Related references
Note: Only part of the references are listed.Fatigue crack growth in laser-treated adhesively bonded composite joints: An experimental examination
Idris Bello et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2021)
Effect of laser surface treatment on surface and bonding properties of carbon fiber reinforced composites
Lei Liu et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2020)
Shear strength of bonded joints of carbon fiber reinforced plastic (CFRP) laminates enhanced by a two-step laser surface treatment
Yingxi Xie et al.
COMPOSITE STRUCTURES (2020)
Evaluation of grit-blasting as a pre-treatment for carbon-fibre thermoplastic composite to aluminium bonded joints tested at static and dynamic loading rates
Karthik Ramaswamy et al.
COMPOSITES PART B-ENGINEERING (2020)
On controlling interfacial heterogeneity to trigger bridging in secondary bonded composite joints: An efficient strategy to introduce crack-arrest features
Ran Tao et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2020)
Investigation of the differences between photochemical and photothermal laser ablation on the shear strength of CFRP/CFRP adhesive joints
Erhan Akman et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2020)
Glass fiber-reinforced polymer nanocomposite adhesive joints reinforced with aligned carbon nanofillers
Reza Gholami et al.
COMPOSITE STRUCTURES (2020)
Strength and failure modes of surface treated CFRP secondary bonded single-lap joints in static and fatigue tensile loading regimes
Seong-Min Park et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)
Low pressure plasma treatment of CFRP substrates for adhesive bonding: an investigation of joint durability under severe temperature-moisture conditioning
M. Pizzorni et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2020)
On the effect of interfacial patterns on energy dissipation in plastically deforming adhesive bonded ductile sheets
Arturo Pascuzzo et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2020)
Enhancement of fracture toughness in secondary bonded CFRP using hybrid thermoplastic/thermoset bondline architecture
A. Yudhanto et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2020)
Mode I fracture characterisation of rigid and flexible bonded joints using an advanced Wedge-Driven Test
J. Manterola et al.
MECHANICS OF MATERIALS (2020)
Laser-based interfacial patterning enables toughening of CFRP/epoxy joints through bridging of adhesive ligaments
Ran Tao et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)
Toughening strategies in adhesive joints
Kevin Maloney et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2019)
The effects of plasma surface treatment on the mechanical properties of polycarbonate/carbon nanotube/carbon fiber composites
Beom-Gon Cho et al.
COMPOSITES PART B-ENGINEERING (2019)
The influence of surface treatment on the tensile properties of carbon fiber-reinforced epoxy composites-bonded joints
Guanxia Yang et al.
COMPOSITES PART B-ENGINEERING (2019)
Atmospheric plasma treatment of CFRP composites to enhance structural bonding investigated using surface analytical techniques
Chris Dighton et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2019)
Comparative study of infrared laser surface treatment and ultraviolet laser surface treatment of CFRP laminates
Yun Li et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Studies on the influence of surface treatment type, in the effectiveness of structural adhesive bonding, for carbon fiber reinforced composites
V. H. Martinez-Landeros et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Effect of infrared laser surface treatment on the morphology and adhesive properties of scarfed CFRP surfaces
Sergej Harder et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Investigation on energy director-less ultrasonic welding of polyetherimide (PEI)- to epoxy-based composites
Eirini Tsiangou et al.
COMPOSITES PART B-ENGINEERING (2019)
Review on techniques to improve the strength of adhesive joints with composite adherends
X. Shang et al.
COMPOSITES PART B-ENGINEERING (2019)
Effect of surface cold ablation on shear strength of CFRP adhesively bonded joint after UV laser treatment
Xiaohong Zhan et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2019)
In situ analysis of interfacial damage in adhesively bonded composite joints subjected to various surface pretreatments
Ran Tao et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Effectiveness of flame-based surface treatment for adhesive bonding of carbon fiber reinforced epoxy matrix composites
Tomo Takeda et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Comparative fractographic analysis of composites adhesive joints subjected to mode I delamination
Nubia N. A. Silveira et al.
POLYMER COMPOSITES (2019)
On the anisotropic behavior of electrodes for electrical-based monitoring of CFRP laminated composites
Khaled Almuhammadi et al.
