Related references
Note: Only part of the references are listed.Comparison of marginal and internal fit of 3-unit zirconia frameworks fabricated with CAD-CAM technology using direct and indirect digital scans
Ali Arezoobakhsh et al.
JOURNAL OF PROSTHETIC DENTISTRY (2020)
Effects of precementation on minimizing residual cement around the marginal area of dental implants
Wei Wang et al.
JOURNAL OF PROSTHETIC DENTISTRY (2020)
Effect of porcelain firing and cementation on the marginal fit of implant-supported metal-ceramic restorations fabricated by additive or subtractive manufacturing methods
Bengisu Yildirim
JOURNAL OF PROSTHETIC DENTISTRY (2020)
Marginal and internal fit of three-unit zirconia fixed dental prostheses: Effects of prosthesis design, cement space, and zirconia type
Shohei Suzuki et al.
JOURNAL OF PROSTHODONTIC RESEARCH (2020)
The use of PEEK in digital prosthodontics: A narrative review
Ioannis Papathanasiou et al.
BMC ORAL HEALTH (2020)
Evaluation of marginal discrepancy in metal frameworks fabricated by sintering-based computer-aided manufacturing methods
Necati Kaleli et al.
JOURNAL OF ADVANCED PROSTHODONTICS (2020)
Marginal fit of metal-ceramic crowns fabricated by using a casting and two selective laser melting processes before and after ceramic firing
Min-Ho Hong et al.
JOURNAL OF PROSTHETIC DENTISTRY (2019)
A Comparison Study of Marginal and Internal Fit Assessment Methods for Fixed Dental Prostheses
Keunbada Son et al.
JOURNAL OF CLINICAL MEDICINE (2019)
In vitro marginal and internal adaptation of metal-ceramic crowns with cobalt-chrome and titanium framework fabricated with CAD/CAM and casting technique
K. Gurel et al.
NIGERIAN JOURNAL OF CLINICAL PRACTICE (2019)
CAD/CAM Ceramic Restorative Materials for Natural Teeth
F. A. Spitznagel et al.
JOURNAL OF DENTAL RESEARCH (2018)
Marginal and internal fit of pre-sintered Co-Cr and zirconia 3-unit fixed dental prostheses as measured using microcomputed tomography
Elie E. Daou et al.
JOURNAL OF PROSTHETIC DENTISTRY (2018)
Effect of manufacturing techniques on the marginal and internal fit of cobalt-chromium implant-supported multiunit frameworks
Elif Tuba Akcin et al.
JOURNAL OF PROSTHETIC DENTISTRY (2018)
Evaluation of marginal fit of single implant-supported metal-ceramic crowns prepared by using presintered metal blocks
Baris Pasali et al.
JOURNAL OF PROSTHETIC DENTISTRY (2018)
A microcomputed tomography evaluation of the marginal fit of cobalt-chromium alloy copings fabricated by new manufacturing techniques and alloy systems
Eun-Ha Kim et al.
JOURNAL OF PROSTHETIC DENTISTRY (2017)
Internal fit of single crowns produced by CAD-CAM and lost-wax metal casting technique assessed by the triple-scan protocol
Bjorn Einar Dahl et al.
JOURNAL OF PROSTHETIC DENTISTRY (2017)
Three-dimensional analysis of marginal and internal fit of copings fabricated with polyetherketoneketone (PEKK) and zirconia
So-Yeon Bae et al.
JOURNAL OF PROSTHODONTIC RESEARCH (2017)
Monolithic zirconia dental crowns. Internal fit, margin quality, fracture mode and load at fracture
Christian Schriwer et al.
DENTAL MATERIALS (2017)
Fit of 4-unit FDPs from CoCr and zirconia after conventional and digital impressions
Kazuhiko Ueda et al.
CLINICAL ORAL INVESTIGATIONS (2016)
Influence of Tooth Preparation Design on Fitting Accuracy of CAD-CAM Based Restorations
Sabit Melih Ates et al.
Journal of Esthetic and Restorative Dentistry (2016)
Evaluation of the fit of metal ceramic restorations fabricated with a pre-sintered soft alloy
Jong-Kyoung Park et al.
JOURNAL OF PROSTHETIC DENTISTRY (2016)
In vitro assessment of the marginal and internal fits of interim implant restorations fabricated with different methods
Jin-Young Park et al.
JOURNAL OF PROSTHETIC DENTISTRY (2016)
Applications of polyetheretherketone (PEEK) in oral implantology and prosthodontics
Shariq Najeeb et al.
