Related references
Note: Only part of the references are listed.In-Plane Shear Behavior of Stone Masonry Panels Strengthened through Grout Injection and Fiber Reinforced Cementitious Matrices
Francesca Ferretti et al.
INTERNATIONAL JOURNAL OF ARCHITECTURAL HERITAGE (2021)
In-plane behaviour of clay brick masonry wallettes retrofitted with single-sided fabric-reinforced cementitious matrix and deep mounted carbon fibre strips
O. S. Turkmen et al.
BULLETIN OF EARTHQUAKE ENGINEERING (2020)
Experimental and numerical evaluation of fiber-matrix interface behaviour of different FRCM systems
Alessandro Bellini et al.
COMPOSITES PART B-ENGINEERING (2019)
Destructive and minor destructive tests on masonry buildings: Experimental results and comparison between shear failure criteria
Francesca Ferretti et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Masonry columns strengthened with FRCM system: Numerical and experimental evaluation
F. S. Murgo et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Cyclic bond behavior of FRCM composites applied on masonry substrate
Alessandro Bellini et al.
COMPOSITES PART B-ENGINEERING (2019)
Out-of-plane seismic retrofitting of masonry walls with Textile Reinforced Mortar composites
Stefano De Santis et al.
BULLETIN OF EARTHQUAKE ENGINEERING (2019)
Analysis of FRCM and CRM parameters for the in-plane shear strengthening of different URM types
Marta Del Zoppo et al.
COMPOSITES PART B-ENGINEERING (2019)
Experimental In-Plane Shear Capacity of Clay Brick Masonry Panels Strengthened with FRCM and FRM Composites
Marta Del Zoppo et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2019)
Interface modeling approach for the study of the bond behavior of FRCM strengthening systems
E. Grande et al.
COMPOSITES PART B-ENGINEERING (2018)
A detailed micro-modelling approach for the structural analysis of masonry assemblages
V Sarhosis et al.
COMPUTERS & STRUCTURES (2018)
In-Plane Strengthening of Clay Brick and Block Masonry Walls Using Textile-Reinforced Mortar
Marta Giaretton et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2018)
Recommendation of RILEM Technical Committee 250-CSM: Test method for Textile Reinforced Mortar to substrate bond characterization
Gianmarco de Felice et al.
MATERIALS AND STRUCTURES (2018)
Modelling the nonlinear behaviour of masonry walls strengthened with textile reinforced mortars
X. Wang et al.
ENGINEERING STRUCTURES (2017)
Experimental investigation of tensile and bond properties of Carbon-FRCM composites for strengthening masonry elements
Francesca Giulia Carozzi et al.
COMPOSITES PART B-ENGINEERING (2017)
Glass fabric reinforced cementitious matrix: Tensile properties and bond performance on masonry substrate
Marianovella Leone et al.
COMPOSITES PART B-ENGINEERING (2017)
Performance assessment of basalt FRCM for retrofit applications on masonry
Gian Piero Lignola et al.
COMPOSITES PART B-ENGINEERING (2017)
Simple holonomic homogenization model for the non-linear static analysis of in-plane loaded masonry walls strengthened with FRCM composites
Elisa Bertolesi et al.
COMPOSITE STRUCTURES (2016)
Modelling of the in-plane behaviour of masonry walls strengthened with polymeric grids embedded in cementitious mortar layers
Angelo Garofano et al.
COMPOSITES PART B-ENGINEERING (2016)
Shear strengthening of unreinforced masonry wall with different fiber reinforced mortar jacketing
Yavuz Yardim et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Nonlinear analysis of masonry panels strengthened with textile reinforced mortar
M. Basili et al.
ENGINEERING STRUCTURES (2016)
Retrofitting of masonry walls by using a mortar joint technique; experiments and numerical validation
Chuanlin Wang et al.
ENGINEERING STRUCTURES (2016)
Numerical and experimental study of GFRP-masonry interface behavior: Bond evolution and role of the mortar layers
C. Mazzotti et al.
COMPOSITES PART B-ENGINEERING (2015)
A qualification method for externally bonded Fibre Reinforced Cementitious Matrix (FRCM) strengthening systems
Luigi Ascione et al.
