wen Yue et al.
SURFACE & COATINGS TECHNOLOGY (2013)
Evaluation of the mechanical behaviour of a DLC film on plasma nitrided AISI 420 with different surface finishing
Eugenia L. Dalibon et al.
SURFACE & COATINGS TECHNOLOGY (2013)
Optimising deposition parameters of W-DLC coatings for tool materials of high speed steel and cemented carbide
Andrzej Czyzniewski
VACUUM (2012)
Diamond-like carbon film deposited on nitrided 316L stainless steel substrate: A hardness depth-profile modeling
D. Chicot et al.
DIAMOND AND RELATED MATERIALS (2011)
Structure and characterization of the multilayered Ti-DLC films by FCVA
Yu-Hung Lin et al.
DIAMOND AND RELATED MATERIALS (2010)
Corrosion behavior of martensitic and precipitation hardening stainless steels treated by plasma nitriding
Sonia P. Bruhl et al.
SURFACE & COATINGS TECHNOLOGY (2010)
Improving tribological properties of Ti6Al4V alloy with duplex surface treatment
A. F. Yetim et al.
SURFACE & COATINGS TECHNOLOGY (2010)
Properties of W incorporated diamond-like carbon films prepared by pulsed-laser deposition
Wang Xuemin et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
XPS and TEM study of W-DLC/DLC double-layered film
Takanori Takeno et al.
THIN SOLID FILMS (2009)
Densification of AISI M2 high speed steel by means of capacitor discharge sintering (CDS)
A. Fais et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
Flexible, Stretchable, Transparent Carbon Nanotube Thin Film Loudspeakers
Lin Xiao et al.
NANO LETTERS (2008)
Effect of the ion nitriding surface hardening process on fatigue behavior of AISI 4340 steel
Sule Yidiz Sirin et al.
MATERIALS CHARACTERIZATION (2008)
Microstructure and physical properties of DLC films deposited by laser induced high current pulsed arc deposition
Jin-Bao Wu et al.
THIN SOLID FILMS (2008)
A perspective on the optimisation of hard carbon and related coatings for engineering applications
Stephane Neuville et al.
THIN SOLID FILMS (2007)
Improving the surface properties of A286 precipitation-hardening stainless steel by low-temperature plasma nitriding
M. Esfandiari et al.
SURFACE & COATINGS TECHNOLOGY (2007)
DLC based coatings prepared by reactive d.c. magnetron sputtering
K Bewilogua et al.
THIN SOLID FILMS (2004)
Review of the filtered vacuum arc process and materials deposition
PJ Martin et al.
THIN SOLID FILMS (2001)
Share Paper
