Related references
Note: Only part of the references are listed.Investigations on three-dimensional pore-structure in cementitious materials using metal centrifugation porosimetry and simulation
Rusheng Qian et al.
MATERIALS LETTERS (2021)
Visualized tracing of capillary absorption process in cementitious material based on X ray computed tomography
Shuxian Hong et al.
CEMENT & CONCRETE COMPOSITES (2020)
Thinner fillers, coarser pores? A comparative study of the pore structure alterations of cement composites by graphene oxides and graphene nanoplatelets
Jiyang Wang et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)
Pore connectivity characterization of shale using integrated wood's metal impregnation, microscopy, tomography, tracer mapping and porosimetry
Jianhua Zhao et al.
FUEL (2020)
Comparison of Mercury Intrusion Porosimetry and multi-scale X-ray CT on characterizing the microstructure of heat-treated cement mortar
Shanbin Xue et al.
MATERIALS CHARACTERIZATION (2020)
X-Ray computed tomography and traditional analysis of a capillary absorption test in cement pastes
Carmen Andrade et al.
CEMENT & CONCRETE COMPOSITES (2020)
Visualization and quantification of pore structure of oil-well cement slurry in liquid-solid transition stage using high-resolution computed tomography
Kaiqiang Liu et al.
CEMENT & CONCRETE COMPOSITES (2020)
Reassessment of mercury intrusion porosimetry for characterizing the pore structure of cement-based porous materials by monitoring the mercury entrapments with X-ray computed tomography
Qiang Zeng et al.
CEMENT & CONCRETE COMPOSITES (2020)
Experimental study on Katz-Thompson model for concrete materials and determination of K-T constant
Xinchun Guan et al.
MAGAZINE OF CONCRETE RESEARCH (2019)
Mesoscale pore structure of a high-performance concrete by coupling focused ion beam/scanning electron microscopy and small angle X-ray scattering
Sebastien Brisard et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2019)
Tracing mercury entrapment in porous cement paste after mercury intrusion test by X-ray computed tomography and implications for pore structure characterization
Qiang Zeng et al.
MATERIALS CHARACTERIZATION (2019)
Visual & quantitative identification of cracking in mortar subjected to loads it using X-ray computed tomography method
Shuxian Hong et al.
CEMENT & CONCRETE COMPOSITES (2019)
Evaluation of drying methods by nitrogen adsorption
Zhidong Zhang et al.
CEMENT AND CONCRETE RESEARCH (2019)
Capillary imbibition of ethanol in cement paste traced by X-ray computed tomography with CsCl-enhancing technique
Qiang Zeng et al.
CHEMICAL PHYSICS LETTERS (2019)
Correlations between air permeability coefficients and pore structure indicators of cementitious materials
Yuya Sakai
CONSTRUCTION AND BUILDING MATERIALS (2019)
Pore Structure Damages in Cement-Based Materials by Mercury Intrusion: A Non-Destructive Assessment by X-Ray Computed Tomography
Xiaohu Wang et al.
MATERIALS (2019)
Advances in characterizing and understanding the microstructure of cementitious materials
Paulo J. M. Monteiro et al.
CEMENT AND CONCRETE RESEARCH (2019)
Oven dying kinetics and status of cement-based porous materials for in-lab microstructure investigation
Qi Zhang et al.
ADVANCES IN CEMENT RESEARCH (2018)
Pore-size resolved water vapor adsorption kinetics of white cement mortars as viewed from proton NMR relaxation
Chunsheng Zhou et al.
CEMENT AND CONCRETE RESEARCH (2018)
Study on water and chloride transport in cracked mortar using X-ray CT, gravimetric method and natural immersion method
Lin Yang et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Thermally insulating lightweight cement-based composites incorporating glass beads and nano-silica aerogels for sustainably energy-saving buildings
Qiang Zeng et al.
ENERGY AND BUILDINGS (2018)
USING MULTICYCLE MERCURY INTRUSION POROSIMETRY TO INVESTIGATE HYSTERESIS PHENOMENON OF DIFFERENT POROUS MEDIA
Zhiye Gao et al.
JOURNAL OF POROUS MEDIA (2018)
Quantitative characterization of three-dimensional pore structure in hardened cement paste using X-ray microtomography combined with centrifuge driven metal alloy intrusion
Rusheng Qian et al.
MATERIALS CHARACTERIZATION (2018)
Pore Connectivity Between Organic and Inorganic Matter in Shale: Network Modeling of Mercury Capillary Pressure
Ali Afsharpoor et al.
