Related references
Note: Only part of the references are listed.Rheological properties of digestate from agricultural biogas plants: An overview of measurement techniques and influencing factors
Nico Schneider et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2020)
Investigation of the mixing behaviour of a full-scale biogas plant using biodegradable tracers
Benjamin Ohnmacht et al.
BIOMASS & BIOENERGY (2020)
Hysteresis effect of propeller jet flows in viscoelastic fluids: Steady state flow patterns
Can Cao et al.
CHEMICAL ENGINEERING SCIENCE (2020)
Flow Compartments in Viscoelastic Fluids Using Radial Impellers in Stirred Tanks
Markus Kolano et al.
CHEMICAL ENGINEERING & TECHNOLOGY (2019)
Energy efficient design of high depth raceway pond using computational fluid dynamics
S. S. Sawant et al.
RENEWABLE ENERGY (2019)
Effects of turbulence modeling on the prediction of flow characteristics of mixing non-Newtonian fluids in a stirred vessel
Peng Wang et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2019)
Experimental investigation of the mixing characteristics of non-Newtonian fluids through an ultrasonic Doppler anemometer (UDA)
Peng Wang et al.
EXPERIMENTAL THERMAL AND FLUID SCIENCE (2019)
Effect of agitation time on nutrient distribution in full-scale CSTR biogas digesters
Philipp Kress et al.
BIORESOURCE TECHNOLOGY (2018)
Mixing of non-Newtonian fluids in a cylindrical stirred vessel equipped with a novel side-entry propeller
Peng Wang et al.
CHEMICAL ENGINEERING SCIENCE (2018)
Influence of mixing on anaerobic digestion efficiency in stirred tank digesters: A review
Ibrahim Denka Kariyama et al.
WATER RESEARCH (2018)
Blending in above ground storage tanks with side-entering agitators
R. K. Grenville et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2018)
Influence of rheological properties of stirred liquids on the axial and tangential forces in a vessel with a PMT impeller
Anna Story et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2018)
A new model of cavern diameter based on a validated CFD study on stirring of a highly shear-thinning fluid
Anna Story et al.
CHEMICAL PAPERS (2017)
Mixing of Newtonian and viscoelastic fluids using butterfly impellers
J. Ramsay et al.
CHEMICAL ENGINEERING SCIENCE (2016)
Computational simulation of mixing flow of shear thinning non-Newtonian fluids with various impellers in a stirred tank
Jaime Sossa-Echeverria et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2015)
Effect of Mixer Geometry and Operating Conditions on Flow Mixing of Shear Thinning Fluids with Yield Stress
Jaime Sossa-Echeverria et al.
AICHE JOURNAL (2014)
Effects of mixing on the result of anaerobic digestion: Review
Johan Lindmark et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2014)
Comparative analysis of anaerobically digested wastes flow properties
S. Mbaye et al.
WASTE MANAGEMENT (2014)
Different mixing modes for biogas plants using energy crops
Alexandra Kowalczyk et al.
APPLIED ENERGY (2013)
Axial thrust of axial flow impellers
Ivan Fort et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2013)
How Efficient are Agitators in Biogas Digesters? Determination of the Efficiency of Submersible Motor Mixers and Incline Agitators by Measuring Nutrient Distribution in Full-Scale Agricultural Biogas Digesters
Andreas Lemmer et al.
ENERGIES (2013)
Solids Suspension Study in a Side-Entering Stirred Tank Through CFD Modeling
Jia Chen et al.
INTERNATIONAL JOURNAL OF CHEMICAL REACTOR ENGINEERING (2013)
Impeller characterization and selection: Balancing efficient hydrodynamics with process mixing requirements
Marcio B. Machado et al.
AICHE JOURNAL (2012)
Influence of Rheology on the Flow Pattern in Stirred Biogas Plants
Manuel Brehmer et al.
CHEMIE INGENIEUR TECHNIK (2012)
Mixing of Newtonian and Non-Newtonian Fluids in a Cylindrical Mixer Equipped with a Side-Entry Impeller
Jaime Sossa-Echeverria et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2012)
THE EFFECT OF OFF-WALL CLEARANCE OF A SIDE-ENTERING IMPELLER ON THE MIXING OF PULP SUSPENSIONS IN A CYLINDRICAL STOCK CHEST
Manish R. Bhole et al.
CANADIAN JOURNAL OF CHEMICAL ENGINEERING (2011)
CFD investigation of turbulence models for mechanical agitation of non-Newtonian fluids in anaerobic digesters
Binxin Wu
WATER RESEARCH (2011)
COMPUTATIONAL MODELLING OF INDUSTRIAL PULP STOCK CHESTS
S. Bhattacharya et al.
CANADIAN JOURNAL OF CHEMICAL ENGINEERING (2010)
Performance of Four Axial Flow Impellers for Agitation of Pulp Suspensions in a Laboratory-Scale Cylindrical Stock Chest
Manish R. Bhole et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2010)
Characterization of axial flow impellers in pulp fibre suspensions
M. Bhole et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2009)
Cavern formation in pulp suspensions using side-entering axial-flow impellers
Leo K. Hui et al.
CHEMICAL ENGINEERING SCIENCE (2009)
Effects of mixing on methane production during thermophilic anaerobic digestion of manure: Lab-scale and pilot-scale studies
Prasad Kaparaju et al.
BIORESOURCE TECHNOLOGY (2008)
Using computational fluid dynamics modeling and ultrasonic Doppler velocimetry to study pulp suspension mixing
Salwan Saeed et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2007)
Simulation of mixing dynamics in agitated pulp stock chests using CFD
C. Ford et al.
AICHE JOURNAL (2006)
Anaerobic digestion of animal waste: Effect of mode of mixing
K Karim et al.
WATER RESEARCH (2005)
Experience with experimental standards for measurements of various parameters in stirred tanks: A comparative test
M Kraume et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2001)
Anaerobic codigestion of municipal solid waste and biosolids under various mixing conditions - I. Digester performance
PG Stroot et al.
WATER RESEARCH (2001)
Swirling flow of viscoelastic fluids. Part 1. Interaction between inertia and elasticity
JR Stokes et al.
JOURNAL OF FLUID MECHANICS (2001)
Share Paper