COMPOSITES PART B-ENGINEERING (2015)
Structural behaviour of masonry panels strengthened with an innovative hemp fibre composite grid
Costantino Menna et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Experimental and analytical study to evaluate the effectiveness of an in-plane reinforcement for masonry walls using GFRP meshes
Natalino Gattesco et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Seismic assessment of existing and strengthened stone-masonry buildings: critical issues and possible strategies
A. Penna
BULLETIN OF EARTHQUAKE ENGINEERING (2015)
Diagonal compression tests on masonry walls strengthened with a GFRP mesh reinforced mortar coating
N. Gattesco et al.
BULLETIN OF EARTHQUAKE ENGINEERING (2015)
Performance of masonry buildings during the Emilia 2012 earthquake
Andrea Penna et al.
BULLETIN OF EARTHQUAKE ENGINEERING (2014)
Mechanical properties and numerical modeling of Fabric Reinforced Cementitious Matrix (FRCM) systems for strengthening of masonry structures
Francesca Giulia Carozzi et al.
COMPOSITE STRUCTURES (2014)
Shear strengthening of wall panels through jacketing with cement mortar reinforced by GFRP grids
Marco Corradi et al.
COMPOSITES PART B-ENGINEERING (2014)
Numerical modeling of Fabric Reinforce Cementitious Matrix composites (FRCM) in tension
Elisa Bertolesi et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Evaluation of different computational modelling strategies for the analysis of low strength masonry structures
V. Giamundo et al.
ENGINEERING STRUCTURES (2014)
URM Walls Strengthened with Fabric-Reinforced Cementitious Matrix Composite Subjected to Diagonal Compression
Saman Babaeidarabad et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2014)
Analytical and numerical modeling of composite-to-brick bond
F. Ceroni et al.
MATERIALS AND STRUCTURES (2014)
In-plane behaviour of tuff masonry strengthened with inorganic matrix-grid composites
Fulvio Parisi et al.
COMPOSITES PART B-ENGINEERING (2013)
A three-dimensional cyclic meso-scale numerical procedure for simulation of unreinforced masonry structures
Amjad J. Aref et al.
COMPUTERS & STRUCTURES (2013)
Finite element modelling of unreinforced masonry shear wallettes strengthened using twisted steel bars
Robert B. Petersen et al.
CONSTRUCTION AND BUILDING MATERIALS (2012)
A non-linear interface element for 3D mesoscale analysis of brick-masonry structures
L. Macorini et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2011)
Shear capacity of masonry walls externally strengthened by a cement-based composite material: An experimental campaign
Ciro Faella et al.
CONSTRUCTION AND BUILDING MATERIALS (2010)
In-Plane Shear Behavior of Masonry Panels Strengthened with NSM CFRP Strips. II: Finite-Element Model
Robert B. Petersen et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2010)
Modelling and analysis of FRP-strengthened masonry panels
Ernesto Grande et al.
ENGINEERING STRUCTURES (2008)
Modelling approaches of the in-plane shear behaviour of unreinforced and FRP strengthened masonry panels
A. Gabor et al.
COMPOSITE STRUCTURES (2006)
Experimental in-plane behavior of tuff masonry strengthened with cementitious matrix-grid composites
A. Prota et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2006)
Analysis of the in-plane shear behaviour of FRP reinforced hollow brick masonry walls
A Gabor et al.
STRUCTURAL ENGINEERING AND MECHANICS (2005)
Masonry wall crack control with carbon fiber reinforced polymer
GPAG van Zijl et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2005)
Load carrying capacity of 2D FRP/strengthened masonry structures
L Ascione et al.
COMPOSITES PART B-ENGINEERING (2005)
Modeling masonry shear-compression: Role of dilatancy highlighted
GPAG van Zijl
JOURNAL OF ENGINEERING MECHANICS (2004)
Re-strengthening of brickwork to reduce crack width
LGW Verhoef et al.
ADVANCES IN ENGINEERING SOFTWARE (2002)