4.8 Article

Reduction of Nonradiative Loss in Inverted Perovskite Solar Cells by Donor-π-Acceptor Dipoles

Related references

Note: Only part of the references are listed.
Article Multidisciplinary Sciences

Nanoscale localized contacts for high fill factors in polymer-passivated perovskite solar cells

Jun Peng et al.

Summary: This research introduces a nanopatterned electron transport layer that overcomes the trade-off between passivation quality and series resistance in traditional polymer passivation layers. Combining the nanopatterned electron transport layer with a dopant-free hole transport layer improves the efficiency and stability of perovskite solar cells.

SCIENCE (2021)

Article Multidisciplinary Sciences

Metallic surface doping of metal halide perovskites

Yuze Lin et al.

Summary: The study demonstrates the method of n-type doping on the surface of halide perovskites using silver, strontium, and cerium ions, even up to the metallic state, providing crucial insights into tuning the material properties of semiconductors.

NATURE COMMUNICATIONS (2021)

Article Chemistry, Physical

Direct Observation on p- to n-Type Transformation of Perovskite Surface Region during Defect Passivation Driving High Photovoltaic Efficiency

Shaobing Xiong et al.

Summary: The use of natural additive capsaicin in perovskite solar cells leads to defect passivation and transformation of surface energetics, resulting in improved charge transport, efficiency, and stability. This approach shows potential for significant enhancement of PSC performance.

JOULE (2021)

Article Multidisciplinary Sciences

Efficient perovskite solar cells via improved carrier management

Jason J. Yoo et al.

Summary: Metal halide perovskite solar cells have shown great potential to disrupt the silicon solar cell market with their improved performance, yet still face limitations in light-harvesting due to charge carrier recombination. Efforts to enhance charge carrier management offer a path to increase device performance and approach the theoretical efficiency limit of PSCs.

NATURE (2021)

Article Chemistry, Physical

Cation-size mismatch and interface stabilization for efficient NiOx-based inverted perovskite solar cells with 21.9% efficiency

Yousheng Wang et al.

Summary: The study focuses on the importance of stabilizing perovskite phases and interfaces in stacked perovskite photovoltaics for efficiency and stability. Special A-site cation combinations and interface treatment techniques were used to prepare hysteresis-free, high-efficiency solar cells based on NiOx.

NANO ENERGY (2021)

Article Chemistry, Multidisciplinary

Tuning an Electrode Work Function Using Organometallic Complexes in Inverted Perovskite Solar Cells

Jiantao Wang et al.

Summary: In this study, synthesized organometallic complexes were utilized as cathode interlayers to tune the work function of the electrode, resulting in improved power conversion efficiency and long-term stability of perovskite solar cells. Experimental results demonstrated significant enhancement in PCE and stability for both Ag and Au cathodes modified with these complexes.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

Article Chemistry, Physical

Multifunctional Chemical Bridge and Defect Passivation for Highly Efficient Inverted Perovskite Solar Cells

Qisen Zhou et al.

Summary: By constructing a chemical bridge at the interface of PTAA/perovskites, interfacial recombination of charge carriers is minimized, leading to improved efficiency and negligible hysteresis in inverted perovskite solar cells.

ACS ENERGY LETTERS (2021)

Article Nanoscience & Nanotechnology

Durable Defect Passivation of the Grain Surface in Perovskite Solar Cells with π-Conjugated Sulfamic Acid Additives

Kun Cao et al.

Summary: The use of 4-ABSA as a passivation agent for perovskite solar cells has shown to significantly improve efficiency and stability, by constructing a compact and smooth perovskite film and passivating both negative- and positive-charged defects. The pi-conjugated system in 4-ABSA also induces preferred perovskite crystal orientation, leading to enhanced power conversion efficiency.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Chemistry, Multidisciplinary

Universal Bottom Contact Modification with Diverse 2D Spacers for High-Performance Inverted Perovskite Solar Cells

Jun Li et al.

Summary: This study investigates the effect of different 2D spacers on the bottom interface of inverted p-i-n PVSCs, revealing a significant improvement in efficiency and stability after optimization, attributed to the formation of 2D/3D heterojunction and related mechanisms. Additionally, the unencapsulated devices demonstrate excellent stability with 90% retention of initial efficiency after storage under ambient conditions.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Chemistry, Multidisciplinary

Robust Molecular Dipole-Enabled Defect Passivation and Control of Energy-Level Alignment for High-Efficiency Perovskite Solar Cells

Bing Wang et al.

