Related references
Note: Only part of the references are listed.A novel approach to fabricate ceramic/metal interpenetrating phase composites by ultrasonic-assisted spontaneous infiltration
Yushi Qi et al.
CERAMICS INTERNATIONAL (2021)
Gelatin tailored pore structure and mechanical properties of freeze-cast porous boron carbide ceramics
Yang Wang et al.
CERAMICS INTERNATIONAL (2021)
Fabrication of co-continuous SiC/Al composites from novel SiC preforms with high porosity and controllable pore size
Yicheng Jin et al.
CERAMICS INTERNATIONAL (2021)
Porous ceramics: Light in weight but heavy in energy and environment technologies
Yu Chen et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2021)
Effects of foam structure on the wear behavior of co-continuous SiC3D/Al composite materials
Lihua Fu et al.
APPLIED SURFACE SCIENCE (2021)
Effect of MgO sintering additive on mullite structures manufactured by fused deposition modeling (FDM) technology
Fateme Sarraf et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)
Effect of oxidization of 3D-SiC preforms on the interfacial structure and mechanical properties of co-continuous SiC/Al composites
Jingbo Zhu et al.
CERAMICS INTERNATIONAL (2021)
Structure and performance control of porous Si3N4 ceramics fabricated by freeze-drying process
Mengyong Sun et al.
CERAMICS INTERNATIONAL (2021)
2D and 3D in-situ mechanical testing of an interpenetrating metal ceramic composite consisting of a slurry-based ceramic foam and AlSi10Mg
Joel Schukraft et al.
COMPOSITE STRUCTURES (2021)
Dendritic porous alumina with high porosity by directional freeze casting using a binary solution for bacterial removal
Lixia Zhu et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)
Processing and characterization of Al-Si alloy/SiC foam interpenetrating phase composite
Navya Kota et al.
MATERIALS TODAY-PROCEEDINGS (2021)
Fiber reinforced metal matrix composites - a review
Shashi Bahl
MATERIALS TODAY-PROCEEDINGS (2021)
Effect of lattice surface treatment on performance of hardmetal - titanium interpenetrating phase composites
Yaroslav Holovenko et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2020)
Micromechanics-based analyses of short fiber-reinforced composites with functionally graded interphases
Yang Yang et al.
JOURNAL OF COMPOSITE MATERIALS (2020)
Effect of ceramic preform freeze-casting temperature and melt infiltration technique on the mechanical properties of a lamellar metal/ceramic composite
Siddhartha Roy et al.
JOURNAL OF COMPOSITE MATERIALS (2020)
Effect of Si alloying content on the microstructure and thermophysical properties of SiC honeycomb/Al-Mg-Si composites prepared by spontaneous infiltration
Zhejian Zhang et al.
CERAMICS INTERNATIONAL (2020)
Highly porous silica foams prepared via direct foaming with mixed surfactants and their sound absorption characteristics
Zhongpei Du et al.
CERAMICS INTERNATIONAL (2020)
The fracture properties of metal-ceramic composites manufactured via stereolithography
Bhargavi Mummareddy et al.
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2020)
Influence of matrix property and interfacial reaction on the mechanical performance and fracture mechanism of TiC reinforced Al matrix lamellar composites
Rui-Fen Guo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Research status and development of magnesium matrix composites
Guohong Ma et al.
MATERIALS SCIENCE AND TECHNOLOGY (2020)
Anisotropic thermal expansion behavior of an interpenetrating metal/ceramic composite
Siddhartha Roy et al.
THERMOCHIMICA ACTA (2020)
Numerical and Experimental Characterization of Elastic Properties of a Novel, Highly Homogeneous Interpenetrating Metal Ceramic Composite
Dominik Horny et al.
ADVANCED ENGINEERING MATERIALS (2020)
Development of ethylene glycol-based gelcasting for the preparation of highly porous SiC ceramics
Yicheng Jin et al.
CERAMICS INTERNATIONAL (2020)
Highly conductive wear resistant Cu/Ti3SiC2(TiC/SiC) co-continuous composites via vacuum infiltration process
Dexuan Yang et al.
JOURNAL OF ADVANCED CERAMICS (2020)
Microstructure and permeability of porous YSZ ceramics fabricated by freeze casting of oil-in-water suspension
Xueqing Li et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)
Influence of template strut morphology on the mechanical performance of SiC reticulated porous ceramics
Xiong Liang et al.