TRANSPORT IN POROUS MEDIA (2018)
Application of mercury injection capillary pressure to mudrocks: Conformance and compression corrections
Sheng Peng et al.
MARINE AND PETROLEUM GEOLOGY (2017)
Why permeability to water is anomalously lower than that to many other fluids for cement-based material?
Chunsheng Zhou et al.
CEMENT AND CONCRETE RESEARCH (2017)
A reassessment of mercury intrusion porosimetry by comparison with 1H NMR relaxometry
A. C. A. Muller et al.
CEMENT AND CONCRETE RESEARCH (2017)
Pore structure of cement pastes through NAD and MIP analysis
Qiang Zeng et al.
ADVANCES IN CEMENT RESEARCH (2016)
Confinement Correction to Mercury Intrusion Capillary Pressure of Shale Nanopores
Sen Wang et al.
SCIENTIFIC REPORTS (2016)
A new scheme for analysis of pore characteristics using centrifuge driven non-toxic metal intrusion
Shu Jian Chen et al.
GEOMECHANICS AND GEOPHYSICS FOR GEO-ENERGY AND GEO-RESOURCES (2016)
Mass Density and Water Content of Saturated Never-Dried Calcium Silicate Hydrates
Julio C. da Silva et al.
LANGMUIR (2015)
Evaluation of mass transfer resistance of concrete based on representative pore size of permeation resistance
Yuya Sakai et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Mercury intrusion porosimetry in concrete technology: tips in measurement, pore structure parameter acquisition and application
Hongyan Ma
JOURNAL OF POROUS MATERIALS (2014)
Water Removal by Freeze-Drying of Hardened Cement Paste
Qiang Zeng et al.
DRYING TECHNOLOGY (2013)
Mercury porosimetry as a tool for improving quality of micro-CT images in low porosity carbonate rocks
Nicoletta Fusi et al.
ENGINEERING GEOLOGY (2013)
Analysis of pore structure, contact angle and pore entrapment of blended cement pastes from mercury porosimetry data
Qiang Zeng et al.
CEMENT & CONCRETE COMPOSITES (2012)
Pore structure characterization of cement pastes blended with high-volume fly-ash
Qiang Zeng et al.
CEMENT AND CONCRETE RESEARCH (2012)
Improving the interpretation of mercury porosimetry data using computerised X-ray tomography and mean-field DFT
Sean P. Rigby et al.
CHEMICAL ENGINEERING SCIENCE (2011)
Pore space analysis of cement-based materials by combined Nitrogen sorption - Wood's metal impregnation and multi-cycle mercury intrusion
Josef Kaufmann
CEMENT & CONCRETE COMPOSITES (2010)
Characterization of pore structure in cement-based materials using pressurization-depressurization cycling mercury intrusion porosimetry (PDC-MIP)
Jian Zhou et al.
CEMENT AND CONCRETE RESEARCH (2010)
Analysis of cement-bonded materials by multi-cycle mercury intrusion and nitrogen sorption
Josef Kaufmann et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2009)
Using pore parameters to estimate permeability or conductivity of concrete
M. R. Nokken et al.
MATERIALS AND STRUCTURES (2008)
Mercury porosimetry in mesoporous glasses: A comparison of experiments with results from a molecular model
F. Porcheron et al.
LANGMUIR (2007)
Studies of the entrapment of non-wetting fluid within nanoporous media using a synergistic combination of MRI and micro-computed X-ray tomography
Sean P. Rigby et al.
CHEMICAL ENGINEERING SCIENCE (2006)
Dynamic aspects of mercury porosimetry: A lattice model study
F Porcheron et al.
LANGMUIR (2005)
The influence of mercury contact angle, surface tension, and retraction mechanism on the interpretation of mercury porosimetry data
SP Rigby et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2002)
Ink-bottle effect in mercury intrusion porosimetry of cement-based materials
F Moro et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2002)
Mercury porosimetry - An inappropriate method for the measurement of pore size distributions in cement-based materials
S Diamond
CEMENT AND CONCRETE RESEARCH (2000)
Detailed tabulation of atomic form factors, photoelectric absorption and scattering cross section, and mass attenuation coefficients in the vicinity of absorption edges in the soft X-ray (Z=30-36, Z=60-89, E=0.1 keV-10 keV), addressing convergence issues of earlier work
CT Chantler
JOURNAL OF PHYSICAL AND CHEMICAL REFERENCE DATA (2000)