Related references
Note: Only part of the references are listed.3D printing of PEEK-cHAp scaffold for medical bone implant
Bankole I. Oladapo et al.
BIO-DESIGN AND MANUFACTURING (2021)
3D printing of surface characterisation and finite element analysis improvement of PEEK-HAP-GO in bone implant
Bankole I. Oladapo et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Mechanical and biological properties of chitin/polylactide (PLA)/hydroxyapatite (HAP) composites cast using ionic liquid solutions
Jayashree Chakravarty et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)
Graphene oxide-driven interfacial coupling in laser 3D printed PEEK/PVA scaffolds for bone regeneration
Pei Feng et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2020)
Heparan sulfate loaded polycaprolactone-hydroxyapatite scaffolds with 3D printing for bone defect repair
Yi Liu et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)
Nanocomposite chitosan film containing graphene oxide/hydroxyapatite/gold for bone tissue engineering
J. Prakash et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)
Development of Satureja cuneifolia-loaded sodium alginate/polyethylene glycol scaffolds produced by 3D-printing technology as a diabetic wound dressing material
Elif Ilhan et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)
Lattice design and 3D-printing of PEEK with Ca10(OH)(PO4)3 and in-vitro bio-composite for bone implant
Bankole Oladapo et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)
Analytical modelling of in situ layer-wise defect detection in 3D-printed parts: additive manufacturing
Oluwole K. Bowoto et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
3D-poly (lactic acid) scaffolds coated with gelatin and mucic acid for bone tissue engineering
B. Ashwin et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)
3D printing of modified soybean hull fiber/polymer composites
Vamsi Krishna Balla et al.
MATERIALS CHEMISTRY AND PHYSICS (2020)
3D printing of bone scaffolds with hybrid biomaterials
Bankole I. Oladapo et al.
COMPOSITES PART B-ENGINEERING (2019)
Evaluating the bioactivity of a hydroxyapatite-incorporated polyetheretherketone biocomposite
Rui Ma et al.
JOURNAL OF ORTHOPAEDIC SURGERY AND RESEARCH (2019)
3D printing of polyether-ether-ketone for biomedical applications
Sunpreet Singh et al.
EUROPEAN POLYMER JOURNAL (2019)
Multi-scale mapping for collagen-regulated mineralization in bone remodeling of additive manufacturing porous implants
Pei-I. Tsai et al.
MATERIALS CHEMISTRY AND PHYSICS (2019)
Process development of fabricating ceramic core using 3D printing technique
Hye-Yeong Park et al.
MATERIALS CHEMISTRY AND PHYSICS (2019)
Influence of chitosan on the antibacterial activity of composite coating (PEEK /HAp) fabricated by electrophoretic deposition
Makarim H. Abdulkareem et al.
PROGRESS IN ORGANIC COATINGS (2019)
Microstructural evaluation of aluminium alloy A365 T6 in machining operation
Banizole Oladapo et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)
Extrusion-based 3D printing of photo-crosslinkable gelatin and κ-carrageenan hydrogel blends for adipose tissue regeneration
Liesbeth Tytgat et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2019)
Hydroxyapatite Nanoparticle Coating on Polymer for Constructing Effective Biointeractive Interfaces
Tania Guadalupe Penaflor Galindo et al.
JOURNAL OF NANOMATERIALS (2019)
Numerical predictions of U-notched sample failure based on a discrete energy argument
S. A. Zahedi et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2019)
Model design of a superconducting quantum interference device of magnetic field sensors for magnetocardiography
Bankole Oladapo et al.
BIOMEDICAL SIGNAL PROCESSING AND CONTROL (2018)
Electrophoretic co-deposition of PEEK-hydroxyapatite composite coatings for biomedical applications
Fatih E. Bastan et al.
COLLOIDS AND SURFACES B-BIOINTERFACES (2018)
Analytical optimization of a nanoparticle of microstructural fused deposition of resins for additive manufacturing
Bankole I. Oladapo et al.