CERAMICS INTERNATIONAL (2020)
Design of binder jet additive manufactured co-continuous ceramic-reinforced metal matrix composites
Pablo D. Enrique et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)
The sound absorption performance of the highly porous silica ceramics prepared using freeze casting method
Zhongpei Du et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2020)
30 Years of functionally graded materials: An overview of manufacturing methods, Applications and Future Challenges
Bassiouny Saleh et al.
COMPOSITES PART B-ENGINEERING (2020)
Additive manufacturing of copper/diamond composites for thermal management applications
Loic Constantin et al.
MANUFACTURING LETTERS (2020)
Fabrication, microstructure and mechanical properties of co-continuous TiCx/Cu-Cu4Ti composites prepared by pressureless-infiltration method
Cong Lei et al.
CERAMICS INTERNATIONAL (2019)
Bi-directional freeze casting of porous alumina ceramics: A study of the effects of different processing parameters on microstructure
Sana Algharaibeh et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)
Control of pore structure during freeze casting of porous SiC ceramics by different freezing modes
Ning Wang et al.
CERAMICS INTERNATIONAL (2019)
Fabrication and properties of a high porosity h-BN-SiO2 ceramics fabricated by stereolithography-based 3D printing
Zhuo Tian et al.
MATERIALS LETTERS (2019)
Alternative Process Routes to Manufacture Porous CeramicsOpportunities and Challenges
Uwe Scheithauer et al.
MATERIALS (2019)
Fabrication of Porous Materials by Spark Plasma Sintering: A Review
Dina V. Dudina et al.
MATERIALS (2019)
Low-temperature preparation of porous SiC ceramics using phosphoric acid as a pore-forming agent and a binder
Tian Gu et al.
CERAMICS INTERNATIONAL (2019)
Particulate metal matrix composites and their fabrication via friction stir processing - a review
Padmakumar A. Bajakke et al.
MATERIALS AND MANUFACTURING PROCESSES (2019)
Internal load transfer in an interpenetrating metal/ceramic composite material studied using energy dispersive synchrotron X-ray diffraction
Siddhartha Roy et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Preparation and anisotropic thermophysical properties of SiC honeycomb/Al-Mg-Si composite via spontaneous infiltration
Zhejian Zhang et al.
PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2019)
Titanium metal matrix composites: An overview
Muhammad D. Hayat et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Novel design of elongated mullite reinforced highly porous alumina ceramics using carbonized rice husk as pore-forming agent
Jingjing Liu et al.
CERAMICS INTERNATIONAL (2019)
Preparation of porous silicon nitride ceramics by freeze drying
Xiao Chun-fang et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)
A review on aqueous gelcasting: A versatile and low-toxic technique to shape ceramics
Laura Montanaro et al.
CERAMICS INTERNATIONAL (2019)
A review on machining and optimization of particle-reinforced metal matrix composites
Jianguang Li et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
The preparation and characterization of porous alumina ceramics using an eco-friendly pore-forming agent
Julian Alzukaimi et al.
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2019)
Processing and characterization of elastic and thermal expansion behaviour of interpenetrating Al12Si/alumina composites
Siddhartha Roy et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Freeze-cast yttria-stabilized zirconia pore networks: Effects of alcohol additives
Sarah Miller et al.
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2018)
Highly porous Y2SiO5 ceramic with extremely low thermal conductivity prepared by foam-gelcasting-freeze drying method
Zhen Wu et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2018)
Processing issues, machining, and applications of aluminum metal matrix composites
Jigar Suthar et al.
MATERIALS AND MANUFACTURING PROCESSES (2018)
Strong and tough metal/ceramic micro-laminates
Claudio Ferraro et al.
ACTA MATERIALIA (2018)
Porous SiC ceramics with dendritic pore structures by freeze casting from chemical cross-linked polycarbosilane
Fengdan Xue et al.
CERAMICS INTERNATIONAL (2018)
Porous fibrous ZrO2-mullite ceramics prepared via tert-butyl alcohol-based gel-casting
Xinghui Hou et al.
CERAMICS INTERNATIONAL (2018)
Interface design in 3D-SiC/Al-Si-Mg interpenetrating composite fabricated by pressureless infiltration
Dongmei Wang et al.
CERAMICS INTERNATIONAL (2018)
Fabrication of porous ceramics with double-pore structure by stepwise freeze casting using water/diphenyl methane emulsion
Yufei Tang et al.
CERAMICS INTERNATIONAL (2018)
Macroporous alumina structures tailored by freeze-casting using naphthalene-camphor as freezing vehicle
Lucas D. Lacerda et al.
CERAMICS INTERNATIONAL (2018)
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Tuan D. Ngo et al.