JOURNAL OF PROSTHODONTIC RESEARCH (2016)
Internal and marginal fit of cobalt-chromium fixed dental prostheses fabricated with 3 different techniques
Harald Nesse et al.
JOURNAL OF PROSTHETIC DENTISTRY (2015)
Influence of CAD/CAM on the fit accuracy of implant-supported zirconia and cobalt-chromium fixed dental prostheses
Danilo Gonzaga et al.
JOURNAL OF PROSTHETIC DENTISTRY (2015)
Comparison of Conventional Methods and Laser-Assisted Rapid Prototyping for Manufacturing Fixed Dental Prostheses: An In Vitro Study
Giorgio Pompa et al.
BIOMED RESEARCH INTERNATIONAL (2015)
“Additive Manufacturing Technologies: 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing”, 2nd Edition
Jonathan Edgar et al.
Johnson Matthey Technology Review (2015)
Marginal and internal fit of four-unit zirconia fixed dental prostheses based on digital and conventional impression techniques
Junio S. Almeida e Silva et al.
CLINICAL ORAL INVESTIGATIONS (2014)
Fit of 4-unit FDPs made of zirconia and CoCr-alloy after chairside and labside digitalization - A laboratory study
Christine Keul et al.
DENTAL MATERIALS (2014)
CLINICAL MARGINAL AND INTERNAL ADAPTATION OF CAD/CAM MILLING, LASER SINTERING, AND CAST METAL CERAMIC CROWNS
Ece Tamac et al.
JOURNAL OF PROSTHETIC DENTISTRY (2014)
Ceramic dental biomaterials and CAD/CAM technology: State of the art
Raymond Wai Kim Li et al.
JOURNAL OF PROSTHODONTIC RESEARCH (2014)
Evaluation of marginal and internal fit of ceramic crown copings
Juliana Tereza Colpani et al.
DENTAL MATERIALS (2013)
Three-Dimensional Accuracy of CAD/CAM Titanium and Ceramic Superstructures for Implant Abutments Using Spiral Scan Microtomography
Rahul Prasad et al.
INTERNATIONAL JOURNAL OF PROSTHODONTICS (2013)
Polyetheretherketone-A suitable material for fixed dental prostheses?
Bogna Stawarczyk et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2013)
Accuracy and Reliability of Methods to Measure Marginal Adaptation of Crowns and FDPs: A Literature Review
Noor A. Nawafleh et al.
JOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY (2013)
A Comparison of Fit of CNC-Milled Titanium and Zirconia Frameworks to Implants
Jaafar Abduo et al.
CLINICAL IMPLANT DENTISTRY AND RELATED RESEARCH (2012)
The Application of Rapid Prototyping in Prosthodontics
Jian Sun et al.
JOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY (2012)
The fit of cobalt-chromium three-unit fixed dental prostheses fabricated with four different techniques: A comparative in vitro study
Anders Ortorp et al.
DENTAL MATERIALS (2011)
MARGINAL ADAPTATION OF THREE DIFFERENT ZIRCONIUM DIOXIDE THREE-UNIT FIXED DENTAL PROSTHESES
Wael Att et al.
JOURNAL OF PROSTHETIC DENTISTRY (2009)
INTERNAL FIT EVALUATION OF CROWNS PREPARED USING A NEW DENTAL CROWN FABRICATION TECHNIQUE: LASER-SINTERED CO-CR CROWNS
Yurdanur Ucar et al.
JOURNAL OF PROSTHETIC DENTISTRY (2009)
Marginal and internal fit of metal-ceramic crowns fabricated with a new laser melting technology
Katrin Quante et al.
DENTAL MATERIALS (2008)
Marginal and internal adaptation of zirconium dioxide ceramic copings and crowns with different finish line designs
Futoshi Komine et al.
DENTAL MATERIALS JOURNAL (2007)
Computer-aided design and fabrication of dental restorations - Current systems and future possibilities
Joerg R. Strub et al.
JOURNAL OF THE AMERICAN DENTAL ASSOCIATION (2006)
Marginal accuracy of titanium copings fabricated by casting and CAD/CAM techniques
Siegbert Witkowski et al.
JOURNAL OF PROSTHETIC DENTISTRY (2006)
Rapid prototyping in dentistry: technology and application
Qingbin Liu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2006)
Clinical marginal and internal gaps of Procera AllCeram crowns
Y Kokubo et al.
JOURNAL OF ORAL REHABILITATION (2005)
The apparent increase of the Young's modulus in thin cement layers
N De Jager et al.
DENTAL MATERIALS (2004)
Share Paper
