Related references
Note: Only part of the references are listed.On the effect of build orientation and residual stress on the corrosion of 316L stainless steel prepared by selective laser melting
G. Sander et al.
CORROSION SCIENCE (2021)
On the dynamic passivity and corrosion resistance of a low cost and low density multi-principal-element alloy produced via commodity metals
S. Choudhary et al.
ELECTROCHEMISTRY COMMUNICATIONS (2021)
Electrochemical studies on the effect of residual stress on the corrosion of 316L manufactured by selective laser melting
V. Cruz et al.
CORROSION SCIENCE (2020)
The passivity of selective laser melted 316L stainless steel
Decheng Kong et al.
APPLIED SURFACE SCIENCE (2020)
Unanticipated drastic decline in pitting corrosion resistance of additively manufactured 316L stainless steel after high-temperature post-processing
Majid Laleh et al.
CORROSION SCIENCE (2020)
Corrosion and metal release investigations of selective laser melted 316L stainless steel in a synthetic physiological fluid containing proteins and in diluted hydrochloric acid
Masoud Atapour et al.
ELECTROCHIMICA ACTA (2020)
Element-resolved electrochemical analysis of transpassive dissolution and repassivation behavior of the multi-principal element alloy AlTiVCr
S. Choudhary et al.
ELECTROCHIMICA ACTA (2020)
Real-time dissolution of a compositionally complex alloy using inline ICP and correlation with XPS
Yao Qiu et al.
NPJ MATERIALS DEGRADATION (2020)
The contribution of Cr and Mo to the passivation of Ni22Cr and Ni22Cr10Mo alloys in sulfuric acid
Xuejie Li et al.
CORROSION SCIENCE (2020)
The enhancement of microstructure on the passive and pitting behaviors of selective laser melting 316L SS in simulated body fluid
Cheng Man et al.
APPLIED SURFACE SCIENCE (2019)
Molybdenum surface enrichment and release during transpassive dissolution of Ni-based alloys
Jeffrey D. Henderson et al.
CORROSION SCIENCE (2019)
Investigating ion release using inline ICP during in situ scratch testing of an Mg-Li(-Al-Y-Zr) alloy
Yuanming Yan et al.
ELECTROCHEMISTRY COMMUNICATIONS (2019)
Atomic Emission Spectroelectrochemistry: Real-Time Rate Measurements of Dissolution, Corrosion, and Passivation
Kevin Ogle
CORROSION (2019)
Mechanisms of Cr and Mo Enrichments in the Passive Oxide Film on 316L Austenitic Stainless Steel
Zuocheng Wang et al.
FRONTIERS IN MATERIALS (2019)
Microscale residual stresses in additively manufactured stainless steel
Wen Chen et al.
NATURE COMMUNICATIONS (2019)
Additively manufactured hierarchical stainless steels with high strength and ductility
Y. Morris Wang et al.
NATURE MATERIALS (2018)
Corrosion Behavior of 316L Stainless Steel Fabricated by Selective Laser Melting Under Different Scanning Speeds
Xiaoqing Ni et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2018)
Clarifying the Dissolution Mechanisms and Electrochemistry of Mg2Si as a Function of Solution pH
O. Gharbi et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)
Dislocation network in additive manufactured steel breaks strength-ductility trade-off
Leifeng Liu et al.
MATERIALS TODAY (2018)
Additive manufacturing of metallic components - Process, structure and properties
T. DebRoy et al.
PROGRESS IN MATERIALS SCIENCE (2018)
Corrosion of Additively Manufactured Alloys: A Review
G. Sander et al.
CORROSION (2018)
Corrosion behavior of additively manufactured 316L stainless steel in acidic media
M. J. K. Lodhi et al.
MATERIALIA (2018)
Effect of Microstructural Anisotropy on the Electrochemical Behavior of Rolled Mild Steel
S. Choudhary et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2017)
On The Corrosion and Metastable Pitting Characteristics of 316L Stainless Steel Produced by Selective Laser Melting
G. Sander et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)
On the enhanced corrosion resistance of a selective laser melted austenitic stainless steel
Qi Chao et al.
