4.6 Article

Dynamic response and fracture evolution of marble specimens containing rectangular cavities subjected to dynamic loading

Related references

Note: Only part of the references are listed.
Article Mechanics

Failure and mechanical behavior of transversely isotropic rock under compression-shear tests: Laboratory testing and numerical simulation

Ri-hong Cao et al.

Summary: Experimental and numerical tests were conducted to investigate the fracture characteristics of transversely isotropic rock under planar shear fracture loading, focusing on the influence of bedding plane inclination, strength, and spacing on fracture loads and patterns. The results showed that inclination angles, strength, and spacing of the bedding planes significantly affect the fracture load and pattern, with higher bedding plane strength resulting in higher fracture loads and different fracture patterns.

ENGINEERING FRACTURE MECHANICS (2021)

Article Engineering, Mechanical

Analytical stress solution and mechanical properties for rock mass containing a hole with complex shape

Lihai Tan et al.

Summary: This study utilized complex variable theory to analyze stress distribution for rock mass with complex-shaped holes, and investigated parameters using mapping function calculation. The research shows that hole shape primarily affects rock stability through its influence on stress concentration.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2021)

Article Engineering, Mechanical

Inhomogeneous mechanical behaviour of concrete subjected to monotonic and cyclic loading

Zhengyang Song et al.

INTERNATIONAL JOURNAL OF FATIGUE (2020)

Article Construction & Building Technology

Continuum analysis of the structurally controlled displacements for large-scale underground caverns in bedded rock masses

Ang Li et al.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2020)

Article Engineering, Geological

Mechanical and Volumetric Fracturing Behaviour of Three-Dimensional Printing Rock-like Samples Under Dynamic Loading

Tao Zhou et al.

ROCK MECHANICS AND ROCK ENGINEERING (2020)

Article Engineering, Geological

Experimental evaluation on rock failure mechanism with combined flaws in a connected geometry under coupled static-dynamic loads

Diyuan Li et al.

SOIL DYNAMICS AND EARTHQUAKE ENGINEERING (2020)

Article Mechanics

Fracture behavior and damage mechanisms of sandstone subjected to wetting -drying cycles

Xin Cai et al.

ENGINEERING FRACTURE MECHANICS (2020)

Article Engineering, Geological

Water-induced variations in dynamic behavior and failure characteristics of sandstone subjected to simulated geo-stress

Xin Cai et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2020)

Article Engineering, Geological

Dynamic Strength and Cracking Behaviors of Single-Flawed Rock Subjected to Coupled Static-Dynamic Compression

Zelin Yan et al.

ROCK MECHANICS AND ROCK ENGINEERING (2020)

Article Engineering, Geological

A Theoretical and Experimental Study of Stress-Strain, Creep and Failure Mechanisms of Intact Coal

Liang Zhang et al.

ROCK MECHANICS AND ROCK ENGINEERING (2020)

Article Engineering, Mechanical

Crack initiation and failure development in bimrocks using digital image correlation under dynamic load

Mansour Sharafisafa et al.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2020)

Article Engineering, Geological

Water saturation effects on dynamic fracture behavior of sandstone

Zilong Zhou et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2019)

Article Engineering, Geological

On Anisotropic Fracture Evolution and Energy Mechanism During Marble Failure Under Uniaxial Deformation

Y. Wang et al.

ROCK MECHANICS AND ROCK ENGINEERING (2019)

Article Engineering, Geological

Dynamic Response and Failure Mechanism of Brittle Rocks Under Combined Compression-Shear Loading Experiments

Yuan Xu et al.

ROCK MECHANICS AND ROCK ENGINEERING (2018)

Article Engineering, Mechanical

Hysteresis energy-based failure indicators for concrete and brittle rocks under the condition of fatigue loading

Zhengyang Song et al.

INTERNATIONAL JOURNAL OF FATIGUE (2018)

Article Engineering, Geological

Experimental Study on Mechanical Properties and Anchorage Performances of Rock Mass in the Fault Fracture Zone

Qian Yin et al.

INTERNATIONAL JOURNAL OF GEOMECHANICS (2018)

Article Construction & Building Technology

Dynamic Compressive Characteristics of Sandstone under Confining Pressure and Radial Gradient Stress with the SHPB Test

Shiming Wang et al.

ADVANCES IN CIVIL ENGINEERING (2018)

Article Mining & Mineral Processing

Numerical simulation and analysis of drill rods vibration during roof bolt hole drilling in underground mines

Shaowei Liu et al.

INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2018)

Article Mining & Mineral Processing

A numerical simulation study on mechanical behaviour of coal with bedding planes under coupled static and dynamic load

Lihai Tan et al.

INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2018)

Article Engineering, Geological

Dynamic response of pre-stressed rock with a circular cavity subject to transient loading

Ming Tao et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2017)

Proceedings Paper Mining & Mineral Processing

Numerical Simulation of Granite Plates Containing a Cylindrical Opening in Compression

Michail A. Lotidis et al.

ISRM EUROPEAN ROCK MECHANICS SYMPOSIUM EUROCK 2017 (2017)

Article Mining & Mineral Processing

Rock-breaking mechanism and experimental analysis of confined blasting of borehole surrounding rock

Liu Changyou et al.

INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2017)

Article Engineering, Geological

Dynamic Tensile Strength of Coal under Dry and Saturated Conditions

Yixin Zhao et al.

ROCK MECHANICS AND ROCK ENGINEERING (2016)

Article Construction & Building Technology

Effect of imperfect interface on the dynamic response of a circular lined tunnel impacted by plane P-waves

C. P. Yi et al.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2016)

Article Materials Science, Multidisciplinary

Ncorr: Open-Source 2D Digital Image Correlation Matlab Software

J. Blaber et al.

EXPERIMENTAL MECHANICS (2015)

Article Engineering, Geological

Experimental study of coalescence mechanisms and failure under uniaxial compression of granite containing multiple holes

P. Lin et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2015)

Article Engineering, Environmental

Displacement field analysis for cracking processes in bonded-particle model

Xiao-Ping Zhang et al.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2014)

Article Metallurgy & Metallurgical Engineering

Fracture evolution around pre-existing cylindrical cavities in brittle rocks under uniaxial compression

Xing-dong Zhao et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2014)

Article Metallurgy & Metallurgical Engineering

Degradation mechanism of rock under impact loadings by integrated investigation on crack and damage development

Zhou Zi-long et al.

JOURNAL OF CENTRAL SOUTH UNIVERSITY (2014)

Article Mechanics

Influence of flaw inclination angle and loading condition on crack initiation and propagation

Huanqiang Li et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2012)

Article Engineering, Geological

Experimental and numerical analyses of an opening in a jointed rock mass under biaxial compression

Myung Sagong et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2011)

Article Metallurgy & Metallurgical Engineering

Energy consumption in rock fragmentation at intermediate strain rate

Hong Liang et al.

JOURNAL OF CENTRAL SOUTH UNIVERSITY OF TECHNOLOGY (2009)

Article Mechanics

Modeling of compression-induced splitting failure in heterogeneous brittle porous,solids

CA Tang et al.

ENGINEERING FRACTURE MECHANICS (2005)

Article Engineering, Geological

Dynamic characteristics of granite subjected to intermediate loading rate

XB Li et al.

ROCK MECHANICS AND ROCK ENGINEERING (2005)

Article Engineering, Geological

Effects of loading rate on rock fracture: fracture characteristics and energy partitioning

ZX Zhang et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2000)