COMPOSITES PART B-ENGINEERING (2018)
Effect of Si3N4 solid contents on mechanical and dielectric properties of porous Si3N4 ceramics through freeze-drying
Ling Li et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Three-dimensional interpenetrating network graphene/copper composites with simultaneously enhanced strength, ductility and conductivity
Zhijun Qiao et al.
MATERIALS LETTERS (2018)
Effectively reinforced load transfer and fracture elongation by forming Al4C3 for in-situ synthesizing carbon nanotube reinforced Al matrix composites
Xinghai Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Effect of microstructure on mechanical properties and residual stresses in interpenetrating aluminum-alumina composites fabricated by squeeze casting
Justyna Maj et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Simulation of anisotropic load transfer and stress distribution in sicp/Al composites subjected to tensile loading
J. F. Zhang et al.
MECHANICS OF MATERIALS (2018)
Freeze casting - A review of processing, microstructure and properties via the open data repository, FreezeCasting.net
Kristen L. Scotti et al.
PROGRESS IN MATERIALS SCIENCE (2018)
Multimodal particle distribution in 3D-SiC/Al-Si-Mg interpenetrating composite fabricated by pressureless infiltration
Dongmei Wang et al.
CERAMICS INTERNATIONAL (2018)
Porous bioceramics produced by inkjet 3D printing: Effect of printing ink formulation on the ceramic macro and micro porous architectures control
Boqing Zhang et al.
COMPOSITES PART B-ENGINEERING (2018)
Enhanced fracture toughness-in architected-interpenetrating phase composites by 3D printing
Tiantian Li et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2018)
Freeze casting of novel porous silicate cement supports using tert-butyl alcohol-water binary crystals as template: Microstructure, strength and permeability
Senjie Dong et al.
JOURNAL OF MEMBRANE SCIENCE (2017)
Fabrication of porous silica ceramics by gelation-freezing of diatomite slurry
Chika Matsunaga et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2017)
High damage-tolerance bio-inspired ZL205A/SiC composites with a lamellar-interpenetrated structure
Alateng Shaga et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Processing of preceramic polymer to low density silicon carbide foam
Prasanta Jana et al.
MATERIALS & DESIGN (2017)
Processing Induced Flaws in Aluminum-Alumina Interpenetrating Phase Composites
Michal Basista et al.
ADVANCED ENGINEERING MATERIALS (2017)
Carbon fiber reinforced metal matrix composites: Fabrication processes and properties
Kamyar Shirvanimoghaddam et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
Recent advances in 3D printing of porous ceramics: A review
Lim Chin Hwa et al.
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2017)
Reticulated Replica Ceramic Foams: Processing, Functionalization, and Characterization
Tobias Fey et al.
ADVANCED ENGINEERING MATERIALS (2017)
Fabrication of an A356/fly-ash-mullite interpenetrating composite and its wear properties
Jianbin Zhu et al.
CERAMICS INTERNATIONAL (2017)
Tribological Properties of AlSi12-Al2O3 Interpenetrating Composite Layers in Comparison with Unreinforced Matrix Alloy
Anna Janina Dolata
MATERIALS (2017)
Interfacial structure and stability of a co-continuous SiC/Al composite prepared by vacuum-pressure infiltration
Jingbo Zhu et al.
CERAMICS INTERNATIONAL (2017)
Developing high toughness and strength Al/TiC composites using ice-templating and pressure infiltration
Ya Wang et al.
CERAMICS INTERNATIONAL (2017)
Lamellar-interpenetrated Al-Si Mg/Al2O3-ZrO2 composites prepared by freeze casting and pressureless infiltration
Rui-Fen Guo et al.
CERAMICS INTERNATIONAL (2017)
Research trend in the development of macroporous ceramic components by pore forming additives from natural organic matters: A short review
T. T. Dele-Afolabi et al.
CERAMICS INTERNATIONAL (2017)
Cutting resistance of metal-ceramic interpenetrating composites
Jing Liu et al.
CERAMICS INTERNATIONAL (2017)
Pulse electric current sintering of 3D interpenetrating SiC/Al composites
Bo Wang et al.
CERAMICS INTERNATIONAL (2017)
Enhanced thermal conductive 3D-SiC/Al-Si-Mg interpenetrating composites fabricated by pressureless infiltration
Dongmei Wang et al.
CERAMICS INTERNATIONAL (2017)
Effect of Ductile Agents on the Dynamic Behavior of SiC3D Network Composites
Jingbo Zhu et al.
APPLIED COMPOSITE MATERIALS (2016)
Fabrication of SiC reticulated porous ceramics with multi-layered struts for porous media combustion
Xiong Liang et al.
