Related references
Note: Only part of the references are listed.A review of surface functionalisation of diamond for thermionic emission applications
Michael C. James et al.
CARBON (2021)
Nanosecond pulsed laser-processing of CVD diamond
F. Mouhamadali et al.
OPTICS AND LASERS IN ENGINEERING (2020)
Electron-Induced State Conversion in Diamond NV Centers Measured with Pump-Probe Cathodoluminescence Spectroscopy
Magdalena Sola-Garcia et al.
ACS PHOTONICS (2020)
Theoretical fundamentals of short pulse laser-metal interaction: A review
Xinxin Li et al.
NANOTECHNOLOGY AND PRECISION ENGINEERING (2020)
Measuring the Local Thickness of Laser-Induced Graphitized Layer on Diamond Surface by Raman Spectroscopy
Maxim S. Komlenok et al.
PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS (2019)
Diamond slicing using ultrashort laser-induced graphitization and additional nanosecond laser illumination
Haruna Hirai et al.
DIAMOND AND RELATED MATERIALS (2019)
Process research on micro-machining diamond microgroove by femtosecond laser
Jian Dou et al.
INTEGRATED FERROELECTRICS (2019)
Surface chemical modification of CVD diamond films by laser irradiation
Da-wei Zhang et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2019)
The art of designing carbon allotropes
Run-Sen Zhang et al.
FRONTIERS OF PHYSICS (2019)
Studies of Black Diamond as an antibacterial surface for Gram Negative bacteria: the interplay between chemical and mechanical bactericidal activity
O. Dunseath et al.
SCIENTIFIC REPORTS (2019)
Direct femtosecond-laser writing of optical-range nanoscale metagratings/metacouplers on diamond surfaces
S. Kudryashov et al.
APPLIED PHYSICS LETTERS (2019)
Fabrication of CVD diamond micro-milling tool by hybrid machining of laser-induced graphitization and precision grinding
Yinfei Yang et al.
CERAMICS INTERNATIONAL (2019)
Processing of polycrystalline diamond surface by IR laser pulses without interior damage
Taras V. Kononenko et al.
OPTICS AND LASER TECHNOLOGY (2019)
Effect of beam shape and spatial energy distribution on weld bead geometry in conduction welding
W. A. Ayoola et al.
OPTICS AND LASER TECHNOLOGY (2019)
Research on the mechanism of micromachining of CVD diamond by femtosecond laser
Yu Sun et al.
FERROELECTRICS (2019)
Phase transition, structural defects and stress development in superficial and buried regions of femtosecond laser modified diamond
M. C. Rossi et al.
OPTICAL MATERIALS (2019)
Study on Femtosecond Laser Processing Characteristics of Nano-Crystalline CVD Diamond Coating
Chao Wei et al.
APPLIED SCIENCES-BASEL (2019)
Precision grinding of silicon nitride ceramic with laser macro-structured diamond wheels
Xiaohong Zhang et al.
OPTICS AND LASER TECHNOLOGY (2019)
Electrons dynamics control by shaping femtosecond laser pulses in micro/nanofabrication: modeling, method, measurement and application
Lan Jiang et al.
LIGHT-SCIENCE & APPLICATIONS (2018)
Laser machining micro-structures on diamond surface with a sub-nanosecond pulsed laser
Mingtao Wu et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2018)
Ultrafast photoionization and excitation of surface-plasmon-polaritons on diamond surfaces
Tzveta Apostolova et al.
APPLIED SURFACE SCIENCE (2018)
Investigation of the microstructure change due to phase transition in nanosecond pulsed laser processing of diamond
G. B. J. Cadot et al.
CARBON (2018)
The influence of the ionization regime on femtosecond laser beam machining mono-crystalline diamond
Mingtao Wu et al.
OPTICS AND LASER TECHNOLOGY (2018)
Micro-channels machining on polycrystalline diamond by nanosecond laser
Youqiang Xing et al.