POLYMER COMPOSITES (2019)
Effects of surface laser treatment on direct co-bonding strength of CFRP laminates
C. Leone et al.
COMPOSITE STRUCTURES (2018)
Laser-based surface patterning of composite plates for improved secondary adhesive bonding
Ran Tao et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
On the fracture behaviour of CFRP bonded joints under mode I loading: Effect of supporting carrier and interface contamination
Simon Heide-Jorgensen et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2018)
An investigation on effects of acid etching duration on adhesive bonding of polyethylene to E-glass/epoxy composites
R. Chitsaz Dehaghani et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2018)
The effect of laser ablation treatment on the chemistry, morphology and bonding strength of CFRP joints
Chengcheng Sun et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2018)
Single lap joints bonded with structural adhesives reinforced with a mixture of silica nanoparticles and multi walled carbon nanotubes
N. Razavi et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2018)
UV-laser cleaning and surface characterization of an aerospace carbon fibre reinforced polymer
B. Rauh et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2018)
Influence of femtosecond laser treated surfaces on the mode I fracture toughness of carbon-epoxy bonded joints
R. D. F. Moreira et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2018)
Effects of bondline discontinuity during growth of interface cracks including stability and kinetic considerations
Simon Heide-Jorgensen et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2018)
Effect of infrared laser surface treatment on the microstructure and properties of adhesively CFRP bonded joints
Xiaohong Zhan et al.
OPTICS AND LASER TECHNOLOGY (2018)
Mode II fracture toughness of carbon-epoxy bonded joints with femtosecond laser treated surfaces
R. D. F. Moreira et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)
Simultaneous enhancement of electrical conductivity and interlaminar fracture toughness of carbon fiber/epoxy composites using plasma-treated conductive thermoplastic film interleaves
Wei Li et al.
RSC ADVANCES (2018)
Towards a consensus on mode II adhesive fracture testing: Experimental study
M. Perez-Galmes et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2018)
Mechanical properties of adhesively single lap-bonded joints reinforced with multi-???walled carbon nanotubes and silica nanoparticles
M. R. Ayatollahi et al.
JOURNAL OF ADHESION (2017)
Debonding on command of multi-material adhesive joints
M. D. Banea et al.
JOURNAL OF ADHESION (2017)
Study on the effect of surface morphology on adhesion properties of polybenzimidazole adhesive bonded composite joints
H. M. S. Iqbal et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2017)
Surface treatment of CFRP composites using femtosecond laser radiation
V. Oliveira et al.
OPTICS AND LASERS IN ENGINEERING (2017)
Influence of cold plasma treatment parameters on the mechanical properties of polyamide homogeneous bonded joints
C. Mandolfino et al.
SURFACE & COATINGS TECHNOLOGY (2017)
Toughness amplification in copper/epoxy joints through pulsed laser micro-machined interface heterogeneities
Edwin Hernandez et al.
SCIENTIFIC REPORTS (2017)
Environmentally assisted crack growth in adhesively bonded composite joints
Jared Tracy et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
Joining of carbon fibre reinforced polymer (CFRP) composites and aluminium alloys - A review
A. Pramanik et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
Surface modification of carbon fiber for improving the interfacial adhesion between carbon fiber and polymer matrix
Hossein Rahmani et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2016)
Numerical simulation of combustion effects during laser processing of carbon fiber reinforced plastics
Tomomasa Ohkubo et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2016)
Effect of temperature on pure modes I and II fracture behavior of composite bonded joints
R. L. Fernandes et al.
COMPOSITES PART B-ENGINEERING (2016)
Structurally based constitutive model of epoxy adhesives incorporating the influence of post-curing and thermolysis
A. Mlyniec et al.
COMPOSITES PART B-ENGINEERING (2016)
Analysis of the removal of peel ply from CFRP surfaces
Christopher Buchmann et al.
COMPOSITES PART B-ENGINEERING (2016)
A hybrid bondline concept for bonded composite joints
T. Loebel et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2016)
Improving adhesion of copper/epoxy joints by pulsed laser ablation
Edwin Hernandez et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2016)
Laser ablation surface preparation for adhesive bonding of carbon fiber reinforced epoxy composites
Frank L. Palmieri et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2016)
Properties of Polymer Composites Used in High-Voltage Applications
Ilona Plesa et al.