CERAMICS INTERNATIONAL (2016)
Effects of oxide addition on the microstructure and mechanical properties of lamellar SiC scaffolds and Al-Si-Mg/SiC composites prepared by freeze casting and pressureless infiltration
Alateng Shaga et al.
CERAMICS INTERNATIONAL (2016)
A review of fabrication strategies and applications of porous ceramics prepared by freeze-casting method
Ruiping Liu et al.
CERAMICS INTERNATIONAL (2016)
Effects of pore structure on thermal conductivity and strength of alumina porous ceramics using carbon black as pore-forming agent
Jingjing Liu et al.
CERAMICS INTERNATIONAL (2016)
Thermal conductivity of ceramic/metal composites from preforms produced by freeze casting
D. Hautcoeur et al.
CERAMICS INTERNATIONAL (2016)
Fabrication and Structure Characterization of Alumina-Aluminum Interpenetrating Phase Composites
Anna J. Dolata
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2016)
Fabrication and morphology control of highly porous mullite thermal insulators prepared by gelation freezing route
Manabu Fukushima et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2016)
Porous polymer derived ceramics
Cekdar Vakifahmetoglu et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2016)
Fabrication and properties of porous silicon nitride wave-transparent ceramics via gel-casting and pressureless sintering
Xuejin Yang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Effect of Remelting Duration on Microstructure and Properties of SiCp/Al Composite Fabricated by Powder-Thixoforming for Electronic Packaging
Siyu Cai et al.
METALS (2016)
The Fabrication and Properties of the Squeeze-Cast TiN/Al Composites
Yuan Lu et al.
MATERIALS AND MANUFACTURING PROCESSES (2016)
Functionally graded materials: A review of fabrication and properties
Minoo Naebe et al.
APPLIED MATERIALS TODAY (2016)
Porous ceramic materials by pore-forming agent method: An intermingled fractal units analysis and procedure to predict thermal conductivity
Giorgio Pia et al.
CERAMICS INTERNATIONAL (2015)
Preparation and characterization of porous mullite ceramics via foam-gelcasting
Xiangong Deng et al.
CERAMICS INTERNATIONAL (2015)
Fabrication and thermophysical properties of porous TiB2 ceramics fabricated by reactive spark plasma sintering
Jing Wang
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2015)
Porous Si3N4 Ceramics Prepared by TBA-based Gel-casting
Liuyuan Li et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2015)
Dry friction and wear performance of co-continuous Al-23Si/SiC composites
H. Yan et al.
MATERIALS RESEARCH INNOVATIONS (2015)
Lamellar-interpenetrated Al-Si-Mg/SiC composites fabricated by freeze casting and pressureless infiltration
Alateng Shaga et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Preparation and its cavitation performance of nickel foam/epoxy/SiC co-continuous composites
Y. Liu et al.
WEAR (2015)
Porous YbB6 Ceramics Prepared by In Situ Reaction between Yb2O3 and B4C Combined with Partial Sintering
Xiao-Fei Wang et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2015)
Damage evolution in freeze cast metal/ ceramic composites exhibiting lamellar microstructures
C. Simpson et al.
FRATTURA ED INTEGRITA STRUTTURALE (2015)
CENTRIFUGAL CASTINGS LOCALLY REINFORCED WITH POROUS Al2O3 PREFORM
A. J. Dolata
ARCHIVES OF METALLURGY AND MATERIALS (2014)
Processing and properties of advanced porous ceramics: An application based review
E. C. Hammel et al.
CERAMICS INTERNATIONAL (2014)
Damage evolution and distribution of interpenetrating phase composites under dynamic loading
Fu-chi Wang et al.
CERAMICS INTERNATIONAL (2014)
Macroporous ceramics: Novel route using partial sintering of alumina-powder agglomerates obtained by spray-drying
Guillaume Jean et al.
CERAMICS INTERNATIONAL (2014)
Fabrication and microstructure of porous SiC ceramics using suspension emulsions as pore-forming agents
Huibin Ge et al.
CERAMICS INTERNATIONAL (2014)
Thermophysical properties of SiC/Al composites with three dimensional interpenetrating network structure
Shun Li et al.
