Related references
Note: Only part of the references are listed.Mitigating forming defects by local modification of dry preforms
Mark A. Turk et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)
Characterization and finite element modeling of coupled properties during polymer composites forming processes
Hassan Alshahrani
MECHANICS OF MATERIALS (2020)
A novel methodology to construct periodic multi-layer 2D woven unit cells with random nesting configurations directly from μCT-scans
W. Wijaya et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2020)
Modelling defect formation in textiles during the double diaphragm forming process
Adam J. Thompson et al.
COMPOSITES PART B-ENGINEERING (2020)
Induction melt thermoforming of advanced multi-axial thermoplastic composite laminates
P. Harrison et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Evaluating the potential of forming spot-welded layups out of fibre reinforced thermoplastic tape without previous consolidation
Alexander Schug et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2019)
Experimental characterization and analysis of fiber orientations in hemispherical thermostamping for unidirectional thermoplastic composites
Kai Liu et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2019)
Fast processing and continuous simulation of automotive structural composite components
Frank Henning et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2019)
Textile composite structural analysis taking into account the forming process
Abderrahmen Aridhi et al.
COMPOSITES PART B-ENGINEERING (2019)
Consolidation Modeling during Thermoforming of Thermoplastic Composite Prepregs
Hu Xiong et al.
MATERIALS (2019)
Experimental and numerical analysis of wrinkling during forming of multilayered textile composites
E. Guzman-Maldonado et al.
COMPOSITE STRUCTURES (2019)
Influence of tension-shear coupling on draping of plain weave fabrics
Yuan Yao et al.
JOURNAL OF MATERIALS SCIENCE (2019)
Identifying the distinct shear wrinkling behavior of woven composite preforms under bias extension and picture frame tests
A. Hosseini et al.
COMPOSITE STRUCTURES (2018)
Passive control of wrinkles in woven fabric preforms using a geometrical modification of blank holders
A. Rashidi et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Analysis of the 3D draping behavior of carbon fiber non-crimp fabrics with eddy current technique
Georg Bardl et al.
COMPOSITES PART B-ENGINEERING (2018)
Bending and wrinkling of composite fiber preforms and prepregs. A review and new developments in the draping simulations
P. Boisse et al.
COMPOSITES PART B-ENGINEERING (2018)
Consolidation-Driven Defect Generation in Thick Composite Parts
J. P. -H. Belnoue et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2018)
Metal flow control during hot forming of square cups with local-thickened plates and varied friction conditions
Xinyun Wang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Experimental and Numerical Studies on Fiber Deformation and Formability in Thermoforming Process Using a Fast-Cure Carbon Prepreg: Effect of Stacking Sequence and Mold Geometry
Daeryeong Bae et al.
MATERIALS (2018)
Resin infusion-based processes simulation : coupled Stokes-Darcy flows in orthotropic preforms undergoing finite strain
Maxime Blais et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2017)
Experimental comparison of a macroscopic draping simulation for dry non-crimp fabric preforming on a complex geometry by means of optical measurement
Annegret Mallach et al.
JOURNAL OF COMPOSITE MATERIALS (2017)
The bias-extension test for the analysis of in-plane shear properties of textile composite reinforcements and prepregs: a review
P. Boisse et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2017)
Experimental and numerical investigations on formability of out-of-autoclave thermoset prepreg using a double diaphragm process
Hassan Alshahrani et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
Viscoelastic bending model for continuous fiber-reinforced thermoplastic composites in melt
U. Sachs et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
A theoretical model with experimental verification for bending stiffness of thermosetting prepreg during forming process
Hassan Alshahrani et al.
COMPOSITE STRUCTURES (2017)
A viscoelastic approach for modeling bending behavior in finite element forming simulation of continuously fiber reinforced composites
Dominik Doerr et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
A parametric sensitivity study on preforming simulations of woven composites using a hypoelastic computational model
Muhammad A. Khan et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2016)
Investigation into the changes in bending stiffness of a textile reinforced composite due to in-plane fabric shear: Part 2-Numerical analysis
Cynthia Mitchell et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Processing of thermoset prepregs for high-volume applications and their numerical analysis using superimposed finite elements
M. A. Khan et al.
COMPOSITE STRUCTURES (2015)
Thermomechanical analysis, modelling and simulation of the forming of pre-impregnated thermoplastics composites
E. Guzman-Maldonado et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Predictive model for the detection of out-of-plane defects formed during textile-composite manufacture
Lisa M. Dangora et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Influence of the tufting yarns on formability of tufted 3-Dimensional composite reinforcement
LingShan Liu et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Formability optimisation of fabric preforms by controlling material draw-in through in-plane constraints
S. Chen et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Numerical modelling of forming of a non-crimp 3D orthogonal weave E-glass composite reinforcement
Juan Pazmino et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Experimental and numerical analyses of manufacturing process of a composite square box part: Comparison between textile reinforcement forming and surface 3D weaving
Peng Wang et al.
