Related references
Note: Only part of the references are listed.An improved CFD modeling approach applied for the simulation of gas-liquid interaction in the ozone contactor along with structure optimization
Xiangyu Chen et al.
CHEMICAL ENGINEERING JOURNAL (2020)
Analysis of the turbulent flow and trailing vortices induced by new design grooved blade impellers in a baffled tank
Sergio A. Martinez-Delgadillo et al.
CHEMICAL ENGINEERING JOURNAL (2019)
Multi-objective optimization of corrugated tube with loose-fit twisted tape using RSM and NSGA-II
Huaizhi Han et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)
3-D CFD-PBM coupled modeling and experimental investigation of struvite precipitation in a batch stirred reactor
Seyyed Ebrahim Mousavi et al.
CHEMICAL ENGINEERING JOURNAL (2019)
Surface vortex formation and free surface deformation in an unbaffled vessel stirred by on-axis and eccentric impellers
Takuya Yamamoto et al.
CHEMICAL ENGINEERING JOURNAL (2019)
A 3D SPH-FE coupling for FSI problems and its application to tire hydroplaning simulations on rough ground
C. Hermange et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2019)
Analysis and assessment of a monolithic FSI finite element method
Alexander Lozovskiy et al.
COMPUTERS & FLUIDS (2019)
Identifying dominant spatial and time characteristics of flow dynamics within free-surface baffled stirred-tanks from CFD simulations
Anne de Lamotte et al.
CHEMICAL ENGINEERING SCIENCE (2018)
Numerical evaluation of turbulent flow structures in a stirred tank with a Rushton turbine based on scale-adaptive simulation
Ali Zamiri et al.
COMPUTERS & FLUIDS (2018)
Comparative studies on using RSM and TOPSIS methods to optimize residential air conditioning systems
Ning Mao et al.
ENERGY (2018)
Improving the accuracy of CFD predictions of turbulence in a tank stirred by a hydrofoil impeller
Graeme L. Lane
CHEMICAL ENGINEERING SCIENCE (2017)
Fluid-structure interaction analysis of NREL phase VI wind turbine: Aerodynamic force evaluation and structural analysis using FSI analysis
Kyoungsoo Lee et al.
RENEWABLE ENERGY (2017)
Optimization investigation on configuration parameters of spiral-wound heat exchanger using Genetic Aggregation response surface and Multi-Objective Genetic Algorithm
Simin Wang et al.
APPLIED THERMAL ENGINEERING (2017)
Multi-objective optimization of microchannel reactor for Fischer-Tropsch synthesis using computational fluid dynamics and genetic algorithm
Jonggeol Na et al.
CHEMICAL ENGINEERING JOURNAL (2017)
Micro-mixing in chemical reactors: A perspective
Zaisha Mao et al.
CHINESE JOURNAL OF CHEMICAL ENGINEERING (2017)
Shear improved Smagorinsky model for large eddy simulation of flow in a stirred tank with a Rushton disk turbine
Satish Malik et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2016)
A semi-implicit immersed boundary method and its application to viscous mixing
Bruno Blais et al.
COMPUTERS & CHEMICAL ENGINEERING (2016)
Fluid structure interaction modelling of horizontal-axis wind turbine blades based on CFD and FEA
Lin Wang et al.
JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS (2016)
Computational simulation of mixing flow of shear thinning non-Newtonian fluids with various impellers in a stirred tank
Jaime Sossa-Echeverria et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2015)
Hemodynamic and thrombogenic analysis of a trileaflet polymeric valve using a fluid-structure interaction approach
Filippo Piatti et al.
JOURNAL OF BIOMECHANICS (2015)
A simple, efficient, and high-order accurate curved sliding-mesh interface approach to spectral difference method on coupled rotating and stationary domains
Bin Zhang et al.
JOURNAL OF COMPUTATIONAL PHYSICS (2015)
Optimization design of a reversible pump-turbine runner with high efficiency and stability
Baoshan Zhu et al.
RENEWABLE ENERGY (2015)
Geometrically nonlinear thermomechanical analysis of moderately thick functionally graded plates using a local Petrov-Galerkin approach with moving Kriging interpolation
Ping Zhu et al.