POLYMERS (2016)
Laser-based surface preparation of composite laminates leads to improved electrodes for electrical measurements
Khaled Almuhammadi et al.
APPLIED SURFACE SCIENCE (2015)
Effects of mixed-mode ratio and step-shaped micro pattern surface on crack-propagation resistance of carbon-fiber-reinforced plastic/adhesive interface
Yoshikazu Yukimoto et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Thermoplastic-epoxy interactions and their potential applications in joining composite structures - A review
Shiqiang Deng et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Using silane-functionalized graphene oxides for enhancing the interfacial bonding strength of carbon/epoxy composites
Chang Yeong Lee et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Mode-I, mode-II and mixed-mode I plus II fracture behavior of composite bonded joints: Experimental characterization and numerical simulation
I. S. Floros et al.
COMPOSITES PART B-ENGINEERING (2015)
Chemical functionalization of composite surfaces for improved structural bonded repairs
Ines Joelly et al.
COMPOSITES PART B-ENGINEERING (2015)
Experimental and numerical study on the effect of humidity-temperature cycling on structural multi-material adhesive joints
Jakub Korta et al.
COMPOSITES PART B-ENGINEERING (2015)
Mixed-mode fracture toughness of co-cured and secondary bonded composite joints
J. Mohan et al.
ENGINEERING FRACTURE MECHANICS (2015)
Prediction of the macroscopic fracture toughness of a composite/adhesive interface with periodic surface microstructures
Takuya Suzuki et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2015)
Interface modification of glass fibre-polyester composite-composite joints using peel plies
M. Kanerva et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2015)
The effect of materials and surface preparation on joining methods: A review
Marcella D. Carnes et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2015)
Tailoring the Adhesion of Polymers using Plasma for Biomedical Applications: A Critical Review
Shaila Thakur et al.
REVIEWS OF ADHESION AND ADHESIVES (2015)
Cold plasma effect on short glass fibre reinforced composites adhesion properties
N. Encinas et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2014)
Surface modification of aircraft used composites for adhesive bonding
N. Encinas et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2014)
Air based atmospheric pressure plasma jet removal of FreKote 710-NC prior to composite-to-composite adhesive bonding
Victor J. Law et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2014)
Selected aspects of the effect of mechanical treatment on surface roughness and adhesive joint strength of steel sheets
Anna Rudawska
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2014)
Surface topography effect on strength of lap adhesive joints after mechanical pre-treatment
W. Zielecki et al.
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2013)
Crack growth analysis of a composite/adhesive interface toughened by in-mold surface preparation
Takuya Suzuki et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2013)
Crack growth rate and crack path in adhesively bonded joints: Comparison of creep, fatigue and fracture
G. Jhin et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2013)
Sensitivity of double cantilever beam test to surface contamination and surface pretreatment
M. Wetzel et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2013)
The peel ply surface treatment for adhesive bonding of composites: A review
M. Kanerva et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2013)
The Use of Peel Ply as a Method to Create Reproduceable But Contaminated Surfaces for Structural Adhesive Bonding of Carbon Fiber Reinforced Plastics
J. Holtmannspoetter et al.
JOURNAL OF ADHESION (2013)
Bonded repair of composite aircraft structures: A review of scientific challenges and opportunities
K. B. Katnam et al.
PROGRESS IN AEROSPACE SCIENCES (2013)
Analytical characterization of CFRP laser treated by excimer laser radiation
S. Kreling et al.
LASERS IN MANUFACTURING (LIM 2013) (2013)
Fracture toughness and shear behavior of composite bonded joints based on a novel aerospace adhesive
Ch V. Katsiropoulos et al.