COMPOSITES PART B-ENGINEERING (2018)
Flexural fatigue behavior of plasma-sprayed hydroxyapatite-coated polyether-ether-ketone (PEEK) injection moldings derived from dynamic mechanical analysis
T. P. Oliveira et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Research into the mechanical properties, sintering mechanism and microstructure evolution of Al2O3-ZO(2) composites fabricated by a stereolithography-based 3D printing method
Ziwei Wu et al.
MATERIALS CHEMISTRY AND PHYSICS (2018)
Improvement of dispersion stability and 3D-printing characteristics of ceramics in photopolymers by controlling the coating thickness of silane coupling agents
Se Yeon Song et al.
MATERIALS CHEMISTRY AND PHYSICS (2018)
Microwave assisted coating of bioactive amorphous magnesium phosphate (AMP) on polyetheretherketone (PEEK)
Yufu Ren et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2018)
Developments of nano-TiO2 incorporated hydroxyapatite/PEEK composite strut for cervical reconstruction and interbody fusion after corpectomy with anterior plate fixation
Fanlei Kong et al.
JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY B-BIOLOGY (2018)
Image-guided installation of 3D-printed patient-specific implant and its application in pelvic tumor resection and reconstruction surgery
Xiaojun Chen et al.
COMPUTER METHODS AND PROGRAMS IN BIOMEDICINE (2016)
Improving PEEK bioactivity for craniofacial reconstruction using a 3D printed scaffold embedded with mesenchymal stem cells
Michael Roskies et al.
JOURNAL OF BIOMATERIALS APPLICATIONS (2016)
Hydroxyapatite coating on PEEK implants: Biomechanical and histological study in a rabbit model
John W. Durham et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
Characterization of New PEEK/HA Composites with 3D HA Network Fabricated by Extrusion Freeforming
Mohammad Vaezi et al.
MOLECULES (2016)
Characterization of titanium nitride-hydroxyapatite on PEEK for dental implants by co-axis target magnetron sputtering
Dheerawan Boonyawan et al.
SURFACE & COATINGS TECHNOLOGY (2016)
Influence of the processing temperature on the tribological and mechanical properties of poly-ether-ether-ketone (PEEK) polymer
M. Zalaznik et al.
TRIBOLOGY INTERNATIONAL (2016)
Applications of polyetheretherketone (PEEK) in oral implantology and prosthodontics
Shariq Najeeb et al.
JOURNAL OF PROSTHODONTIC RESEARCH (2016)
Mechanical Properties of Plasma Immersion Ion Implanted PEEK for Bioactivation of Medical Devices
Edgar A. Wakelin et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Low temperature effect on impact energy absorption capability of PEEK composites
D. Garcia-Gonzalez et al.
COMPOSITE STRUCTURES (2015)
Three-unit reinforced polyetheretherketone composite FDPs: Influence of fabrication method on load-bearing capacity and failure types
Bogna Stawarczyk et al.
DENTAL MATERIALS JOURNAL (2015)
Advances in Nanotechnology for Restorative Dentistry
Zohaib Khurshid et al.
MATERIALS (2015)
Nanomodified Peek Dental Implants: Bioactive Composites and Surface Modification-A Review
Shariq Najeeb et al.
INTERNATIONAL JOURNAL OF DENTISTRY (2015)
Crystalline ha coating on peek via chemical deposition
D. Almasi et al.
APPLIED SURFACE SCIENCE (2014)
The effect of different surface treatments on the bond strength of PEEK composite materials
Li Zhou et al.
DENTAL MATERIALS (2014)
Differentiation of human mesenchymal stem cells on plasma-treated polyetheretherketone
Jasmin Waser-Althaus et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2014)
Air DBD plasma treatment on three-dimensional braided carbon fiber-reinforced PEEK composites for enhancement of in vitro bioactivity
Honglin Luo et al.
SURFACE & COATINGS TECHNOLOGY (2014)
FE/SPH modelling of orthogonal micro-machining of f.c.c. single crystal
S. Abolfazl Zahedi et al.
COMPUTATIONAL MATERIALS SCIENCE (2013)
The improvement of adhesive properties of PEEK through different pre-treatments
Lubica Hallmann et al.
