☆ 4.8 Article

A Novel Tin-Bonded Silicon Anode for Lithium-Ion Batteries

ACS APPLIED MATERIALS & INTERFACES (2021)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Si@Cu3Si nano-composite prepared by facile method as high-performance anode for lithium-ion batteries

Yao Zhang et al.

Summary: Silicon has been widely accepted as a promising anode material for new-generation lithium-ion batteries due to its high lithium storage density and abundant mineral resources. This study proposed a simple and environmentally friendly method to prepare a Si-Cu3Si composite with coherent phase boundaries, which significantly improves the cyclic stability of silicon anodes. The effects of morphology, composition, and structure on the electrochemical performance of the nano-sized Si@Cu3Si anode were clarified through various analyses.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

In Situ Developed Si@Polymethyl Methacrylate Capsule as a Li-Ion Battery Anode with High-Rate and Long Cycle-Life

Wei Wang et al.

Summary: A novel Si capsule with in situ developed polymethyl methacrylate (PMMA) shell prepared via microemulsion polymerization shows excellent electrochemical performance and capacity retention at high current densities.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Designing Adaptive Binders for Microenvironment Settings of Silicon Anode Particles

Haesung A. Lee et al.

Summary: This study introduces the concept of an adaptive binder to tackle the silicon anode challenge in Li-ion batteries. The binder exhibits adaptable capabilities in response to gradual changes in the microenvironments surrounding silicon particles, with reversible and irreversible chemical interactions stabilizing adhesion to the silicon particle surfaces. The adaptive properties of the binder contribute to maintaining a higher charge capacity after repeated battery cycles, highlighting the importance of adaptability in designing silicon-anode binders.

ADVANCED MATERIALS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Insights into the Li Diffusion Mechanism in Si/C Composite Anodes for Lithium-Ion Batteries

Xiang Gao et al.

Summary: This study investigates the atomic behavior of Li diffusion in Si/C composite materials using density functional theory, comparing two structural mixing formats: simple mixture and core-shell. It is found that carbon material increases Li diffusion in silicon by about 50%, with the mixture mode showing a more significant boost. The results offer new insights into Li diffusion behavior in Si/C composites and provide guidance for battery modeling and structure design.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Nanoscience & Nanotechnology

In Situ-Formed Artificial Solid Electrolyte Interphase for Boosting the Cycle Stability of Si-Based Anodes for Li-Ion Batteries

Hui Wang et al.

Summary: By forming an artificial solid electrolyte interphase (ASEI) on the surface of ferrosilicon/carbon (FeSi/C) anode through a designed nucleophilic reaction of polysulfides with vinylene carbonate (VC) and fluoroethylene carbonate (FEC) molecules, it effectively prevents electrolyte infiltration and decomposition while enabling Li+ transport, thus stabilizing the FeSi/C anode interface. The ASEI-modified FeSi/C anode exhibits a large reversible capacity, excellent cycling stability, and greatly elevated cycling coulombic efficiency, potentially serving as a high-capacity anode of LIBs.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Constructing Densely Compacted Graphite/Si/SiO2 Ternary Composite Anodes for High-Performance Li-Ion Batteries

Hao Wu et al.

Summary: The rational design of compact graphite/Si/SiO2 ternary composites enhances packing density and leads to higher areal capacity compared to pure graphite. Introducing Si/SiO2 clusters into void spaces between graphite particles provides an effective strategy for implementing graphite-Si composite anodes in next-generation Li-ion cells.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Binder-Free, Flexible, and Self-Standing Non-Woven Fabric Anodes Based on Graphene/Si Hybrid Fibers for High-Performance Li-Ion Batteries

Feng Shao et al.

Summary: In this study, a flexible graphene-fiber-fabric-based three-dimensional conductive network was designed to create a binder-free and self-standing silicon anode, demonstrating excellent battery performance. The GFF/Si-37.5% and GFF/Si-29.1% electrodes exhibited outstanding performance in terms of cyclability and reversible capacity.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Engineering, Environmental

Self-sacrificial-reaction guided formation of hierarchical electronic/ionic conductive shell enabling high-performance nano-silicon anode

Yu Zhou et al.

Summary: In this study, a hierarchical electronic/ionic conducting shell was cleverly constructed on nano-Si particles to enhance their stability and conductivity, effectively addressing the issue of surface oxidation. The optimized material exhibited outstanding cycle stability and rate capability, retaining 70.2% of its capacity after 200 cycles. This work provides a promising strategy for promoting the practical applications of Si nanoparticles as anode materials for lithium ion batteries.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Engineering, Environmental

Residual silica removal and nanopore generation on industrial waste silicon using ammonium fluoride and its application to lithium-ion battery anodes

Sung Eun Wang et al.