Summary: This study successfully enhanced the performance of perovskite solar cells by passivating defects and modulating energy level alignment at the interface using polar chlorine-terminated silane molecules.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Article Chemistry, Multidisciplinary

Synergistical Dipole-Dipole Interaction Induced Self-Assembly of Phenoxazine-Based Hole-Transporting Materials for Efficient and Stable Inverted Perovskite Solar Cells

Ning Cai et al.

Summary: Through the design of two ordered structure HTMs, especially N01, high-performance perovskite solar cells can be achieved with higher intrinsic hole mobility and more favorable interfacial properties.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Article Chemistry, Physical

Effect of Side-Group-Regulated Dipolar Passivating Molecules on CsPbBr3 Perovskite Solar Cells

Jialong Duan et al.

Summary: This study demonstrates the importance of regulating the side group of a dipole molecule for interfacial passivation and surface energy level reconstruction of CsPbBr3 perovskite films to achieve efficient hole extraction and improve power conversion efficiency.

ACS ENERGY LETTERS (2021)

Article Multidisciplinary Sciences

Efficient and stable inverted perovskite solar cells with very high fill factors via incorporation of star-shaped polymer

Qi Cao et al.

Summary: This study introduces a star-shaped polymer to enhance charge transport and inhibit ion migration in perovskite solar cells, leading to improved efficiency and stability. Modified devices demonstrate significant performance enhancements and excellent long-term operational stability.

SCIENCE ADVANCES (2021)

Article Chemistry, Multidisciplinary

Synergistic Reinforcement of Built-In Electric Fields for Highly Efficient and Stable Perovskite Photovoltaics

Wei-Ting Wang et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Article Chemistry, Physical

Efficient Perovskite Solar Cells by Reducing Interface-Mediated Recombination: a Bulky Amine Approach

Lusheng Liang et al.

ADVANCED ENERGY MATERIALS (2020)

Article Multidisciplinary Sciences

Efficient and stable tin perovskite solar cells enabled by amorphous-polycrystalline structure

Xiao Liu et al.

NATURE COMMUNICATIONS (2020)

Article Chemistry, Multidisciplinary

Passivation Mechanism Exploiting Surface Dipoles Affords High-Performance Perovskite Solar Cells

Fatemeh Ansari et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

Review Multidisciplinary Sciences

China's progress of perovskite solar cells in 2019

Danyu Cui et al.

SCIENCE BULLETIN (2020)

Article Multidisciplinary Sciences

A piperidinium salt stabilizes efficient metal-halide perovskite solar cells

Yen-Hung Lin et al.

SCIENCE (2020)

Review Chemistry, Multidisciplinary

Interfacial Dipole in Organic and Perovskite Solar Cells

Qi Chen et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

Article Chemistry, Multidisciplinary

Regulating Surface Termination for Efficient Inverted Perovskite Solar Cells with Greater Than 23% Efficiency

Fengzhu Li et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

Article Multidisciplinary Sciences

Stabilizing heterostructures of soft perovskite semiconductors

Yanbo Wang et al.

SCIENCE (2019)

Review Chemistry, Multidisciplinary

Reliable Measurement of Perovskite Solar Cells

Yanbo Wang et al.

ADVANCED MATERIALS (2019)

Article Multidisciplinary Sciences

Enhanced photovoltage for inverted planar heterojunction perovskite solar cells

Deying Luo et al.

SCIENCE (2018)

Review Nanoscience & Nanotechnology

Progress on Perovskite Materials and Solar Cells with Mixed Cations and Halide Anions

Luis K. Ono et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Article Nanoscience & Nanotechnology

Improved air stability of perovskite solar cells via solution-processed metal oxide transport layers

Jingbi You et al.

NATURE NANOTECHNOLOGY (2016)

Article Multidisciplinary Sciences

Electron-hole diffusion lengths > 175 μm in solution-grown CH3NH3PbI3 single crystals

Qingfeng Dong et al.

SCIENCE (2015)

Review Optics

The emergence of perovskite solar cells

Martin A. Green et al.

NATURE PHOTONICS (2014)

Article Multidisciplinary Sciences

Efficient planar heterojunction perovskite solar cells by vapour deposition

Mingzhen Liu et al.

NATURE (2013)

Article Chemistry, Physical

Improvement of spectral response by co-sensitizers for high efficiency dye-sensitized solar cells

Shufang Zhang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2013)

Article Chemistry, Multidisciplinary

High-efficiency dye-sensitized solar cell with a novel co-adsorbent

Liyuan Han et al.

ENERGY & ENVIRONMENTAL SCIENCE (2012)