OPTICS AND LASER TECHNOLOGY (2018)
The influence of the focus position on laser machining and laser micro-structuring monocrystalline diamond surface
Mingtao Wu et al.
OPTICS AND LASERS IN ENGINEERING (2018)
Microgrooving of a single-crystal diamond tool using a picosecond pulsed laser and some cutting tests
Nozomi Takayama et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2018)
Femtosecond laser written diamond waveguides: A step towards integrated photonics in the far infrared
Vibhav Bharadwaj et al.
OPTICAL MATERIALS (2018)
Laser-Induced Periodic Surface Structures-A Scientific Evergreen
Joern Bonse et al.
IEEE JOURNAL OF SELECTED TOPICS IN QUANTUM ELECTRONICS (2017)
Mechanisms of micro-groove formation on single-crystal diamond by a nanosecond pulsed laser
Nozomi Takayama et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Visible to Infrared Diamond Photonics Enabled by Focused Femtosecond Laser Pulses
Belen Sotillo et al.
MICROMACHINES (2017)
Laser Irradiation Responses of a Single-Crystal Diamond Produced by Different Crystal Growth Methods
Nozomi Takayama et al.
APPLIED SCIENCES-BASEL (2017)
Graphite distributed electrodes for diamond-based photon-enhanced thermionic emission solar cells
Marco Girolami et al.
CARBON (2017)
Fabrication of polycrystalline diamond refractive X-ray lens by femtosecond laser processing
T. V. Kononenko et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2016)
Black diamond for solar energy conversion
Paolo Calvani et al.
CARBON (2016)
A study on machining of binder-less polycrystalline diamond by femtosecond pulsed laser for fabrication of micro milling tools
Yoshinori Ogawa et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2016)
The effect of hydrogen and acetylene mixing ratios on the surface, mechanical and biocompatible properties of diamond-like carbon films
Chehung Wei et al.
DIAMOND AND RELATED MATERIALS (2016)
Diamond photonics platform enabled by femtosecond laser writing
Belen Sotillo et al.
SCIENTIFIC REPORTS (2016)
Polarisation-dependent generation of fs-laser induced periodic surface structures
Stephan Graef' et al.
APPLIED SURFACE SCIENCE (2015)
VISIBLE ABSORPTION SPECTRA OF COLORED DIAMONDS
James E. Shigley et al.
GEMS & GEMOLOGY (2015)
Loophole-free Bell inequality violation using electron spins separated by 1.3 kilometres
B. Hensen et al.
NATURE (2015)
Diamond turning of diffractive microstructures
Axel Meier
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2015)
Carbon photonics
V. I. Konov
QUANTUM ELECTRONICS (2015)
The laser micro-machining system for diamond anvil cell experiments and general precision machining applications at the High Pressure Collaborative Access Team
Rostislav Hrubiak et al.
REVIEW OF SCIENTIFIC INSTRUMENTS (2015)
Large-acceptance diamond planar refractive lenses manufactured by laser cutting
Maxim Polikarpov et al.
JOURNAL OF SYNCHROTRON RADIATION (2015)
Photoinduced graphitization of diamond
V. V. Kononenko et al.
LASER PHYSICS LETTERS (2015)
Optical properties of femtosecond laser-treated diamond
P. Calvani et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2014)
Precision grinding of optical glass with laser micro-structured coarse-grained diamond wheels
Bing Guo et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)
Nanotwinned diamond with unprecedented hardness and stability
Quan Huang et al.
NATURE (2014)
High-power, high-intensity laser propagation and interactions
Phillip Sprangle et al.
PHYSICS OF PLASMAS (2014)
Propagation and absorption of high-intensity femtosecond laser radiation in diamond
V. V. Kononenko et al.
QUANTUM ELECTRONICS (2014)
Micro-Cutting with Diamond Tool Micro-Patterned by Femtosecond Laser
Jaegu Kim et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2014)
Laser Roughing of PCD
Christian Brecher et al.