COMPOSITES PART B-ENGINEERING (2015)
Enhanced modeling of 3D composite preform deformations taking into account local fiber bending stiffness
S. Mathieu et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2015)
Characterisation of the shear-tension coupling of carbon-fibre fabric under controlled membrane tensions for precise simulative predictions of industrial preforming processes
Farbod Nosrat-Nezami et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)
Formability of a non-crimp 3D orthogonal weave E-glass composite reinforcement
Juan Pazmino et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)
Formability analyses of uni-directional and textile reinforced thermoplastics
S. P. Haanappel et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)
Experimental preforming of highly double curved shapes with a case corner using an interlock reinforcement
S. Allaoui et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2014)
Press forming a 0/90 cross-ply advanced thermoplastic composite using the double-dome benchmark geometry
P. Harrison et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2013)
An experimental study of mechanisms behind wrinkle development during forming of composite laminates
P. Hallander et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2013)
Beyond plain weave fabrics - I. Geometrical model
Adi Adumitroaie et al.
COMPOSITE STRUCTURES (2011)
The internal structure and conformation of prepreg with respect to reliable automated processing
D. H. -J. A. Lukaszewicz et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)
Modelling approach for the prediction of stitch influence during woven fabric draping
M. Duhoyic et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)
Experimental and numerical analyses of textile reinforcement forming of a tetrahedral shape
S. Allaoui et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)
Modeling of high speed RTM injection with highly reactive resin with on-line mixing
M. Deleglise et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)
Validation of a non-orthogonal constitutive model for woven composite fabrics via hemispherical stamping simulation
Xiongqi Peng et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)
Modeling and simulation of voids and saturation in liquid composite molding processes
Chung Hae Park et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)
Towards the 3D in situ characterisation of deformation micro-mechanisms within a compressed bundle of fibres
P. Latil et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2011)
Textile composite double dome stamping simulation using a non-orthogonal constitutive model
Xiongqi Peng et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2011)
Simulation of wrinkling during textile composite reinforcement forming. Influence of tensile, in-plane shear and bending stiffnesses
P. Boisse et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2011)
Experimental Study of Bending Behaviour of Reinforcements
E. de Bilbao et al.
EXPERIMENTAL MECHANICS (2010)
Numerical and experimental analyses of woven composite reinforcement forming using a hypoelastic behaviour. Application to the double dome benchmark
M. A. Khan et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2010)
Experimental measurement and predictive modelling of bending behaviour for viscous unidirectional composite materials
Jinhuo Wang et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2010)
A multi-layer triangular membrane finite element for the forming simulation of laminated composites
R. H. W. ten Thije et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)
A semi-discrete shell finite element for textile composite reinforcement forming simulation
N. Hamila et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2009)
Theoretical Modeling of Large Shear Deformation and Wrinkling of Plain Woven Composite
B. Zhu et al.
JOURNAL OF COMPOSITE MATERIALS (2009)
NUMERICAL SIMULATIONS ON DOUBLE-DOME FORMING OF WOVEN COMPOSITES USING THE COUPLED NON-ORTHOGONAL CONSTITUTIVE MODEL
Wonoh Lee et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2009)
Characterization of mechanical behavior of woven fabrics: Experimental methods and benchmark results
J. Cao et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)
Optical strain fields in shear and tensile testing of textile reinforcements
A. Willems et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2008)
Experimental analysis of the influence of tensions on in plane shear behaviour of woven composite reinforcements
Jean Launay et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2008)
Mechanical modelling of monofilament technical textiles
Valter Carvelli et al.
COMPUTATIONAL MATERIALS SCIENCE (2008)
Predictive modelling for optimization of textile composite forming
H. Lin et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2007)
A simplified rate dependent model of forming and wrinkling of pre-impregnated woven composites
A. A. Skordos et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
Model of shear of woven fabric and parametric description of shear resistance of glass woven reinforcements
SV Lomov et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2006)
A woven reinforcement forming simulation method. Influence of the shear stiffness
B Zouari et al.
COMPUTERS & STRUCTURES (2006)
Manufacturing cost comparison of thermoplastic and thermoset RTM for an automotive floor pan
J Verrey et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)
Finite element forming simulation for non-crimp fabrics using a non-orthogonal constitutive equation
WR Yu et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2005)
Evaluation of bias-extension and picture-frame test methods for the measurement of intraply shear properties of PP/glass commingled fabrics
G Lebrun et al.
COMPOSITE STRUCTURES (2003)
An approach in modeling the temperature effect in thermo-stamping of woven composites
J Cao et al.
COMPOSITE STRUCTURES (2003)
Characterisation of material properties for draping of dry woven composite material
SB Sharma et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2003)
Experimental analysis and modeling of biaxial mechanical behavior of woven composite reinforcements
K Buet-Gautier et al.
EXPERIMENTAL MECHANICS (2001)
Drapability of dry textile fabrics for stampable thermoplastic preforms
O Rozant et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2000)
Share Paper