CERAMICS INTERNATIONAL (2014)
Infiltrated Cu8Al-Ti alumina composites
C. Krueger et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)
Fabrication of a new SiC/2024Al co-continuous composite with lamellar microstructure and high mechanical properties
Qiang Liu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Low Cost Porous Alumina with Tailored Microstructure and Thermal Conductivity Prepared using Rice Husk and Sucrose
Kalyani Mohanta et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2014)
Novel porous Si3N4 ceramics prepared by aqueous gelcasting using Si3N4 poly-hollow microspheres as pore-forming agent
Jia-Min Wu et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2014)
Microstructure and thermal expansion behavior of diamond/SiC/(Si) composites fabricated by reactive vapor infiltration
Zhenliang Yang et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2014)
Composite structure modeling and mechanical behavior of particle reinforced metal matrix composites
Yishi Su et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Powder injection moulding of metal ceramic interpenetrating phase composites
S. B. Hein
POWDER METALLURGY (2014)
Microstructure and properties of SiCp/Al electronic packaging shell produced by liquid-solid separation
Ming-hai Guo et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2014)
Current-Activated, Pressure-Assisted Infiltration: A Novel, Versatile Route for Producing Interpenetrating Ceramic-Metal Composites
Liangfa Hu et al.
MATERIALS RESEARCH LETTERS (2014)
Load partitioning study in a 3D interpenetrating AlSi12/Al2O3 metal/ceramic composite
Siddhartha Roy et al.
MECHANICAL STRESS EVALUATION BY NEUTRONS AND SYNCHROTRON RADIATION VI (2014)
Manufacturing and Characterization of Interpenetrating SiC Lightweight Composites
M. Merzkirch et al.
PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON MANUFACTURING OF LIGHTWEIGHT COMPONENTS: MANULIGHT 2014 (2014)
Structure of aluminium matrix composite with ceramic preform obtained by centrifugal infiltration process
Anna J. Dolata
TECHNOLOGIES AND PROPERTIES OF MODERN UTILITY MATERIALS XXI (2014)
Effect of the addition of polyvinylpyrrolidone as a pore-former on microstructure and mechanical strength of porous alumina ceramics
Yi Feng et al.
CERAMICS INTERNATIONAL (2013)
Porous yttria-Stabilized Zirconia Ceramics Fabricated by Nonaqueous-Based Gelcasting Process with PMMA Microsphere as Pore-Forming Agent
Jun Zhou et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2013)
Characterization of Elastic Properties in Porous Silicon Carbide Preforms Fabricated Using Polymer Waxes as Pore Formers
Siddhartha Roy et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2013)
Effects of mono-dispersed PMMA micro-balls as pore-forming agent on the properties of porous YSZ ceramics
Ruiping Liu et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2013)
Numerical study of internal load transfer in metal/ceramic composites based on freeze-cast ceramic preforms and experimental validation
Yuriy Sinchuk et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Microstructural control of macroporous silicon carbide
Manabu Fukushima
JOURNAL OF THE CERAMIC SOCIETY OF JAPAN (2013)
Production and permeability of porous Si3N4 ceramics produced by starch addition
Gulsum Topates et al.
JOURNAL OF ASIAN CERAMIC SOCIETIES (2013)
Preparation and characterization of porous alumina ceramics through starch consolidation casting technique
R. M. Khattab et al.
CERAMICS INTERNATIONAL (2012)
Production of high strength Al-Al2O3 composite by accumulative roll bonding
M. Rezayat et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)
Macro-porous ceramics: processing and properties
T. Ohji et al.
INTERNATIONAL MATERIALS REVIEWS (2012)
Silicon carbide-based foams from direct blowing of polycarbosilane
Manabu Fukushima et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2012)
Fabrication of porous alumina green bodies from suspension emulsions by gelcasting
Bo Yuan et al.
MATERIALS LETTERS (2012)
Cellular ceramics produced by rapid prototyping and replication
Alberto Ortona et al.
MATERIALS LETTERS (2012)
Influence of silicon carbide particulates on tensile fracture behavior of an aluminum alloy
K. Manigandan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Internal load transfer and damage evolution in a 3D interpenetrating metal/ceramic composite
Siddhartha Roy et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Thermal and mechanical properties of Al/Al2O3 composites at elevated temperatures
Pradeep Gudlur et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Dry sliding wear behaviour of co-continuous ceramic foam/aluminium alloy interpenetrating composites produced by pressureless infiltration
Jing Liu et al.
WEAR (2012)
Three-dimensional printing of hierarchical and tough mesoporous bioactive glass scaffolds with a controllable pore architecture, excellent mechanical strength and mineralization ability
Chengtie Wu et al.