8TH INTERNATIONAL CONFERENCE ON LASER ASSISTED NET SHAPE ENGINEERING (LANE 2014) (2014)
High aspect ratio optical gratings in diamond
Pontus Forsberg et al.
DIAMOND AND RELATED MATERIALS (2013)
Micro/nanometric investigations of the effects of laser ablation in the generation of micro-tools from solid CVD diamond structures
P. W. Butler-Smith et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2013)
Laser processing of coarse grain polycrystalline diamond (PCD) cutting tool inserts using picosecond laser pulses
C. Dold et al.
LASERS IN MANUFACTURING (LIM 2013) (2013)
Powerful 67 fs Kerr-lens mode-locked prismless Yb:KGW oscillator
Haitao Zhao et al.
OPTICS EXPRESS (2013)
Finishing of polycrystalline diamond tools by combining laser ablation with grinding
Christian Brecher et al.
PRODUCTION ENGINEERING-RESEARCH AND DEVELOPMENT (2013)
Electrochemical Boron-Doped Diamond Film Microcells Micromachined with Femtosecond Laser: Application to the Determination of Water Framework Directive Metals
Amel Sbartai et al.
ANALYTICAL CHEMISTRY (2012)
Micromachining along a curve: Femtosecond laser micromachining of curved profiles in diamond and silicon using accelerating beams
A. Mathis et al.
APPLIED PHYSICS LETTERS (2012)
Analysis of femtosecond laser surface patterning on bulk single-crystalline diamond
Graham C. B. Lee et al.
JOURNAL OF EXPERIMENTAL NANOSCIENCE (2012)
Laser in micro and nanoprocessing of diamond materials
Vitaly I. Konov
LASER & PHOTONICS REVIEWS (2012)
Theory of the ground-state spin of the NV- center in diamond
M. W. Doherty et al.
PHYSICAL REVIEW B (2012)
Coupling of Nitrogen-Vacancy Centers to Photonic Crystal Cavities in Monocrystalline Diamond
Andrei Faraon et al.
PHYSICAL REVIEW LETTERS (2012)
The mechanical and strength properties of diamond
J. E. Field
REPORTS ON PROGRESS IN PHYSICS (2012)
Laser Prepared Cutting Tools
Wegener Konrad et al.
LASER ASSISTED NET SHAPE ENGINEERING 7 (LANE 2012) (2012)
Ultrashort Pulsed Laser Micromachining of Polycrystalline Diamond
Zengqiang Li et al.
ULTRA-PRECISION MACHINING TECHNOLOGIES (2012)
Formation of carbon nanofilms on diamond for all-carbon based temperature and chemical sensor application
Vivek Kumar et al.
CARBON (2011)
Laser nano-manufacturing - State of the art and challenges
Lin Li et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2011)
Ultrafast Changes in the Optical Properties of a Titanium Surface and Femtosecond Laser Writing of One-Dimensional Quasi-Periodic Nanogratings of Its Relief
E. V. Golosov et al.
JOURNAL OF EXPERIMENTAL AND THEORETICAL PHYSICS (2011)
A study on micro-hole machining of polycrystalline diamond by micro-electrical discharge machining
D. Wang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)
Medical applications of diamond particles & surfaces
Roger J. Narayan et al.
MATERIALS TODAY (2011)
Electric-field sensing using single diamond spins
F. Dolde et al.
NATURE PHYSICS (2011)
Near infrared optical materials from polymeric amorphous carbon synthesized by collisional plasma process
M. Rybachuk et al.
APPLIED PHYSICS LETTERS (2010)
High aspect ratio nanochannel machining using single shot femtosecond Bessel beams
M. K. Bhuyan et al.
APPLIED PHYSICS LETTERS (2010)
Fabrication technology for single-material MEMS using polycrystalline diamond
Zongliang Cao et al.
DIAMOND AND RELATED MATERIALS (2010)
Micro-/nanostructural investigation of laser-cut surfaces of single- and polycrystalline diamonds
Hiroaki Ohfuji et al.
