Related references
Note: Only part of the references are listed.Microstructural homogeneity and mechanical behavior of a selective laser melted Ti-35Nb alloy produced from an elemental powder mixture
Jincheng Wang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)
Degradation behavior of Ti-Nb alloys: Corrosion behavior through 21 days of immersion and tribocorrosion behavior against alumina
I. Caha et al.
CORROSION SCIENCE (2020)
Surface Modification of Titanium and Titanium Alloys: Technologies, Developments, and Future Interests
Lai-Chang Zhang et al.
ADVANCED ENGINEERING MATERIALS (2020)
Correlations between the inhibition performances and the inhibitor structures of some azoles on the galvanic corrosion of copper coupled with silver in artificial seawater
Hualiang Huang et al.
CORROSION SCIENCE (2020)
Two and three-dimensional characterisation of localised corrosion affected by lack-of-fusion pores in 316L stainless steel produced by selective laser melting
Majid Laleh et al.
CORROSION SCIENCE (2020)
Different corrosion behaviors between α and β phases of Ti6Al4V in fluoride-containing solutions: Influence of alloying element Al
Hongwei Zhang et al.
CORROSION SCIENCE (2020)
Utilizing an integrated tri-layered scaffold with Titanium-Mesh-Cage base to repair cartilage defects of knee in goat model
Chenjun Zhai et al.
MATERIALS & DESIGN (2020)
In situ fabrication of a titanium-niobium alloy with tailored microstructures, enhanced mechanical properties and biocompatibility by using selective laser melting
Danlei Zhao et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)
Recent Development in Beta Titanium Alloys for Biomedical Applications
Liang-Yu Chen et al.
METALS (2020)
Titanium-Niobium (Ti-xNb) Alloys with High Nb Amounts for Applications in Biomaterials
Bruno Leandro Pereira et al.
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS (2020)
Strengthening mechanism and micropillar analysis of high-strength NiTi-Nb eutectic-type alloy prepared by laser powder bed fusion
Shifeng Liu et al.
COMPOSITES PART B-ENGINEERING (2020)
Enhancement of the corrosion resistance and mechanical properties of nanocrystalline titanium by low-temperature annealing
Agata Sotniczuk et al.
CORROSION SCIENCE (2019)
The passivity of titanium-part III: characterization of the anodic oxide film
Bumwook Roh et al.
JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2019)
Deformation and strength characteristics of Laves phases in titanium alloys
C. D. Rabadia et al.
MATERIALS & DESIGN (2019)
Selective laser melting of Ti-35Nb composite from elemental powder mixture: Microstructure, mechanical behavior and corrosion behavior
J. C. Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Additive manufacturing of dense components in beta-titanium alloys with crystallographic texture from a mixture of pure metallic element powders
Takeshi Nagase et al.
MATERIALS & DESIGN (2019)
Quantitative analysis of local fine structure on diffusion of point defects in passive film on Ti
Lu Wang et al.
ELECTROCHIMICA ACTA (2019)
Tribocorrosion of different biomaterials under reciprocating sliding conditions in artificial saliva
Luis Vilhena et al.
LUBRICATION SCIENCE (2019)
Optimisation of grafted phosphorylcholine-based polymer on additively manufactured titanium substrate for hip arthroplasty
Subir Ghosh et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)
Review on titanium and titanium based alloys as biomaterials for orthopaedic applications
Manmeet Kaur et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)
Improved trade-off between strength and plasticity in titanium based metastable beta type Ti-Zr-Fe-Sn alloys
C. D. Rabadia et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Influence of annealing on microstructure and mechanical properties of ultrafine-grained Ti45Nb
B. Voelker et al.
MATERIALS & DESIGN (2019)
Mechanistic microbiologically influenced corrosion modeling-A review
A. Marciales et al.
CORROSION SCIENCE (2019)
Role of melt pool boundary condition in determining the mechanical properties of selective laser melting AlSi10Mg alloy
Z. H. Xiong et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Resemblance in Corrosion Behavior of Selective Laser Melted and Traditional Monolithic β Ti-24Nb-4Zr-8Sn Alloy
Peng Qin et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2019)
A Review on Biomedical Titanium Alloys: Recent Progress and Prospect
Lai-Chang Zhang et al.
ADVANCED ENGINEERING MATERIALS (2019)
Transformation-induced plasticity and high strength in beta titanium alloy manufactured by selective laser melting
Y. J. Liu et al.
MATERIALIA (2019)
Electrochemical corrosion characteristics and biocompatibility of nanostructured titanium for implants
Jinwen Lu et al.
APPLIED SURFACE SCIENCE (2018)
Corrosion and tribocorrosion behaviour of beta-type Ti-Nb and Ti-Mo surfaces designed by diffusion treatments for biomedical applications
J. Urena et al.
CORROSION SCIENCE (2018)
Corrosion behaviour of CoCrMo alloy fabricated by electron beam melting
Xiaojuan Gong et al.
CORROSION SCIENCE (2018)
Corrosion assessment of Ti-6Al-4V fabricated using laser powder-bed fusion additive manufacturing
Tse-Ming Chiu et al.
