Related references
Note: Only part of the references are listed.Vacancy-Enabled O3 Phase Stabilization for Manganese-Rich Layered Sodium Cathodes
Biwei Xiao et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)
Fluorinated Carbonate Electrolyte with Superior Oxidative Stability Enables Long-Term Cycle Stability of Na2/3Ni1/3Mn2/3O2 Cathodes in Sodium-Ion Batteries
Shuilin Wu et al.
ADVANCED ENERGY MATERIALS (2021)
Dual-Manipulation on P2-Na0.67Ni0.33Mn0.67O2 Layered Cathode toward Sodium-Ion Full Cell with Record Operating Voltage Beyond 3.5 V
Bo Peng et al.
ENERGY STORAGE MATERIALS (2021)
Sodium superionic conductor NaTi2(PO4)3 surface layer modified P2-type Na2/3Ni1/3Mn2/3O2 as high-performance cathode for sodium-ion batteries
Haiming Li et al.
JOURNAL OF POWER SOURCES (2021)
Tuning local chemistry of P2 layered-oxide cathode for high energy and long cycles of sodium-ion battery
Chenchen Wang et al.
NATURE COMMUNICATIONS (2021)
Development of cathode-electrolyte-interphase for safer lithium batteries
Yu Wu et al.
ENERGY STORAGE MATERIALS (2021)
Overcoming the rate-determining kinetics of the Na3V2O2(PO4)2F cathode for ultrafast sodium storage by heterostructured dual-carbon decoration
Xiangyi Li et al.
JOURNAL OF MATERIALS CHEMISTRY A (2021)
Investigations on the Fundamental Process of Cathode Electrolyte Interphase Formation and Evolution of High-Voltage Cathodes
Qinghao Li et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Enhancing the interfacial stability of P2-type cathodes by polydopamine-derived carbon coating for achieving performance improvement
Jiuyang Xia et al.
CARBON (2020)
Revealing High Na-Content P2-Type Layered Oxides as Advanced Sodium-Ion Cathodes
Chenglong Zhao et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)
Revisiting the Na2/3Ni1/3Mn2/3O2 Cathode: Oxygen Redox Chemistry and Oxygen Release Suppression
Yi Zhang et al.
ACS CENTRAL SCIENCE (2020)
Preferential occupation of Na in P3-type layered cathode material for sodium ion batteries
Li Zhang et al.
NANO ENERGY (2020)
The stability of P2-layered sodium transition metal oxides in ambient atmospheres
Wenhua Zuo et al.
NATURE COMMUNICATIONS (2020)
Strain engineering by atomic lattice locking in P2-type layered oxide cathode for high-voltage sodium-ion batteries
Ying Yang et al.
NANO ENERGY (2020)
Insights of the anionic redox in P2-Na0.67Ni0.33Mn0.67O2
Wenhua Zuo et al.
NANO ENERGY (2020)
Electrochemical Performance Optimization of Layered P2-Type Na0.67MnO2 through Simultaneous Mn-Site Doping and Nanostructure Engineering
Bo Peng et al.
BATTERIES & SUPERCAPS (2020)
The novel P3-type layered Na0.65Mn0.75Ni0.25O2 oxides doped by non-metallic elements for high performance sodium-ion batteries
Yu Wang et al.
CHEMICAL ENGINEERING JOURNAL (2019)
Recent Progress in Rechargeable Sodium-Ion Batteries: toward High-Power Applications
Xiangjun Pu et al.
SMALL (2019)
Improved cycle and air stability of P3-Na0.65Mn0.75Ni0.25O2 electrode for sodium-ion batteries coated with metal phosphates
Yu Wang et al.
CHEMICAL ENGINEERING JOURNAL (2019)
Na+-Conductive Na2Ti3O7-Modified P2-type Na2/3Ni1/3Mn2/3O2 via a Smart in Situ Coating Approach: Suppressing Na+/Vacancy Ordering and P2-O2 Phase Transition
Rongbin Dang et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Sodium‐Ion Batteries: O3‐Type Layered Ni‐Rich Oxide: A High‐Capacity and Superior‐Rate Cathode for Sodium‐Ion Batteries (Small 52/2019)
Jun Yang et al.
Small (2019)
A novel P3-type Na2/3Mg1/3Mn2/3O2 as high capacity sodium-ion cathode using reversible oxygen redox
Bohang Song et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
Designing In-Situ-Formed Interphases Enables Highly Reversible Cobalt-Free LiNiO2 Cathode for Li-ion and Li-metal Batteries
Tao Deng et al.
JOULE (2019)
CuO-Coated and Cu2+-doped Co-modified P2-type Na2/3[Ni1/3Mn2/3]O2 for sodium-ion batteries
Rongbin Dang et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2019)
Simultaneously tuning cationic and anionic redox in a P2-Na0.67Mn0.75Ni0.25O2 cathode material through synergic Cu/ Mg co- doping
Weijin Kong et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
P2-type Na2/3Ni1/3Mn2/3O2 as a cathode material with high-rate and long-life for sodium ion storage
Qiannan Liu et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
Structure-Performance Relationship of Zn2+ Substitution in P2-Na0.66Ni0.33Mn0.67O2 with Different Ni/Mn Ratios for High-Energy Sodium-Ion Batteries
Wenhua Zuo et al.
ACS APPLIED ENERGY MATERIALS (2019)
High Energy Density Sodium-Ion Battery with Industrially Feasible and Air-Stable O3-Type Layered Oxide Cathode
Jianqiu Deng et al.