COMPOSITE STRUCTURES (2014)
Using genetic algorithm (GA) and particle swarm optimization (PSO) methods for determination of interaction parameters in multicomponent systems of liquid-liquid equilibria
Milad Asgarpour Khansary et al.
FLUID PHASE EQUILIBRIA (2014)
Rotating reactors - A review
F. Visscher et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2013)
Three-dimensional numerical simulation of a vertical axis tidal turbine using the two-way fluid structure interaction approach
Syed-shah Khalid et al.
JOURNAL OF ZHEJIANG UNIVERSITY-SCIENCE A (2013)
Photocatalytic degradation in annular reactor: Modelization and optimization using computational fluid dynamics (CFD) and response surface methodology (RSM)
Jatinder Kumar et al.
JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2013)
Numerical CFD simulation of a batch stirred tank reactor with stationary catalytic basket
Vania Santos-Moreau et al.
CHEMICAL ENGINEERING JOURNAL (2012)
Numerical simulation of turbulent flow in a baffled stirred tank with an explicit algebraic stress model
Xin Feng et al.
CHEMICAL ENGINEERING SCIENCE (2012)
CFD SIMULATION OF STIRRED TANKS: COMPARISON OF TURBULENCE MODELS. PART I: RADIAL FLOW IMPELLERS
Jyeshtharaj B. Joshi et al.
CANADIAN JOURNAL OF CHEMICAL ENGINEERING (2011)
Experimental and CFD investigation of power consumption in a dual Rushton turbine stirred tank
Mahsa Taghavi et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2011)
An assessment of different turbulence models for predicting flow in a baffled tank stirred with a Rushton turbine
Harminder Singh et al.
CHEMICAL ENGINEERING SCIENCE (2011)
CFD investigation of turbulence models for mechanical agitation of non-Newtonian fluids in anaerobic digesters
Binxin Wu
WATER RESEARCH (2011)
Large-eddy simulation of turbulent flow in a stirred tank driven by a Rushton turbine
R. Zadghaffari et al.
COMPUTERS & FLUIDS (2010)
Multi-objective optimization of cutting parameters in turning process using differential evolution and non-dominated sorting genetic algorithm-II approaches
S. H. Yang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2010)
Various approaches for constructing an ensemble of metamodels using local measures
Erdem Acar
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2010)
Hollow self-inducing impellers for gas-liquid-solid dispersion: Experimental and computational study
B. N. Murthy et al.
CHEMICAL ENGINEERING JOURNAL (2008)
Using electrical resistance tomography and computational fluid dynamics modeling to study the formation of cavern in the mixing of pseudoplastic fluids possessing yield stress
Leila Pakzad et al.
CHEMICAL ENGINEERING SCIENCE (2008)
Aggregate testing using 2nd-, 7th- and 10th-order interpolation polynomials
Vivian W. Y. Tam et al.
RESOURCES CONSERVATION AND RECYCLING (2007)
CFD analysis of caverns and pseudo-caverns developed during mixing of non-newtonian fluids
L. W. Adams et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2007)
Design of multiple impeller stirred tanks for the mixing of highly viscous fluids using CFD
J Aubin et al.
CHEMICAL ENGINEERING SCIENCE (2006)
Effect of impeller design on the flow pattern and mixing in stirred tanks
T Kumaresan et al.
CHEMICAL ENGINEERING JOURNAL (2006)
Multi-objective optimization of reverse osmosis desalination units using different adaptations of the non-dominated sorting genetic algorithm (NSGA)
C Guria et al.
COMPUTERS & CHEMICAL ENGINEERING (2005)
Modeling turbulent flow in stirred tanks with CFD: the influence of the modeling approach, turbulence model and numerical scheme
J Aubin et al.
EXPERIMENTAL THERMAL AND FLUID SCIENCE (2004)
Mechanical properties of structural steel at elevated temperatures and after cooling down
J Outinen et al.
FIRE AND MATERIALS (2004)
CFD study of power and mixing time for paddle mixing in unbaffled vessels
SM Shekhar et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2002)
A fast and elitist multiobjective genetic algorithm: NSGA-II
K Deb et al.
IEEE TRANSACTIONS ON EVOLUTIONARY COMPUTATION (2002)
Computational fluid dynamics applications on parallel-vector computers: computations of stirred vessel flows
C Bartels et al.
COMPUTERS & FLUIDS (2002)
Share Paper
