4.3 Article

Combined effects of double porous layers and nanofluids on the performance of confined single and multi-jet impingement heat transfer

Related references

Note: Only part of the references are listed.
Article Green & Sustainable Science & Technology

Performance assessment of a thermoelectric module by using rotating circular cylinders and nanofluids in the channel flow for renewable energy applications

Fatih Selimefendigil et al.

Summary: The study showed that using rotating cylinders in the channel can enhance the power of the TEG module. A higher number of cylinders provide greater power enhancements in the module, and the inclusion of nanoparticles can effectively improve TEG power when the system performance is low.

JOURNAL OF CLEANER PRODUCTION (2021)

Article Engineering, Mechanical

Performance of TEG integrated channel with area expansion by using advanced passive techniques

Fatih Selimefendigil et al.

Summary: This study investigated the impact of flow separation on the power generation and conversion efficiency of a thermoelectric generator integrated channel flow with area expansion through numerical simulations. Results showed that using an eccentric conic object near the thermoelectric device and adding hybrid nano-sized particles in the heat transfer fluid can enhance system performance. Different parameters such as Reynolds number, expansion ratio, aspect ratio, location and size of the eccentric cone, and solid nanoparticle volume fraction were studied to understand their effects on fluid flow and power generation characteristics. The study also revealed that changing the object location is more favorable than increasing the size and aspect ratio of the cone for power generation, conversion efficiency, and pressure drop features.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

Article Engineering, Chemical

Impacts of elasticity and porosity of the channels on the performance features of thermoelectric module mounted system and efficient computations with multi-proper orthogonal decomposition approach

Fatih Selimefendigil et al.

Summary: The presence of elastic walls has a slight impact on power variation, while the presence of a porous layer alters power generation features significantly. Increasing the permeability and height of the porous layer results in higher thermoelectric power generation, with the highest increment amounts being 32% for the highest permeability and 17% for the highest porous layer height. The length of the porous layer in the flow direction has a slight impact on power generation, while introducing nano-sized particles further enhances power generation.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2021)

Review Green & Sustainable Science & Technology

Review of heat transfer enhancement techniques for single phase flows

Mohamed H. Mousa et al.

Summary: Enhancing heat transfer between fluids and walls is crucial for improving performance. By utilizing features that enhance heat transfer, equipment size can be reduced, costs minimized, and safety risks mitigated.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)

Review Green & Sustainable Science & Technology

Heat transfer intensification of jet impingement using exciting jets - A comprehensive review

Hussein M. Maghrabie

Summary: The efficiency, availability, and reliability of thermal management in various engineering applications pose a crucial challenge for designers and engineers. The study comprehensively reviews the heat transfer characteristics and fluid flow behavior of jet impingement with recent modifications, as well as the critical methods of passive and active exciting jets. The excitation of jets causes flow topological metamorphosis and significantly impacts heat transfer enhancement.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)

Article Green & Sustainable Science & Technology

Experimental study of a hemispherical three-dimensional solar collector operating with silver-water nanofluid

Mojtaba Moravej et al.

Summary: The experimental study evaluated a fixed three-dimensional solar collector with a hemispherical geometry according to ASHRAE standards. Results showed that the collector exhibited promising thermal performance due to its geometry and pipe arrangement, making it a viable option for domestic and industrial deployment. Switching from water to Ag-water nanofluid led to an average efficiency increase of around 11%, with the highest efficiency of 61.1% achieved at a nanoparticle concentration of 0.3% and a flow rate of 0.6 GPM.

SUSTAINABLE ENERGY TECHNOLOGIES AND ASSESSMENTS (2021)

Article Thermodynamics

Al2O3-Water Nanofluid Jet Impingement Cooling With Magnetic Field

Fatih Selimefendigil et al.

HEAT TRANSFER ENGINEERING (2020)

Review Physics, Multidisciplinary

Internal convective heat transfer of nanofluids in different flow regimes: A comprehensive review

Samina Javed et al.

PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS (2020)

Article Thermodynamics

MHD enhanced nanofluid mediated heat transfer in porous metal for CPU cooling

Aliakbar Izadi et al.

APPLIED THERMAL ENGINEERING (2020)

Article Green & Sustainable Science & Technology

Heat transfer enhancement in a flat plate solar collector with different flow path shapes using nanofluid

Mohammad Reza Saffarian et al.

RENEWABLE ENERGY (2020)

Article Computer Science, Artificial Intelligence

Impact of finite wavy wall thickness on entropy generation and natural convection of nanofluid in cavity partially filled with non-Darcy porous layer

Ammar Alsabery et al.

NEURAL COMPUTING & APPLICATIONS (2020)

Article Thermodynamics

Numerical investigation of heat transfer enhancement of an inclined heated offset jet

Meriem Ajmi et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2020)

Article Engineering, Mechanical

Effects of local curvature and magnetic field on forced convection in a layered partly porous channel with area expansion

Fatih Selimefendigil et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

Review Chemistry, Physical

Investigation of nanoparticle effects on jet impingement heat transfer: A review

Javad Mohammadpour et al.

