Related references
Note: Only part of the references are listed.Recent Developments in Cellulose Nanomaterial Composites
Caitlyn M. Clarkson et al.
ADVANCED MATERIALS (2021)
Crystallization kinetics and morphology of small concentrations of cellulose nanofibrils (CNFs) and cellulose nanocrystals (CNCs) melt-compounded into poly(lactic acid) (PLA) with plasticizer
Caitlyn M. Clarkson et al.
POLYMER (2020)
Nanocellulose Production by Twin-Screw Extrusion: Simulation of the Screw Profile To Increase the Productivity
Fleur Rol et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)
Hierarchical Assembly of Nanocellulose into Filaments by Flow-Assisted Alignment and Interfacial Complexation: Conquering the Conflicts between Strength and Toughness
Yuhua Cai et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Continuous Processing of Cellulose Nanofibril Sheets Through Conventional Single-Screw Extrusion
Sami M. El Awad Azrak et al.
ACS APPLIED POLYMER MATERIALS (2020)
Effect of Wet Spinning and Stretching to Enhance Mechanical Properties of Cellulose Nanofiber Filament
Hyun Chan Kim et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2019)
Wet-Stacking Lamination of Multilayer Mechanically Fibrillated Cellulose Nanofibril (CNF) Sheets with Increased Mechanical Performance for Use in High-Strength and Lightweight Structural and Packaging Applications
Sami M. El Awad Azrak et al.
ACS APPLIED POLYMER MATERIALS (2019)
Plant-based materials and transitioning to a circular economy
Randal Shogren et al.
SUSTAINABLE PRODUCTION AND CONSUMPTION (2019)
Melt Spinning of Cellulose Nanofibril/Polylactic Acid (CNF/PLA) Composite Fibers For High Stiffness
Caitlyn M. Clarkson et al.
ACS APPLIED POLYMER MATERIALS (2019)
Comparative study of cellulosic components isolated from different Eucalyptus species
Isabel Carrillo et al.
CELLULOSE (2018)
Wet-peel: a tool for comparing wet-strength resins
Dong Yang et al.
NORDIC PULP & PAPER RESEARCH JOURNAL (2018)
Improved dispersibility of once-dried cellulose nanofibers in the presence of glycerol
Carl Moser et al.
NORDIC PULP & PAPER RESEARCH JOURNAL (2018)
Isolation and Characterization of Cellulose Nanocrystals from Rejected Fibers Originated in the Kraft Pulping Process
Maria Graciela Aguayo et al.
POLYMERS (2018)
Recent Trends in Green and Sustainable Chemistry & Waste Valorisation: Rethinking Plastics in a circular economy
Guneet Kaur et al.
CURRENT OPINION IN GREEN AND SUSTAINABLE CHEMISTRY (2018)
Cellulose micro- and nanofibrils (CMNF) manufacturing - financial and risk assessment
Camilla Abbati de Assis et al.
BIOFUELS BIOPRODUCTS & BIOREFINING-BIOFPR (2018)
Aqueous morpholine pre-treatment in cellulose nanofibril (CNF) production: comparison with carboxymethylation and TEMPO oxidisation pre-treatment methods
Amaka J. Onyianta et al.
CELLULOSE (2018)
Spinning of Cellulose Nanofibrils into Filaments: A Review
Meri J. Lundahl et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2017)
High wet-strength, thermally stable and transparent TEMPO-oxidized cellulose nanofibril film via cross-linking with poly-amide epichlorohydrin resin
Weisheng Yang et al.
RSC ADVANCES (2017)
Cellulose long fibers fabricated from cellulose nanofibers and its strong and tough characteristics
Abdullahil Kafy et al.
SCIENTIFIC REPORTS (2017)
A new quality index for benchmarking of different cellulose nanofibrils
Johanna Desmaisons et al.
CARBOHYDRATE POLYMERS (2017)
Cellulose nanofiber/carboxymethyl cellulose blends as an efficient coating to improve the structure and barrier properties of paperboard
S. M. Mazhari Mousavi et al.
CELLULOSE (2017)
Dual Mechanism of Dry Strength Improvement of Cellulose Nanofibril Films by Polyamide-epichlorohydrin Resin Cross-Linking
Sudhir Sharma et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2016)
Overview of Cellulose Nanomaterials, Their Capabilities and Applications
Robert J. Moon et al.
JOM (2016)
Self-assembling of TEMPO Oxidized Cellulose Nanofibrils As Affected by Protonation of Surface Carboxyls and Drying Methods
Feng Jiang et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2016)
Use of polyurea from urea for coating of urea granules
Panfang Lu et al.
SPRINGERPLUS (2016)
Toward Industrially Feasible Methods for Following the Process of Manufacturing Cellulose Nanofibers
Carl Moser et al.