ACTA BIOMATERIALIA (2011)
Investigation of structure formation during freeze-casting from very slow to very fast solidification velocities
T. Waschkies et al.
ACTA MATERIALIA (2011)
Internal load transfer in a metal matrix composite with a three-dimensional interpenetrating structure
S. Roy et al.
ACTA MATERIALIA (2011)
MICROSTRUCTURE AND PHYSICAL PROPERTIES OF AlMg/Al2O3 INTERPENETRATING COMPOSITES FABRICATED BY METAL INFILTRATION INTO CERAMIC FOAMS
M. Potoczek et al.
ARCHIVES OF METALLURGY AND MATERIALS (2011)
Effect of bentonite addition on fabrication of reticulated porous SiC ceramics for liquid metal infiltration
Ugur Soy et al.
CERAMICS INTERNATIONAL (2011)
Analysis of the elastic properties of an interpenetrating AlSi12-Al2O3 composite using ultrasound phase spectroscopy
Siddhartha Roy et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2011)
Microstructure and mechanical properties of friction stir welded particulate reinforced AA2124/SiC/25p-T4 composite
Yahya Bozkurt et al.
JOURNAL OF COMPOSITE MATERIALS (2011)
3D printing of Al2O3/Cu-O interpenetrating phase composite
Reinhold Melcher et al.
JOURNAL OF MATERIALS SCIENCE (2011)
Process control and optimized preparation of porous alumina ceramics by starch consolidation casting
E. Gregorova et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2011)
Complete determination of elastic moduli of interpenetrating metal/ceramic composites using ultrasonic techniques and micromechanical modelling
Siddhartha Roy et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Microstructures of Co-continuous SiC/Fe-2Cr13 Composite Fabricated by Vacuum-Pressure Casting and Infiltration Processes
Liang Yu et al.
ADVANCED MATERIALS, PTS 1-4 (2011)
Damage evolution and domain-level anisotropy in metal/ceramic composites exhibiting lamellar microstructures
Siddhartha Roy et al.
ACTA MATERIALIA (2010)
Metal Matrix Composites
Andreas Mortensen et al.
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 40 (2010)
Microstructure and mechanical properties of co-continuous metal/ceramic composites obtained from Reactive Metal Penetration of commercial aluminium alloys into cordierite
Diego Manfredi et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)
Influence of reinforcement contiguity on the thermal expansion of alumina particle reinforced aluminium composites
Ghodratollah Roudini et al.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH (2010)
Production and characterization of a three-dimensional cellular metal-filled ceramic composite
D. Cree et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2010)
Microstructure and property characterisation of 3-3 Al(Mg)/Al2O3 interpenetrating composites produced by a pressureless infiltration technique
Hong Chang et al.
JOURNAL OF MATERIALS SCIENCE (2010)
Fabrication of porous alumina ceramics having cell windows with controlled size by PMMA template method
Kazutaka Kamitani et al.
JOURNAL OF MATERIALS SCIENCE (2010)
Porous yttria-stabilized zirconia ceramics with ultra-low thermal conductivity
LiangFa Hu et al.
JOURNAL OF MATERIALS SCIENCE (2010)
Characteristics of microbubbles generated by porous mullite ceramics prepared by an extrusion method using organic fibers as the pore former
Kiyoshi Okada et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2010)
Processing of microcellular silicon carbide ceramics with a duplex pore structure
In-Hyuck Song et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2010)
A novel biomimetic approach to the design of high-performance ceramic-metal composites
Maximilien E. Launey et al.
JOURNAL OF THE ROYAL SOCIETY INTERFACE (2010)
Effects of Mg content on microstructure and mechanical properties of SiCp/Al-Mg composites fabricated by semi-solid stirring technique
Geng Lin et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2010)
Dry sliding wear behaviour of Al(Mg)/Al2O3 interpenetrating composites produced by a pressureless infiltration technique
Hong Chang et al.
WEAR (2010)
Load partitioning in honeycomb-like silicon carbide aluminum alloy composites
T. E. Wilkes et al.
ACTA MATERIALIA (2009)
Load partitioning in Al2O3-Al composites with three-dimensional periodic architecture
M. L. Young et al.
ACTA MATERIALIA (2009)
In situ Study of Internal Load Transfer in a Novel Metal/Ceramic Composite Exhibiting Lamellar Microstructure Using Energy Dispersive Synchrotron X-ray Diffraction
Siddhartha Roy et al.