Summary: This study developed a new process using ammonium fluoride to remove residual silica and generate nanopores on raw silicon materials, improving their purity and surface area. When applied to Li-ion battery anodes, the modified silicon showed improved performance compared to raw silicon.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Chemistry, Physical

Molecular design of a multifunctional binder via grafting and crosslinking for high performance silicon anodes

Zhang Cao et al.

Summary: A multifunctional network design of polymeric binders has been employed to address the issues of large volumetric changes and fast capacity decay in silicon (Si) anodes, resulting in improved discharge capacity and capacity retention.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Nano Tin/Tin Oxide Attached onto Graphene Oxide Skeleton as a Fluorine Free Anode Material for Lithium-Ion Batteries

Andrzej P. Nowak et al.

INORGANIC CHEMISTRY (2020)

Add to Collection

Article Chemistry, Physical

Observably improving initial coulombic efficiency of C/SiOx anode using -C-O-PO3Li2 groups in lithium ion batteries

Haibang Zhang et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Three-dimensional porous Sn/NC spheres with outstanding properties for lithium ion battery

Wenyu Wang et al.

MATERIALS LETTERS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Nano/Microstructured Silicon-Carbon Hybrid Composite Particles Fabricated with Corn Starch Biowaste as Anode Materials for Li-Ion Batteries

Hyun Jung Kwon et al.

NANO LETTERS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Ultrahigh and Durable Volumetric Lithium/Sodium Storage Enabled by a Highly Dense Graphene-Encapsulated Nitrogen-Doped Carbon@Sn Compact Monolith

Yunyong Li et al.

NANO LETTERS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Binder-Free Electrodes for Advanced Sodium-Ion Batteries

Ting Jin et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Large-Scale Electric-Field Confined Silicon with Optimized Charge-Transfer Kinetics and Structural Stability for High-Rate Lithium-Ion Batteries

Tao Meng et al.

ACS NANO (2020)

Add to Collection

Article Chemistry, Physical

Improved adhesion of cross-linked binder and SiO2-coating enhances structural and cyclic stability of silicon electrodes for lithium-ion batteries

Sen Sun et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection

Article Multidisciplinary Sciences

A thick yet dense silicon anode with enhanced interface stability in lithium storage evidenced by in situ TEM observations

Junwei Han et al.

SCIENCE BULLETIN (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Interface Engineering of Silicon/Carbon Thin-Film Anodes for High-Rate Lithium-Ion Batteries

Ling Tong et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Review Engineering, Environmental

Recent progress of structural designs of silicon for performance -enhanced lithium -ion batteries

Ying Qi et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Nanoscience & Nanotechnology

One-Step Low-Temperature Molten Salt Synthesis of Two-Dimensional Si@SiOx@C Hybrids for High-Performance Lithium-Ion Batteries

Qian Liu et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Two-Dimensional Silicon/Carbon from Commercial Alloy and CO2 for Lithium Storage and Flexible Ti3C2Tx MXene-Based Lithium-Metal Batteries

Yongling An et al.

ACS NANO (2020)

Add to Collection

Article Engineering, Environmental

Surfactant-based selective assembly approach for Si-embedded silicon oxycarbide composite materials in lithium-ion batteries

Jihye Jang et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Proceedings Paper Green & Sustainable Science & Technology

Preparation and characterization of bakelite bonded magnet NdFeB used for electric generator

Ramlan Ramlan et al.

INTERNATIONAL CONFERENCE ON SUSTAINABLE ENERGY AND GREEN TECHNOLOGY 2019 (2020)

Add to Collection

Article Chemistry, Physical

Conductive polyaniline doped with phytic acid as a binder and conductive additive for a commercial silicon anode with enhanced lithium storage properties

Chengkun Zhang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Hollow double-layer carbon nanocage confined Si nanoparticles for high performance lithium-ion batteries

Jijun Lu et al.

NANOSCALE ADVANCES (2020)

Add to Collection

Article Chemistry, Physical

Double-shelled hollow carbon nanospheres as enclosed electrochemical reactors to enhance the lithium storage performance of silicon nanodots

Ruiyu Zhu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Chemistry, Physical

Vertical graphene growth on uniformly dispersed sub-nanoscale SiOx/N-doped carbon composite microspheres with a 3D conductive network and an ultra-low volume deformation for fast and stable lithium-ion storage

Meisheng Han et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Engineering, Electrical & Electronic

Synthesis of macroporous carbon materials as anode material for high-performance lithium-ion batteries

Yuan-Xiang Fu et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2019)

Add to Collection

Article Chemistry, Physical

Magnesium silicide-derived porous Sb-Si-C composite for stable lithium storage

Hyungeun Seo et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Chemistry, Physical

Si/Ti3SiC2 composite anode with enhanced elastic modulus and high electronic conductivity for lithium-ion batteries

Zhe Dong et al.