COMPOSITES PART B-ENGINEERING (2012)
Reusing recycled fibers in high-value fiber-reinforced polymer composites: Improving bending strength by surface cleaning
Jian Shi et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2012)
Adhesion phenomena in bonded joints
A. Baldan
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2012)
Study on the role of laser surface irradiation on damage and decohesion of Al/epoxy joints
Marco Alfano et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2012)
Adhesive bonding of carbon fibre/epoxy laminates: Correlation between surface and mechanical properties
M. R. Gude et al.
SURFACE & COATINGS TECHNOLOGY (2012)
Specific adhesion of a soft elastic body on a wavy surface
Jizeng Wang et al.
THEORETICAL AND APPLIED MECHANICS LETTERS (2012)
Surface Structuring of CFRP by Using Modern Excimer Laser Sources
F. Fischer et al.
LASER ASSISTED NET SHAPE ENGINEERING 7 (LANE 2012) (2012)
Surface Preparation for Adhesive Bonding of Polycyanurate-Based Fiber-Reinforced Composites Using Atmospheric Plasma Treatment
R. J. Zaldivar et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2011)
Effect of manufacturing methods on the shear strength of composite single-lap bonded joints
Min-Gyu Song et al.
COMPOSITE STRUCTURES (2010)
Surface modification of high performance polymers by atmospheric pressure plasma and failure mechanism of adhesive bonded joints
H. M. S. Iqbal et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2010)
Surface Pretreatments for Composite Joints: Study of Surface Profile by SEM Image Analysis
S. G. Prolongo et al.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2010)
The Effect of Atmospheric Plasma Treatment on the Chemistry, Morphology and Resultant Bonding Behavior of a Pan-Based Carbon Fiber-Reinforced Epoxy Composite
R. J. Zaldivar et al.
JOURNAL OF COMPOSITE MATERIALS (2010)
Effect of Processing Parameter Changes on the Adhesion of Plasma-treated Carbon Fiber Reinforced Epoxy Composites
R. J. Zaldivar et al.
JOURNAL OF COMPOSITE MATERIALS (2010)
Integrated cost/weight optimization of aircraft structures
Markus Kaufmann et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2010)
Micrographic studies on adhesively bonded scarf repairs to thick composite aircraft structure
B. Whittingham et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)
The relative merits of the Boeing wedge test and the double cantilever beam test for assessing the durability of adhesively bonded joints, with particular reference to the use of fracture mechanics
R. D. Adams et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2009)
Pure mode II fracture characterization of composite bonded joints
M. F. S. F. de Moura et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2009)
An introduction to the special issue on peel testing
D. R. Moore
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2008)
Polymer surface modification for the attachment of bioactive compounds
J. M. Goddard et al.
PROGRESS IN POLYMER SCIENCE (2007)
Failure prevention in bonded joints on primary load bearing structures
Gary Savage
ENGINEERING FAILURE ANALYSIS (2007)
Surface treatment of carbon/epoxy and glass/epoxy composites with an excimer laser beam
Q. Bénard et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2006)
Effect of grit-blasting on the surface energy of graphite/epoxy composites
FJ Boerio et al.
JOURNAL OF ADHESION (2006)
Carbon fiber reinforced plastics in aircraft construction
C Soutis
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Evaluation of fiber surface treatment and toughening of thermoset matrix on the interfacial behaviour of carbon fiber-reinforced cyanate matrix composites
C Marieta et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2005)
Influence of fibre reinforcement and peel ply surface treatment towards adhesion of composite surfaces
Q Bénard et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2005)
Peel ply surface treatment for composite assemblies: Chemistry and morphology effects
Q Benard et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2005)
Adhesively-bonded joints and repairs in metallic alloys, polymers and composite materials: Adhesives, adhesion theories and surface pretreatment
A Baldan
JOURNAL OF MATERIALS SCIENCE (2004)
Warm water treatment of aluminum for adhesive bonding
PR Underhill et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2003)
Surface energy, surface topography and adhesion
DE Packham
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2003)
Investigation of optimal surface treatments for carbon/epoxy composite adhesive joints
JK Kim et al.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2003)
Surface treatment of titanium for adhesive bonding to polymer composites: a review
P Molitor et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2001)
Adhesive bonding of aircraft structures
A Higgins
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2000)
Mixed mode failure criteria for a glass/epoxy composite and an adhesively bonded composite/composite joint
F Ducept et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2000)
Share Paper