JOURNAL OF MOLECULAR LIQUIDS (2020)

Article Energy & Fuels

Heat transfer characteristics of free nanofluid impinging jet on flat surface with different jet to plate distance: An experimental investigation

Surendra D. Barewar et al.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2019)

Review Engineering, Chemical

A comprehensive review on mixed convection of nanofluids in various shapes of enclosures

Sina Izadi et al.

POWDER TECHNOLOGY (2019)

Review Thermodynamics

Hybrid heat transfer enhancement for latent-heat thermal energy storage systems: A review

Jasim M. Mahdi et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

Article Mechanics

Coherence resonance in low-density jets

Yuanhang Zhu et al.

JOURNAL OF FLUID MECHANICS (2019)

Article Thermodynamics

Airfoil shaped pin-fin heat sink: Potential evaluation of ferric oxide and titania nanofluids

Hamza Babar et al.

ENERGY CONVERSION AND MANAGEMENT (2019)

Review Physics, Multidisciplinary

Recent advances in modeling and simulation of nanofluid flows-Part I: Fundamentals and theory

Omid Mahian et al.

PHYSICS REPORTS-REVIEW SECTION OF PHYSICS LETTERS (2019)

Article Thermodynamics

Mixed convection of Al2O3-water nanofluid in a lid-driven cavity having two porous layers

Marina S. Astanina et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

Article Engineering, Mechanical

Mixed convection and entropy generation in a nanofluid filled cubical open cavity with a central isothermal block

Abdullah A. A. A. Al-Rashed et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)

Article Thermodynamics

Cooling of a Partially Elastic Isothermal Surface by Nanofluids Jet Impingement

Fatih Selimefendigil et al.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2018)

Review Green & Sustainable Science & Technology

Efficiency improvement of solar photovoltaic/solar air collectors by using impingement jets: A review

Rahul Nadda et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)

Article Thermodynamics

Jet impingement cooling and optimization study for a partly curved isothermal surface with CuO-water nanofluid

Fatih Selimefendigil et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2017)

Article Thermodynamics

Experimental investigation of heat transfer and pressure drop in a straight minichannel heat sink using TiO2 nanofluid

Waqas Arshad et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

Article Engineering, Mechanical

Two-phase simulation of non-Newtonian nanofluid natural convection in a circular annulus partially or completely filled with porous media

Majid Siavashi et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2017)

Article Thermodynamics

Investigation of turbulence effects within porous layer on the thermal performance of a partially filled pipe

Majid Eshagh Nimvari et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2017)

Article Materials Science, Multidisciplinary

MHD natural convection in an inclined square porous cavity with a heat conducting solid block

C. Sivaraj et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2017)

Article Engineering, Multidisciplinary

Numerical investigation of semi-confined turbulent slot jet impingement on a concave surface using an Al2O3-water nanofluid

H. Ahmadi et al.

APPLIED MATHEMATICAL MODELLING (2016)

Article Thermodynamics

Thermal and fluid dynamic behaviors of confined laminar impinging slot jets with nanofluids

Oronzio Manca et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2016)

Article Thermodynamics

Mixed convection in a partially layered porous cavity with an inner rotating cylinder

Ali J. Chamkha et al.

NUMERICAL HEAT TRANSFER PART A-APPLICATIONS (2016)

Article Engineering, Multidisciplinary

Effects of phase shift on the heat transfer characteristics in pulsating mixed convection flow in a multiple vented cavity

Fatih Selimefendigil et al.

APPLIED MATHEMATICAL MODELLING (2015)

Article Thermodynamics

Experimental investigation of submerged single jet impingement using Cu-water nanofluid

Qiang Li et al.

APPLIED THERMAL ENGINEERING (2012)

Article Thermodynamics

Heat transfer enhancement by multiple swirling impinging jets with twisted-tape swirl generators

C. Nuntadusit et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2012)

Article Nanoscience & Nanotechnology

Numerical study of a confined slot impinging jet with nanofluids

Oronzio Manca et al.

NANOSCALE RESEARCH LETTERS (2011)

Article Engineering, Multidisciplinary

VISCOELASTIC AIR-BLAST SPRAYS IN A CROSS-FLOW. PART 1: PENETRATION AND DISPERSION

Larry K. B. Li et al.

ATOMIZATION AND SPRAYS (2010)

Article Engineering, Multidisciplinary

VISCOELASTIC AIR-BLAST SPRAYS IN A CROSS-FLOW. PART 2: DROPLET VELOCITIES

Larry K. B. Li et al.

ATOMIZATION AND SPRAYS (2010)

Article Thermodynamics

A numerical study of heat transfer performance of oscillatory impinging jets

Buddhika N. Hewakandamby

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2009)

Article Thermodynamics

Convective heat and solute transfer in partially porous cavities

D Gobin et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2005)

Article Thermodynamics

Transient free convection in a square cavity filled with a porous medium

NH Saeid et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2004)

Article Thermodynamics

Heat transfer enhancement of impinging jets using mesh screens

DW Zhou et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2004)

Article Thermodynamics

Entropy generation for natural convection in an inclined porous cavity

AC Baytas

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2000)