DIAMOND AND RELATED MATERIALS (2010)
Bulk femtosecond laser marking of natural diamonds
A. A. Ionin et al.
LASER PHYSICS (2010)
On femtosecond micromachining of HPHT single-crystal diamond with direct laser writing using tight focusing
Othman H. Y. Zalloum et al.
OPTICS EXPRESS (2010)
Laser-induced refractive index changes in nanocrystalline diamond membranes
Jana Preclikova et al.
OPTICS LETTERS (2010)
An amplified femtosecond laser system for material micro-/nanostructuring with an integrated Raman microscope
Othman H. Y. Zalloum et al.
REVIEW OF SCIENTIFIC INSTRUMENTS (2010)
Micromachining and surface processing of the super-hard nano-polycrystalline diamond by three types of pulsed lasers
Takuo Okuchi et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2009)
Electronic states of trans-polyacetylene, poly(p-phenylene vinylene) and sp-hybridised carbon species in amorphous hydrogenated carbon probed by resonant Raman scattering
M. Rybachuk et al.
CARBON (2009)
Pulsed laser processing of nano-polycrystalline diamond: A comparative study with single crystal diamond
Shoko Odake et al.
DIAMOND AND RELATED MATERIALS (2009)
THE TYPE CLASSIFICATION SYSTEM OF DIAMONDS AND ITS IMPORTANCE IN GEMOLOGY
Christopher M. Breeding et al.
GEMS & GEMOLOGY (2009)
Abrasive waterjet cutting of polycrystalline diamond: A preliminary investigation
D. A. Axinte et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2009)
Femtosecond laser-induced formation of nanometer-width grooves on synthetic single-crystal diamond surfaces
Masataka Shinoda et al.
JOURNAL OF APPLIED PHYSICS (2009)
Mechanisms of ultrafast laser-induced deep-subwavelength gratings on graphite and diamond
Min Huang et al.
PHYSICAL REVIEW B (2009)
Resonant Raman scattering from polyacetylene and poly(p-phenylene vinylene) chains included into hydrogenated amorphous carbon
M. Rybachuk et al.
APPLIED PHYSICS LETTERS (2008)
Nanodiamond lateral field emitter devices on thick insulator substrates for reliable high power applications
K. Subramanian et al.
DIAMOND AND RELATED MATERIALS (2008)
Femtosecond pulsed laser deposition and optical properties of diamond-like amorphous carbon films embedded with sp-bonded carbon chains
Anming Hu et al.
DIAMOND AND RELATED MATERIALS (2008)
Laser beam machining - A review
Avanish Kumar Dubey et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2008)
Nanostructure and sp1/sp2 clustering in tetrahedral amorphous carbon thin films grown by femtosecond laser deposition
A. Hu et al.
JOURNAL OF LASER APPLICATIONS (2008)
Diamond as an electronic material
Chris J. H. Wort et al.
MATERIALS TODAY (2008)
Femtosecond laser micromachining in transparent materials
Rafael R. Gattass et al.
NATURE PHOTONICS (2008)
Microstructuring of diamond bulk by IR femtosecond laser pulses
T. V. Kononenko et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2008)
Fabrication of an ultra-nanocrystalline diamond-coated silicon wire array with enhanced field-emission performance
Yu-Fen Tzeng et al.
NANOTECHNOLOGY (2007)
Nanobuckling and x-ray photoelectron spectra of carbyne-rich tetrahedral carbon films deposited by femtosecond laser ablation at cryogenic temperatures
A. Hu et al.
JOURNAL OF APPLIED PHYSICS (2007)
Direct synthesis of sp-bonded carbon chains on graphite surface by femtosecond laser irradiation
A. Hu et al.
APPLIED PHYSICS LETTERS (2007)
Generation of multi-megabar pressure using nano-polycrystalline diamond anvils
Yuki Nakamoto et al.