ADVANCED ENGINEERING MATERIALS (2009)
Preparation and properties of NiAl(Si)/Al2O3 co-continuous composites obtained by reactive metal penetration
Diego Manfredi et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2009)
Elastic constants of metal/ceramic composites with lamellar microstructures: Finite element modelling and ultrasonic experiments
Tobias Ziegler et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2009)
Forging of the AA2618/20 vol.% Al2O3p composite: Effects on microstructure and tensile properties
L. Ceschini et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2009)
Analysis of crack propagation resistance of Al-Al2O3 particulate-reinforced composite friction stir welded butt joints
A. Pirondi et al.
INTERNATIONAL JOURNAL OF FATIGUE (2009)
Hierarchically Porous Ceramics from Diatomite Powders by Pulsed Current Processing
Farid Akhtar et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2009)
Processing of ceramic-metal interpenetrating composites
Jon Binner et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2009)
Porosity control of porous silicon carbide ceramics
Su-Ho Chae et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2009)
Capillary rise properties of porous mullite ceramics prepared by an extrusion method using organic fibers as the pore former
Kiyoshi Okada et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2009)
Reticulated macroporous ceramic foam supported TiO2 for photocatalytic applications
Gustav Plesch et al.
MATERIALS LETTERS (2009)
Effects of volume fraction of SiC particles on mechanical properties of SiC/Al composites
Song Min
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2009)
Mechanical behavior of SiC foam-SIC particles/Al hybrid composites
Zhao Long-zhi et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2009)
Freeze-casting of porous ceramics: A review of current achievements and issues
Sylvain Deville
ADVANCED ENGINEERING MATERIALS (2008)
Metal/ceramic composites from freeze-cast ceramic preforms: Domain structure and elastic properties
Siddhartha Roy et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2008)
NiAl(Si)/Al2O3 co-continuous composites by double reactive metal penetration into silica reforms
Diego Manfredi et al.
INTERMETALLICS (2008)
Fabrication, chemical etching, and compressive strength of porous biomimetic SiC for medical implants
Carmen Torres-Raya et al.
JOURNAL OF MATERIALS RESEARCH (2008)
Gas-filled microspheres as an expandable sacrificial template for direct casting of complex-shaped macroporous ceramics
Linnea Andersson et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2008)
Processing and properties of polysiloxane-derived porous silicon carbide ceramics using hollow microspheres as templates
Jung-Hye Eom et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2008)
Microstructural development in porous β-Si3N4 ceramics prepared with low volume RE2O3-MgO-(CaO) additions (RE = La, Nd, Y, Yb)
Kevin P. Plucknett et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Tribological properties of high temperature self-lubrication metal ceramics with an interpenetrating network
Yanjun Wang et al.
WEAR (2008)
Synthesis of porous biomorphic α/β-Si3N4 composite from sea sponge
C. R. Rambo et al.
JOURNAL OF POROUS MATERIALS (2008)
Thermal expansion of a novel hybrid SiC foam-SiC particles-Al composites
L. Z. Zhao et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2007)
Co-continuous composites for high-temperature applications
Eduardo del Rio et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Effect of Mg and Si in the aluminum on the thermo-mechanical properties of pressureless infiltrated SiCp/Al composites
Shubin Ren et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2007)
Pressureless sintering of α-Si3N4 porous ceramics using a H3PO4 pore-forming agent
Fei Chen et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2007)
Fabrication of mullite ceramics with ultrahigh porosity by gel freeze drying
Shuqiang Ding et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2007)
Synthesis of an Al2O3/Al co-continuous composite by reactive melt infiltration
C. M. L. Wu et al.
MATERIALS CHARACTERIZATION (2007)
Ice-templated porous alumina structures
Sylvain Deville et al.
ACTA MATERIALIA (2007)
A numerical study on the coefficients of thermal expansion of fiber reinforced composite materials
Z. Haktan Karadeniz et al.
COMPOSITE STRUCTURES (2007)
Effects of carbon source on microstructural evolution and sintering behavior of porous silicon nitride ceramics
Shao-Yun Shan et al.
SCRIPTA MATERIALIA (2007)
Highly aligned porous silicon carbide ceramics by freezing Polycarbosilane/Camphene solution
Byung-Ho Yoon et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2007)
Gas permeability and mechanical properties of porous alumina ceramics with unidirectionally aligned pores
Toshihiro Isobe et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2007)
Preparation and properties of porous alumina ceramics with uni-directionally oriented pores by extrusion method using a plastic substance as a pore former
Toshihiro Isobe et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2007)
Fabrication of mullite-bonded porous silicon carbide ceramics by in situ reaction bonding
Shuqiang Ding et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2007)
Fabrication of continuous carbon fiber-reinforced aluminum-magnesium alloy composite wires using ultrasonic infiltration method
Tadashi Matsunaga et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
Composites by aluminum infiltration of porous silicon carbide derived from wood precursors
T. E. Wilkes et al.
SCRIPTA MATERIALIA (2006)
High cycle fatigue study of metal-ceramic co-continuous composites
Matteo Pavese et al.