SCRIPTA MATERIALIA (2017)
Effect of time on the characteristics of passive film formed on stainless steel
Ruijing Jiang et al.
APPLIED SURFACE SCIENCE (2017)
Additive Manufacturing Processes: Selective Laser Melting, Electron Beam Melting and Binder JettingSelection Guidelines
Prashanth Konda Gokuldoss et al.
MATERIALS (2017)
Mechanism of dislocation channel-induced irradiation assisted stress corrosion crack initiation in austenitic stainless steel
M. D. McMurtrey et al.
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2015)
The effects of grain refinement and deformation on corrosion resistance of passive film formed on the surface of 304 stainless steels
Lv Jinlong et al.
MATERIALS RESEARCH BULLETIN (2015)
Review of selective laser melting: Materials and applications
C. Y. Yap et al.
APPLIED PHYSICS REVIEWS (2015)
Annealing effects on the corrosion resistance of ultrafine-grained pure titanium
H. S. Kim et al.
CORROSION SCIENCE (2014)
Size matters: Mechanism of metal release from 316L stainless steel particles is governed by size-dependent properties of the surface oxide
Yolanda Hedberg et al.
MATERIALS LETTERS (2014)
The effect of SMAT-induced grain refinement and dislocations on the corrosion behavior of Ti-25Nb-3Mo-3Zr-2Sn alloy
Run Huang et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2013)
Full depth profile of passive films on 316L stainless steel based on high resolution HAXPES in combination with ARXPS
W. Fredriksson et al.
APPLIED SURFACE SCIENCE (2012)
Grain size distribution effects on the corrosion behaviour of materials
Srikant Gollapudi
CORROSION SCIENCE (2012)
Studies on pitting corrosion and sensitization in laser rapid manufactured specimens of type 316L stainless steel
P. Ganesh et al.
MATERIALS & DESIGN (2012)
Resolving surface chemical states in XPS analysis of first row transition metals, oxides and hydroxides: Cr, Mn, Fe, Co and Ni
Mark C. Biesinger et al.
APPLIED SURFACE SCIENCE (2011)
Effect of grain size on corrosion of high purity aluminium
K. D. Ralston et al.
ELECTROCHIMICA ACTA (2011)
The cathodic dissolution of Al, Al2Cu, and Al alloys
K. Ogle et al.
ELECTROCHIMICA ACTA (2011)
Effect of Grain Size on Corrosion: A Review
K. D. Ralston et al.
CORROSION (2010)
The anodic and cathodic dissolution of Al and Al-Cu-Mg alloy
M. Mokaddem et al.
ELECTROCHIMICA ACTA (2010)
Revealing the relationship between grain size and corrosion rate of metals
K. D. Ralston et al.
SCRIPTA MATERIALIA (2010)
Atomic emission spectroelectrochemistry applied to dealloying phenomena: I. The formation and dissolution of residual copper films on stainless steel
K. Ogle et al.
ELECTROCHIMICA ACTA (2009)
Pitting corrosion behaviour of austenitic stainless steels - combining effects of Mn and Mo additions
A. Pardo et al.
CORROSION SCIENCE (2008)
Effect of nickel alloying on crevice corrosion resistance of stainless steels
S Azuma et al.
CORROSION SCIENCE (2004)
Passive films on stainless steels - chemistry, structure and growth
COA Olsson et al.
ELECTROCHIMICA ACTA (2003)
On the pitting corrosion resistance of nitrogen alloyed cold worked austenitic stainless steels
UK Mudali et al.
CORROSION SCIENCE (2002)
Anodic dissolution of 304 stainless steel using atomic emission spectroelectrochemistry
K Ogle et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2000)
Stability, reactivity and breakdown of passive films. Problems of recent and future research
JW Schultze et al.
ELECTROCHIMICA ACTA (2000)