Related references
Note: Only part of the references are listed.A novel, precipitated polybutylene terephthalate feedstock material for powder bed fusion of polymers (PBF): Material development and initial PBF processability
Maximilian A. Dechet et al.
MATERIALS & DESIGN (2021)
Development of poly(L-lactide) (PLLA) microspheres precipitated from triacetin for application in powder bed fusion of polymers
Maximilian A. Dechet et al.
ADDITIVE MANUFACTURING (2020)
Improving the coloring of polypropylene materials for powder bed fusion by plasma surface functionalization
Juan S. Gomez Bonilla et al.
ADDITIVE MANUFACTURING (2020)
Bottom-Up Design of Composite Supraparticles for Powder-Based Additive Manufacturing
Herbert Canziani et al.
SMALL (2020)
Thermal rounding of micron-sized polymer particles in a downer reactor: direct vs indirect heating
Juan Sebastian Gomez Bonilla et al.
RAPID PROTOTYPING JOURNAL (2020)
A review of the process physics and material screening methods for polymer powder bed fusion additive manufacturing
Camden A. Chatham et al.
PROGRESS IN POLYMER SCIENCE (2019)
Redispersible Pickering emulsion powder stabilized by nanocrystalline cellulose combining with cellulosic derivatives
Jin Xie et al.
CARBOHYDRATE POLYMERS (2019)
Additive manufacturing of ceramics for dental applications: A review
Raquel Galante et al.
DENTAL MATERIALS (2019)
Improved performance of thin-film nanocomposite nanofiltration membranes as induced by embedded polydopamine-coated silica nanoparticles
Micah Belle Marie Yap Ang et al.
SEPARATION AND PURIFICATION TECHNOLOGY (2019)
A Dirty Story: Improving Colloidal Monolayer Formation by Understanding the Effect of Impurities at the Air/Water Interface
Marcel Rey et al.
LANGMUIR (2019)
Segregation in Drying Binary Colloidal Droplets
Wendong Liu et al.
ACS NANO (2019)
Supraparticles: Functionality from Uniform Structural Motifs
Susanne Wintzheimer et al.
ACS NANO (2018)
Modelling of the spray drying process for particle design
Ivana M. Cotabarren et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2018)
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Tuan D. Ngo et al.
COMPOSITES PART B-ENGINEERING (2018)
Investigating mechanical properties of polymethylmethacrylate/silver nanoparticle composites by molecular dynamics simulation
Shin-Pon Ju et al.
JOURNAL OF NANOPARTICLE RESEARCH (2017)
Stratification and Size Segregation of Ternary and Polydisperse Colloidal Suspensions during Drying
Andrea Fortini et al.
LANGMUIR (2017)
Polymers for 3D Printing and Customized Additive Manufacturing
Samuel Clark Ligon et al.
CHEMICAL REVIEWS (2017)
Biomedical applications of additive manufacturing: Present and future
Sunpreet Singh et al.
CURRENT OPINION IN BIOMEDICAL ENGINEERING (2017)
Analysis of the material properties involved in laser sintering of thermoplastic polyurethane
Leander Verbelen et al.
ADDITIVE MANUFACTURING (2017)
DD Stimuli-Responsive Liquid Marbles: Controlling Structure, Shape, Stability, and Motion
Syuji Fujii et al.
ADVANCED FUNCTIONAL MATERIALS (2016)
Controlling particle size in the Stober process and incorporation of calcium
Sarah L. Greasley et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2016)
Hierarchical Structure Formation of Nanoparticulate Spray-Dried Composite Aggregates
Sabrina Zellmer et al.
ACS NANO (2015)
Drying of Droplets Containing Insoluble Nanoscale Particles: Second Drying Stage
U. Maurice et al.
DRYING TECHNOLOGY (2015)
An experimental study into the effects of bulk and flow behaviour of laser sintering polymer powders on resulting part properties
Stefan Ziegelmeier et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
A Review of the Properties and Applications of Poly (Methyl Methacrylate) (PMMA)
Umar Ali et al.
POLYMER REVIEWS (2015)
Polymer Powders for Selective Laser Sintering (SLS)
Manfred Schmid et al.
PROCEEDINGS OF PPS-30: THE 30TH INTERNATIONAL CONFERENCE OF THE POLYMER PROCESSING SOCIETY (2015)
Measurement and simulation of micromechanical properties of nanostructured aggregates via nanoindentation and DEM-simulation
Carsten Schilde et al.
POWDER TECHNOLOGY (2014)
Drying of Droplet Containing Insoluble Nanoscale Particles: Numerical Simulations and Parametric Study
Uri Maurice et al.
DRYING TECHNOLOGY (2013)
Continuous species transport and population balance models for first drying stage of nanosuspension droplets
M. Mezhericher et al.
CHEMICAL ENGINEERING JOURNAL (2012)
Production of polymer particles below 5 μm by wet grinding
Jochen Schmidt et al.
POWDER TECHNOLOGY (2012)
Modelling the morphological evolution of nanosuspension droplet in constant-rate drying stage
M. Mezhericher et al.
CHEMICAL ENGINEERING SCIENCE (2011)
Development and evaluation of orally disintegrating tablets (ODTs) containing Ibuprofen granules prepared by hot melt extrusion
Andreas Gryczke et al.
COLLOIDS AND SURFACES B-BIOINTERFACES (2011)
Mechanism of formation and nanostructure of Stober silica particles
V. M. Masalov et al.
NANOTECHNOLOGY (2011)
Spray drying modelling based on advanced droplet drying kinetics
M. Mezhericher et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2010)
Two-fluid spray atomisation and pneumatic nozzles for fluid bed coating/agglomeration purposes: A review
Peter Dybdahl Hede et al.
CHEMICAL ENGINEERING SCIENCE (2008)
Pharmaceutical particle engineering via spray drying
Reinhard Vehring
PHARMACEUTICAL RESEARCH (2008)
Particle formation in spray drying
Reinhard Vehring et al.
JOURNAL OF AEROSOL SCIENCE (2007)
Selective laser sintering of PEEK
M. Schmidt et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2007)
Theoretical drying model of single droplets containing insoluble or dissolved solids
M. Mezhericher et al.
DRYING TECHNOLOGY (2007)
Adhesion as an interplay between particle size and surface roughness
J. Katainen et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2006)
Effect of glidants in binary powder mixtures
K Meyer et al.
POWDER TECHNOLOGY (2004)
Interparticle van der Waals force in powder flowability and compactibility
Q Li et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2004)
Products and processes for a sustainable chemical industry: a review of achievements and prospects
JF Jenck et al.
GREEN CHEMISTRY (2004)
Adhesion between nanoscale rough surfaces - II. Measurement and comparison with theory
YI Rabinovich et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2000)