JAPANESE JOURNAL OF APPLIED PHYSICS PART 2-LETTERS & EXPRESS LETTERS (2007)
Integration of optical waveguides and microfluidic channels both fabricated by femtosecond laser irradiation
Roberto Osellame et al.
APPLIED PHYSICS LETTERS (2007)
Characterization of laser processing of single-crystal natural diamonds using micro-Raman spectroscopic investigations
S. K. Sudheer et al.
JOURNAL OF RAMAN SPECTROSCOPY (2007)
Thermionic emission from surface-terminated nanocrystalline diamond
Vance S. Robinson et al.
DIAMOND AND RELATED MATERIALS (2006)
Characterization of amorphous and nanocrystalline carbon films
PK Chu et al.
MATERIALS CHEMISTRY AND PHYSICS (2006)
The observation of sp2 fraction disorder using dual wavelength Raman spectroscopy in a-C:H films fabricated using an open inductively coupled plasma reactor
Maksym Rybachuk et al.
DIAMOND AND RELATED MATERIALS (2006)
High-density near-field readout using diamond solid immersion lens
M Shinoda et al.
JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS BRIEF COMMUNICATIONS & REVIEW PAPERS (2006)
Effects of pulse duration in laser processing of diamond-like carbon films
TV Kononenko et al.
DIAMOND AND RELATED MATERIALS (2005)
Initial temporal and spatial changes of the refractive index induced by focused femtosecond pulsed laser irradiation inside a glass
M Sakakura et al.
PHYSICAL REVIEW B (2005)
Time scale effects in laser material removal: a review
YL Yao et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2005)
Powerful red-green-blue laser source pumped with a mode-locked thin,disk laser
F Brunner et al.
OPTICS LETTERS (2004)
Micro machining glass with polycrystalline diamond tools shaped by micro electro discharge machining
CJ Morgan et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2004)
Characteristics of carbon films prepared by plasma-based ion implantation
J Liao et al.
CARBON (2004)
Technology development of 3D detectors for medical imaging
G Pellegrini et al.
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT (2003)
Plasma plume characteristics and properties of pulsed laser deposited diamond-like carbon films
J Haverkamp et al.
JOURNAL OF APPLIED PHYSICS (2003)
60-W average power in 810-fs pulses from a thin-disk Yb:YAG laser
E Innerhofer et al.
OPTICS LETTERS (2003)
Flakes of natural carbyne in a diamond mine
XY Chuan et al.
CARBON (2003)
Inducing and probing non-thermal transitions in semiconductors using femtosecond laser pulses
SK Sundaram et al.
NATURE MATERIALS (2002)
Femtosecond ablation of ultrahard materials
G Dumitru et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2002)
Dynamics of femtosecond laser-induced breakdown in water from femtoseconds to microseconds
CB Schaffer et al.
OPTICS EXPRESS (2002)
Study on PCD machining
PL Tso et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2002)
Time-dependent energy absorption changes during ultrafast lattice deformation
HO Jeschke et al.
JOURNAL OF APPLIED PHYSICS (2002)
Laser-induced breakdown and damage in bulk transparent materials induced by tightly focused femtosecond laser pulses
CB Schaffer et al.
MEASUREMENT SCIENCE AND TECHNOLOGY (2001)
Resonant Raman spectroscopy of disordered, amorphous, and diamondlike carbon
AC Ferrari et al.
PHYSICAL REVIEW B (2001)
Temperature dependence of the refractive index of diamond up to 925 K
T Ruf et al.
PHYSICAL REVIEW B (2000)
Laser-induced graphitization on a diamond (111) surface
CZ Wang et al.
PHYSICAL REVIEW LETTERS (2000)
Intense few-cycle laser fields: Frontiers of nonlinear optics
T Brabec et al.
REVIEWS OF MODERN PHYSICS (2000)
Precision micromachining of CVD diamond films
JK Park et al.
DIAMOND AND RELATED MATERIALS (2000)
Preparation of carbon nanofibers by hot filament-assisted sputtering
Y Matsumoto et al.
MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY (2000)
Share Paper