BIORESOURCES (2015)
Carboxymethylcellulose (CMC) as a model compound of cellulose fibers and polyamideamine epichlorohydrin (PAE)-CMC interactions as a model of PAE-fibers interactions of PAE-based wet strength papers
Eder J. Siqueira et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2015)
Effects of process variables on the yield stress of rheologically modified biomass
Joseph R. Samaniuk et al.
RHEOLOGICA ACTA (2015)
Water redispersible cellulose nanofibrils adsorbed with carboxymethyl cellulose
Nuria Butchosa et al.
CELLULOSE (2014)
Hydrodynamic alignment and assembly of nanofibrils resulting in strong cellulose filaments
Karl M. O. Hakansson et al.
NATURE COMMUNICATIONS (2014)
Synthesis, characterization and electrospinning of new thermoplastic carboxymethyl cellulose (TCMC)
Xiaoyan Lin et al.
CHEMICAL ENGINEERING JOURNAL (2013)
Synthesis of Azetidinium-Functionalized Polymers Using a Piperazine Based Coupler
Subrata Chattopadhyay et al.
MACROMOLECULES (2013)
Cellulose Nanofibrils: From Strong Materials to Bioactive Surfaces
Yanxia Zhang et al.
JOURNAL OF RENEWABLE MATERIALS (2013)
Rheological modification of corn stover biomass at high solids concentrations
Joseph R. Samaniuk et al.
JOURNAL OF RHEOLOGY (2012)
Zeta Potential Time Dependence Reveals the Swelling Dynamics of Wood Cellulose Nanofibrils
Kojiro Uetani et al.
LANGMUIR (2012)
Monitoring Wood Degradation during Weathering by Cellulose Crystallinity
Francesca Lionetto et al.
MATERIALS (2012)
Cellulose nanomaterials review: structure, properties and nanocomposites
Robert J. Moon et al.
CHEMICAL SOCIETY REVIEWS (2011)
Quartz Crystal Microbalance with Dissipation Monitoring and Surface Plasmon Resonance Studies of Carboxymethyl Cellulose Adsorption onto Regenerated Cellulose Surfaces
Zelin Liu et al.
LANGMUIR (2011)
Fast Preparation Procedure for Large, Flat Cellulose and Cellulose/Inorganic Nanopaper Structures
Houssine Sehaqui et al.
BIOMACROMOLECULES (2010)
Cellulose nanowhiskers from coconut husk fibers: Effect of preparation conditions on their thermal and morphological behavior
M. F. Rosa et al.
CARBOHYDRATE POLYMERS (2010)
Preparation and characterization of water-redispersible nanofibrillated cellulose in powder form
Ch. Eyholzer et al.
CELLULOSE (2010)
The impact of esterification reactions on physical properties of cellulose thin films
Yvonne Mueller et al.
SOFT MATTER (2010)
Grafting onto microfibrils of native cellulose
Elsa Lasseuguette
CELLULOSE (2008)
Esterification of carboxylic acids on cellulosic material. Solid state reactions
Anna Pantze et al.
HOLZFORSCHUNG (2008)
In situ particle film ATR FTIR spectroscopy of carboxymethyl cellulose adsorption on talc: Binding mechanism, pH effects, and adsorption kinetics
Linh T. Cuba-Chiem et al.
LANGMUIR (2008)
The mechanism of wet-strength development of cellulose sheets prepared with polyamideamine-epichlorohydrin (PAE) resin
Takao Obokata et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2007)
Crosslinking by polycarbodiimides
W. Posthumus et al.
PROGRESS IN ORGANIC COATINGS (2007)
The effects of CMC attachment onto industrial and laboratory-cooked pulps
Elisabeth Duker et al.
NORDIC PULP & PAPER RESEARCH JOURNAL (2007)
Polymer interdiffusion vs cross-linking in carboxylic acid-carbodiimide latex films. Effect of annealing temperature, reactive group concentration, and carbodiimide substituent
HH Pham et al.
MACROMOLECULES (2006)
Polycarbodiimide crosslinkers
LCJ Hesselmans et al.
PROGRESS IN ORGANIC COATINGS (2006)
Some ways to decrease fibre suspension flocculation and improve sheet formation
HW Yan et al.
NORDIC PULP & PAPER RESEARCH JOURNAL (2006)
Hornification - its origin and interpretation in wood pulps
JMBF Diniz et al.
WOOD SCIENCE AND TECHNOLOGY (2004)
Effects of processing on zeta potential and cationic demand of kraft pulps
NK Bhardwaj et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2004)
Structural analysis of photodegraded wood by means of FTIR spectroscopy
X Colom et al.
POLYMER DEGRADATION AND STABILITY (2003)
Properties of fiber flocs with frictional and attractive interfiber forces
CF Schmid et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2000)