ELECTROCHIMICA ACTA (2018)
Localized Corrosion: Passive Film Breakdown vs Pit Growth Stability: Part II. A Model for Critical Pitting Temperature
Tianshu Li et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)
Unmasking chloride attack on the passive film of metals
B. Zhang et al.
NATURE COMMUNICATIONS (2018)
Improved Corrosion Resistance on Selective Laser Melting Produced Ti-5Cu Alloy after Heat Treatment
Peng Qin et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2018)
Improved Corrosion Resistance on Selective Laser Melting Produced Ti-5Cu Alloy after Heat Treatment
Peng Qin et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2018)
Electrochemical behaviour of laser solid formed Ti-6Al-4V alloy in a highly concentrated NaCl solution
Jiaqiang Li et al.
CORROSION SCIENCE (2018)
Electrochemical behaviour of passive film formed on the surface of Ti-6Al-4V alloys fabricated by electron beam melting
Xin Gai et al.
CORROSION SCIENCE (2018)
pH dependent passivation behavior of niobium in acid fluoride-containing solutions
Lei Guan et al.
ELECTROCHIMICA ACTA (2018)
Localized Corrosion: Passive Film Breakdown vs. Pit Growth Stability: Part III. A Unifying Set of Principal Parameters and Criteria for Pit Stabilization and Salt Film Formation
Tianshu Li et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)
Hierarchical Ti-Nb oxide microspheres with synergic multiphase structure as ultra-long-life anode materials for lithium-ion batteries
Guanqin Wang et al.
JOURNAL OF POWER SOURCES (2017)
Corrosion Behavior of Additive Manufactured Ti-6Al-4V Alloy in NaCl Solution
Jingjing Yang et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)
Effect of Nb content on microstructure, property and in vitro apatite-forming capability of Ti-Nb alloys fabricated via selective laser melting
Qian Wang et al.
MATERIALS & DESIGN (2017)
Corrosion Behaviour of Selective Laser Melted Ti-TiB Biocomposite in Simulated Body Fluid
Yang Chen et al.
ELECTROCHIMICA ACTA (2017)
Corrosion of Ti6Al4V pins produced by direct metal laser sintering
J. J. de Damborenea et al.
APPLIED SURFACE SCIENCE (2017)
Corrosion behavior of selective laser melted Ti-6Al-4V alloy in NaCl solution
Nianwei Dai et al.
CORROSION SCIENCE (2016)
In situ elaboration of a binary Ti-26Nb alloy by selective laser melting of elemental titanium and niobium mixed powders
M. Fischer et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
Electrochemical and semiconducting properties of thin passive film formed on titanium in chloride medium at various pH conditions
Balakrishnan Munirathinam et al.
THIN SOLID FILMS (2016)
Effect of indium (In) on corrosion and passivity of a beta-type Ti-Nb alloy in Ringer's solution
Annett Gebert et al.
APPLIED SURFACE SCIENCE (2015)
Corrosion mechanism and evaluation of anodized magnesium alloys
Guang-Ling Song et al.
CORROSION SCIENCE (2014)
The intensification technologies to water electrolysis for hydrogen production - A review
Mingyong Wang et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2014)
Time dependence of growth and crystallization of anodic titanium oxide films in potentiostatic mode
Junheng Xing et al.
CORROSION SCIENCE (2013)
Differentiation of human mesenchymal stem cells on niobium-doped fluorapatite glass-ceramics
Meenakshi Kushwaha et al.
DENTAL MATERIALS (2012)
The history of the Point Defect Model for the passive state: A brief review of film growth aspects
Digby D. Macdonald
ELECTROCHIMICA ACTA (2011)
Comparative study on the corrosion behavior of Ti-Nb and TMA alloys for dental application in various artificial solutions
Y. J. Bai et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2011)
Effect of solution concentration on semiconducting properties of passive films formed on austenitic stainless steels
A. Fattah-alhosseini et al.
CORROSION SCIENCE (2010)
Determination of effective capacitance and film thickness from constant-phase-element parameters
Bryan Hirschorn et al.
ELECTROCHIMICA ACTA (2010)
Aqueous Long-Term Solubility of Titania Nanoparticles and Titanium(IV) Hydrolysis in a Sodium Chloride System Studied by Adsorptive Stripping Voltammetry
Jochen Schmidt et al.
JOURNAL OF SOLUTION CHEMISTRY (2009)
The electrochemical behaviour of Ti-13Nb-13Zr alloy in various solutions
S. L. Assis et al.
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2008)
Nanostructured niobium oxide coatings influence osteoblast adhesion
E. Eisenbarth et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2006)
Electrochemical behavior of metallic materials used in seawater -: interactions between glucose oxidase and passive layers
V L'Hostis et al.
ELECTROCHIMICA ACTA (2003)
Non-contact measurements of surface tension and viscosity of niobium, zirconium, and titanium using an electrostatic levitation furnace
PF Paradis et al.
INTERNATIONAL JOURNAL OF THERMOPHYSICS (2002)
Biocompatibility and osteogenesis of refractory metal implants, titanium, hafnium, niobium, tantalum and rhenium
H Matsuno et al.
BIOMATERIALS (2001)