SCRIPTA MATERIALIA (2006)
Cellular porous SiC ceramics derived from Indian dicotyledonous woods and their application potential as hot gas filtration materials
D. Mallick et al.
ADVANCES IN APPLIED CERAMICS (2006)
Microstructure and mechanical properties of TiB2/(Cu, Ni) interpenetrating phase composites
Xinghong Zhang et al.
SCRIPTA MATERIALIA (2006)
Fabrication of 3D-SiC network reinforced aluminum-matrix composites by pressureless infiltration
Jichun Chen et al.
MATERIALS LETTERS (2006)
Modeling of liquid metal infiltration of porous fiber preform during squeeze casting
V Sampath et al.
MATERIALS AND MANUFACTURING PROCESSES (2006)
Interpenetrating microstructure and properties of Si3N4/Al-Mg composites fabricated by pressureless infiltration
Shouren Wang et al.
APPLIED COMPOSITE MATERIALS (2006)
Preparation of C4 ceramic/metal composites by reactive metal penetration of commercial ceramics
M Pavese et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2006)
Preparation and properties of porous alumina ceramics with oriented cylindrical pores produced by an extrusion method
T Isobe et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2006)
Application of fused deposition in controlled microstructure metal-ceramic composites
Amit Bandyopadhyay et al.
RAPID PROTOTYPING JOURNAL (2006)
Properties of alumina particulate reinforced aluminum alloy produced by pressure die casting
H Sevik et al.
MATERIALS & DESIGN (2006)
Fabrication of metal matrix composites by a high-pressure centrifugal infiltration process
J Wannasin et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2005)
Aligned porous materials by directional freezing of solutions in liquid CO2
HF Zhang et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2005)
Thermal properties of a high volume fraction SiC particle-reinforced pure aluminum composite
Q Zhang et al.
PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE (2005)
Synthesis of porous Si3N4 ceramics with rod-shaped pore structure
HF Yang et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2005)
Al-Al2O3 composites with interpenetrating network structures:: Composite modulus estimation
RJ Moon et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2005)
Effect of the reinforcement volume fraction on the dry sliding wear behaviour of Al-10Si/SiCp composites produced by vacuum infiltration technique
F Gul et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2004)
Fracture in metal-ceramic composites
P Agrawal et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2004)
Reactive processing of environmentally conscious, biomorphic ceramics from natural wood precursors
M Singh et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2004)
Preparation of interpenetrating ceramic-metal composites
A Mattern et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2004)
Effect of reinforcement connectivity on the elasto-plastic behavior of aluminum composites containing sub-micron alumina particles
M Kouzeli et al.
ACTA MATERIALIA (2003)
Effect of clustering on the mechanical properties of SiC particulate-reinforced aluminum alloy 2024 metal matrix composites
SJ Hong et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
The tensile response and fracture behavior of 2009 aluminum alloy metal matrix composite
TS Srivatsan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Room and high temperature tensile tests on the AA6061/10vol.%Al2O3p and AA7005/20vol.%Al2O3P composites
L Ceschini et al.
MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK (2003)
Fabrication and characterisation of porous silicon nitride ceramics using Yb2O3 as sintering additive
JF Yang et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2003)
Alumina-aluminum interpenetrating-phase composites with three-dimensional periodic architecture
CS Marchi et al.
SCRIPTA MATERIALIA (2003)
Production and properties of SiCp-reinforced aluminium alloy composites
Y Sahin et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2003)
Squeeze casting of SiCp/Al-alloy composites with various contents of reinforcements
LG Chen et al.
JOURNAL OF MATERIALS RESEARCH (2002)
Processing of mullite-aluminum composites
R Soundararajan et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2001)
High-surface-area alumina ceramics fabricated by the decomposition of Al(OH)3
ZY Deng et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2001)
Optimum conditions for pressureless infiltration of SiCp preforms by aluminum alloys
MI Pech-Canul et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2000)
The structure of ceramic foams produced using polymeric precursors
MR Nangrejo et al.
JOURNAL OF MATERIALS SCIENCE LETTERS (2000)
Influence of porosity on fatigue resistance of cast SiC particulate-reinforced Al-Si alloy composite
CS Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)
Deformation and fracture of a particle-reinforced aluminum alloy composite: Part II. Modeling
BS Majumdar et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2000)
The effect of processing on the mechanical properties and interfacial strength of aluminium/TiC MMCs
AR Kennedy et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2000)
Share Paper