APPLIED SURFACE SCIENCE (2012)
Hybrid effect of nanoparticles with carbon fibers on the mechanical and wear properties of polymer composites
Guo-ming Lin et al.
COMPOSITES PART B-ENGINEERING (2012)
Hydroxyapatite whisker-reinforced polyetherketoneketone bone ingrowth scaffolds
Gabriel L. Converse et al.
ACTA BIOMATERIALIA (2010)
The electron beam deposition of titanium on polyetheretherketone (PEEK) and the resulting enhanced biological properties
Cheol-Min Han et al.
BIOMATERIALS (2010)
Effect of carbon nanotubes on the mechanical properties and crystallization behavior of poly(ether ether ketone)
Changru Rong et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2010)
Experimental Investigation into the Effect of Adhesion Properties of PEEK Modified by Atmospheric Pressure Plasma and Low Pressure Plasma
Sangeeta Jha et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2010)
Evaluation of the stress distribution in CFR-PEEK dental implants by the three-dimensional finite element method
Joao Rodrigo Sarot et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2010)
Mechanical properties and microstructure of polyetheretherketone-hydroxyapatite nanocomposite materials
Lin Wang et al.
MATERIALS LETTERS (2010)
A correlation between the tribological and mechanical properties of short carbon fibers reinforced PEEK materials with different fiber orientations
Z. Rasheva et al.
TRIBOLOGY INTERNATIONAL (2010)
Mechanical properties and in vitro response of strontium-containing hydroxyapatite/polyetheretherketone composites
K. L. Wong et al.
BIOMATERIALS (2009)
Notch sensitivity of PEEK in monotonic tension
Michael C. Sobieraj et al.
BIOMATERIALS (2009)
The influence of a compatibilizer on the thermal and dynamic mechanical properties of PEEK/carbon nanotube composites
A. M. Diez-Pascual et al.
NANOTECHNOLOGY (2009)
Microstructure and mechanical properties of flame-sprayed PEEK coating remelted by laser process
Chao Zhang et al.
PROGRESS IN ORGANIC COATINGS (2009)
Additive fabrication technologies applied to medicine and health care: a review
J. Giannatsis et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2009)
Microstructures and tribological properties of PEEK-based nanocomposite coatings incorporating inorganic fullerene-like nanoparticles
Xianghui Hou et al.
SURFACE & COATINGS TECHNOLOGY (2008)
PEEK biomaterials in trauma, orthopedic, and spinal implants
Steven M. Kurtz et al.
BIOMATERIALS (2007)
Dynamic mechanical properties of Al2O3/poly(ether ether ketone) composites
R. K. Goyal et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2007)
The influence of sterilization processes on the micromechanical properties of carbon fiber-reinforced PEEK composites for bone implant applications
A. Godara et al.
ACTA BIOMATERIALIA (2007)
Polyetheretherketone as a biomaterial for spinal applications
JM Toth et al.
BIOMATERIALS (2006)
Effect of beta TCP filled polyetheretherketone on osteoblast cell proliferation in vitro
L Petrovic et al.
JOURNAL OF BIOMEDICAL SCIENCE (2006)
Response of primary fibroblasts and osteoblasts to plasma treated polyetheretherketone (PEEK) surfaces
D Briem et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2005)
In vitro apatite formation and its growth kinetics on hydroxyapatite/polyetheretherketone biocomposites
SC Yu et al.
BIOMATERIALS (2005)
Influence of PTFE content in PEEK-PTFE blends on mechanical properties and tribo-performance in various wear modes
J Bijwe et al.
WEAR (2005)
Synthesis and characterization of sulfonated poly(ether ether ketone) for proton exchange membranes
PX Xing et al.
JOURNAL OF MEMBRANE SCIENCE (2004)
Tensile properties, tension-tension fatigue and biological response of polyetheretherketone-hydroxyapatite composites for load-bearing orthopedic implants
MS Abu Bakar et al.
BIOMATERIALS (2003)