JOURNAL OF POWER SOURCES (2019)

Add to Collection

Article Chemistry, Physical

A facile and versatile strategy towards high-performance Si anodes for Li-ion capacitors: Concomitant conductive network construction and dual-interfacial engineering

Rong Shao et al.

NANO ENERGY (2019)

Add to Collection

Article Nanoscience & Nanotechnology

A Comprehensive Study of Hydrolyzed Polyacrylamide as a Binder for Silicon Anodes

Andrea Miranda et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Chemistry, Physical

An eggshell-structured N-doped silicon composite anode with high anti-pulverization and favorable electronic conductivity

Xiaolei Qu et al.

JOURNAL OF POWER SOURCES (2019)

Add to Collection

Article Chemistry, Physical

Roll to roll manufacturing of fast charging, mechanically robust 0D/2D nanolayered Si-graphene anode with well-interfaced and defect engineered structures

Biwei Deng et al.

ENERGY STORAGE MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

A trimethylol melamine functionalized polyvinyl alcohol network for high performance nano-silicon anodes

Xiaojian Shan et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Chemistry, Inorganic & Nuclear

The controllable synthesis of Si/Ge composites with a synergistic effect for enhanced Li storage performance

Kai Ma et al.

INORGANIC CHEMISTRY FRONTIERS (2019)

Add to Collection

Article Chemistry, Physical

Dispersion-strengthened microparticle silicon composite with high anti-pulverization capability for Li-ion batteries

Yaxiong Yang et al.

ENERGY STORAGE MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Improved Cycling Performance of a Si Nanoparticle Anode Utilizing Citric Acid as a Surface-Modifying Agent

Cao Cuong Nguyen et al.

LANGMUIR (2017)

Add to Collection

Article Chemistry, Physical

A Novel Strategy to Suppress Capacity and Voltage Fading of Li- and Mn-Rich Layered Oxide Cathode Material for Lithium-Ion Batteries

Shiming Zhang et al.

ADVANCED ENERGY MATERIALS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Highly cross-linked Cu/a-Si core-shell nanowires for ultra-long cycle life and high rate lithium batteries

Hongxiang Wang et al.

NANOSCALE (2016)

Add to Collection

Article Chemistry, Physical

FeCo nanocrystals encapsulated in N-doped carbon nanospheres/thermal reduced graphene oxide hybrids: Facile synthesis, magnetic and catalytic properties

Lianbo Ma et al.

CARBON (2014)

Add to Collection

Article Chemistry, Physical

Potassium carbonate as film forming electrolyte additive for lithium-ion batteries

Quan-Chao Zhuang et al.

JOURNAL OF POWER SOURCES (2013)

Add to Collection

Article Electrochemistry

Electrochemical performance of Al-Si-graphite composite as anode for lithium-ion batteries

Wenchao Zhou et al.

ELECTROCHEMISTRY COMMUNICATIONS (2011)

Add to Collection

Article Chemistry, Physical

Anode properties of thick-film electrodes prepared by gas deposition of Ni-coated Si particles

Hiroyuki Usui et al.

JOURNAL OF POWER SOURCES (2011)

Add to Collection

Article Electrochemistry

Anode Properties of Cu-Coated Si Thick Film Electrodes Prepared by Electroless Deposition and Gas-Deposition

Hiroyuki Usui et al.

ELECTROCHEMISTRY (2010)

Add to Collection

Article Chemistry, Physical

Alkali carbonate-coated graphite electrode for lithium-ion batteries

S. Komaba et al.

CARBON (2008)

Add to Collection

Article Electrochemistry

Impact of sodium salt coating on a graphite negative electrode for lithium-ion batteries

S Komaba et al.

ELECTROCHEMICAL AND SOLID STATE LETTERS (2006)

Add to Collection

Article Chemistry, Physical

Effect of Li2CO3 additive on gas generation in lithium-ion batteries

JS Shin et al.

JOURNAL OF POWER SOURCES (2002)

Add to Collection

Article Physics, Applied

Study on the preparation techniques and properties of bonded magnetostrictive materials

HY Liu et al.

JOURNAL OF APPLIED PHYSICS (2002)

Add to Collection

Article Chemistry, Physical

Suppressive effect of Li2CO3 on initial irreversibility at carbon anode in Li-ion batteries

YK Choi et al.

JOURNAL OF POWER SOURCES (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.