ADVANCED ENERGY MATERIALS (2018)
Sodium-Ion Batteries: Building Effective Layered Cathode Materials with Long-Term Cycling by Modifying the Surface via Sodium Phosphate
Jae Hyeon Jo et al.
ADVANCED FUNCTIONAL MATERIALS (2018)
A high-capacity P2 Na2/3Ni1/3Mn2/3O2 cathode material for sodium ion batteries with oxygen activity
Tim Risthaus et al.
JOURNAL OF POWER SOURCES (2018)
Novel P2-type concentration-gradient Na0.67Ni0.167Co0.167Mn0.67O2 modified by Mn-rich surface as cathode material for sodium ion batteries
Shuo Bao et al.
JOURNAL OF POWER SOURCES (2018)
Simultaneous MgO coating and Mg doping of Na[Ni0.5Mn0.5]O-2 cathode: facile and customizable approach to high-voltage sodium-ion batteries
Jang-Yeon Hwang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2018)
Dynamic evolution of cathode electrolyte interphase (CEI) on high voltage LiCoO2 cathode and its interaction with Li anode
Jie-Nan Zhang et al.
ENERGY STORAGE MATERIALS (2018)
New insights into understanding the exceptional electrochemical performance of P2-type manganese-based layered oxide cathode for sodium ion batteries
Xiaobo Zheng et al.
ENERGY STORAGE MATERIALS (2018)
Designing Air-Stable O3-Type Cathode Materials by Combined Structure Modulation for Na-Ion Batteries
Hu-Rong Yao et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)
Exploring Oxygen Activity in the High Energy P2-Type Na0.78Ni0.23Mn0.69O2 Cathode Material for Na-Ion Batteries
Chuze Ma et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)
Copper-substituted Na0.67Ni0.3-xCuxMn0.7O2 cathode materials for sodium-ion batteries with suppressed P2-O2 phase transition
Lei Wang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
Insights into the Effects of Zinc Doping on Structural Phase Transition of P2-Type Sodium Nickel Manganese Oxide Cathodes for High-Energy Sodium Ion Batteries
Xuehang Wu et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
P2-Na2/3Ni1/3Mn5/9Al1/9O2 Microparticles as Superior Cathode Material for Sodium-Ion Batteries: Enhanced Properties and Mechanisam via Graphene Connection
Xiao-Hua Zhang et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Suppressing the P2-O2 Phase Transition of Na0.67Mn0.67Ni0.33O2 by Magnesium Substitution for Improved Sodium-Ion Batteries
Peng-Fei Wang et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2016)
High Voltage Mg-Doped Na0.67Ni0.3-xMgxMn0.7O2 (x=0.05, 0.1) Na-Ion Cathodes with Enhanced Stability and Rate Capability
Gurpreet Singh et al.
CHEMISTRY OF MATERIALS (2016)
Highly stable linear carbonate-containing electrolytes with fluoroethylene carbonate for high-performance cathodes in sodium-ion batteries
Yongwon Lee et al.
JOURNAL OF POWER SOURCES (2016)
Understanding sodium-ion diffusion in layered P2 and P3 oxides via experiments and first-principles calculations: a bridge between crystal structure and electrochemical performance (vol 8, e266, 2016)
Shaohua Guo et al.
NPG ASIA MATERIALS (2016)
Layered P2-Na2/3[Ni1/3Mn2/3]O2 as high-voltage cathode for sodium-ion batteries: The capacity decay mechanism and Al2O3 surface modification
Yihang Liu et al.
NANO ENERGY (2016)
P2-type Na0.66Ni0.33-xZnxMn0.67O2 as new high-voltage cathode materials for sodium-ion batteries
Xuehang Wu et al.
JOURNAL OF POWER SOURCES (2015)
P2-type Na2/3Ni1/3Mn2/3-xTixO2 as a new positive electrode for higher energy Na-ion batteries
Hiroaki Yoshida et al.
CHEMICAL COMMUNICATIONS (2014)
Identifying the Critical Role of Li Substitution in P2-Nax[LiyNizMn1-y-z]O2 (0 < x, y, z < 1) Intercalation Cathode Materials for High-Energy Na-Ion Batteries
Jing Xu et al.
CHEMISTRY OF MATERIALS (2014)
Cyclic carbonate based-electrolytes enhancing the electrochemical performance of Na4Fe3(PO4)2(P2O7) cathodes for sodium-ion batteries
Jun Yeong Jang et al.
ELECTROCHEMISTRY COMMUNICATIONS (2014)
P2-type Na0.67Mn0.65Fe0.2Ni0.15O2 Cathode Material with High-capacity for Sodium-ion Battery
Dingding Yuan et al.
ELECTROCHIMICA ACTA (2014)
Recent research progress on iron- and manganese-based positive electrode materials for rechargeable sodium batteries
Naoaki Yabuuchi et al.
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2014)
Water sensitivity of layered P2/P3-NaxNi0.22Co0.11Mn0.66O2 cathode material
Daniel Buchholz et al.
JOURNAL OF MATERIALS CHEMISTRY A (2014)
An advanced cathode for Na-ion batteries with high rate and excellent structural stability
Dae Hoe Lee et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2013)
Enabling Sodium Batteries Using Lithium-Substituted Sodium Layered Transition Metal Oxide Cathodes
Donghan Kim et al.
ADVANCED ENERGY MATERIALS (2011)
Share Paper
