4.8 Article

Molecular-Level Insight into the Interfacial Reactivity and Ionic Conductivity of a Li-Argyrodite Li6PS5Cl Solid Electrolyte at Bare and Coated Li-Metal Anodes

Related references

Note: Only part of the references are listed.
Review Chemistry, Multidisciplinary

Interface Issues and Challenges in All-Solid-State Batteries: Lithium, Sodium, and Beyond

Shuaifeng Lou et al.

Summary: This article discusses the interface principles and engineering in all-solid-state batteries, emphasizing the importance of interface physics and chemistry in battery performance, and proposing strategies to address technical challenges.

ADVANCED MATERIALS (2021)

Article Nanoscience & Nanotechnology

Visualizing Lithium Distribution and Degradation of Composite Electrodes in Sulfide-based All-Solid-State Batteries Using Operando Time-of-Flight Secondary Ion Mass Spectrometry

Yuji Yamagishi et al.

Summary: This study utilizes operando time-of-flight secondary ion mass spectrometry to observe Li distribution and degradation in composite cathodes during cell operation. The nonuniform reaction of NCA particles during charge and discharge cycles was successfully visualized, while degradation at the NCA/LPS interface was also investigated. The technique provides insights into the optimized structures of composite electrodes and mechanisms of interfacial degradation.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Chemistry, Physical

Influence of Aliovalent Cation Substitution and Mechanical Compression on Li-Ion Conductivity and Diffusivity in Argyrodite Solid Electrolytes

Parvin Adeli et al.

Summary: The study introduces dual-modified superionic conductors in the Li-argyrodite family prepared by a rapid synthesis method, showing improved Li+ diffusion and conductivity through aliovalent doping. The materials exhibit exceptional room temperature conductivity and diffusivity. Mechanical modification's impact on grain boundary diffusion in sulfide electrolytes was probed using PFG-NMR, highlighting the efficacy of particle-scale materials engineering modifications.

CHEMISTRY OF MATERIALS (2021)

Article Nanoscience & Nanotechnology

First-Principles Study of Microscopic Electrochemistry at the LiCoO2 Cathode/LiNbO3 Coating/β-Li3PS4 Solid Electrolyte Interfaces in an All-Solid-State Battery

Bo Gao et al.

Summary: The study introduces a potential energy profile for assessing Li+ interface and demonstrates the effectiveness of reducing Li+ transport resistance through interface coatings. Computational analysis suggests that the interface between LiCoO2 and LiNbO3 is highly disordered and electronically conductive.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Chemistry, Physical

Tunable Lithium-Ion Transport in Mixed-Halide Argyrodites Li6-xPS5-xClBrx: An Unusual Compositional Space

Sawankumar Patel et al.

Summary: This study introduces a new compositional space of argyrodite superionic conductors, Li6-xPS5-xClBrx [0 <= x <= 0.8], with high ionic conductivity and low lithium migration barrier. Bromination treatment can maintain the parent Li6PS5Cl structure within a certain range, leading to enhanced Li+ ion dynamics and a liquid-like Li sublattice. Halogen-rich compositions induce hypercoordination and coordination entropy, enhancing Li+ ion transport in the material.

CHEMISTRY OF MATERIALS (2021)

Article Chemistry, Physical

Lithium solid-state batteries: State-of-the-art and challenges for materials, interfaces and processing

Nicola Boaretto et al.

Summary: Lithium solid-state batteries (SSBs) are seen as a potential solution to safety concerns and energy density limitations in lithium-ion batteries, with recent advances in materials like highly-conductive solid-state electrolytes. Research focus has shifted to integrating components, full cell functionality, and scalability of fabrication processes, but formidable challenges remain. Key points include the importance of full cell integration, material selection, and compatible processing techniques to stabilize and minimize resistance in cell interfaces.

JOURNAL OF POWER SOURCES (2021)

Article Chemistry, Physical

Optimization of lithium ion conductivity of Li2S-P2S5 glass ceramics by microstructural control of crystallization kinetics

Shutong Lu et al.

Summary: By investigating microstructural control based on crystallization kinetics, the Li ion conductivity in a glass-ceramic solid electrolyte improved significantly. This approach optimized heat treatment conditions to achieve a conductivity of 1.33 x 10(-3) S cm(-1) at room temperature, enhancing the performance of 75Li(2)S center dot 25P(2)S(5) glass-ceramics. The formation of a fast ion-conducting network was discussed using the effective medium theory, providing an effective preparation route for all-solid Li-ion batteries.

SOLID STATE IONICS (2021)

Article Chemistry, Physical

Doping effects of metal cation on sulfide solid electrolyte/lithium metal interface

Zhixuan Wang et al.

Summary: This study investigates the effects of doping sulfide solid electrolytes with various elements on the interface between the electrolyte and lithium metal. It found that the doping of MoS2 can promote ion conduction but also accelerate the thickening of the SEI and growth of Li dendrites, providing important insights for the selection of solid electrolyte dopants and interface construction.

NANO ENERGY (2021)

Article Green & Sustainable Science & Technology

Impact of Solvent Treatment of the Superionic Argyrodite Li6PS5Cl on Solid-State Battery Performance

Justine Ruhl et al.

Summary: While treatment of the superionic solid electrolyte Li6PS5Cl with certain organic solvents may not result in obvious degradation, it can have a significant impact on the performance of solid-state batteries, indicating a need for further study to understand these underlying effects.

ADVANCED ENERGY AND SUSTAINABILITY RESEARCH (2021)

Review Chemistry, Physical

Protective coatings for lithium metal anodes: Recent progress and future perspectives

Hongyao Zhou et al.

JOURNAL OF POWER SOURCES (2020)

Article Nanoscience & Nanotechnology

Understanding the Lifetime of Battery Cells Based on Solid-State Li6PS5Cl Electrolyte Paired with Lithium Metal Electrode

Ruth Schlenker et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Review Chemistry, Multidisciplinary

Physicochemical Concepts of the Lithium Metal Anode in Solid-State Batteries

Thorben Krauskopf et al.

CHEMICAL REVIEWS (2020)

Article Nanoscience & Nanotechnology

Ionic Conduction through Reaction Products at the Electrolyte-Electrode Interface in All-Solid-State Li+ Batteries

Chuhong Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Chemistry, Physical

Interphase Morphology between a Solid-State Electrolyte and Lithium Controls Cell Failure

John A. Lewis et al.

ACS ENERGY LETTERS (2019)

Review Nanoscience & Nanotechnology

Interface in Solid-State Lithium Battery: Challenges, Progress, and Outlook

Syed Atif Peryez et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Multidisciplinary Sciences

The Ab Initio Calculations on the Areal Specific Resistance of Li-Metal/Li7La3Zr2O12 Interphase

Jian Goo et al.

ADVANCED THEORY AND SIMULATIONS (2019)

Article Chemistry, Physical

Computational Screening of Cathode Coatings for Solid-State Batteries

Yihan Xiao et al.

JOULE (2019)

Review Chemistry, Multidisciplinary

New horizons for inorganic solid state ion conductors

Zhizhen Zhang et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Article Chemistry, Physical

Exploring interfacial stability of solid-state electrolytes at the lithium-metal anode surface

Luis E. Camacho-Forero et al.

JOURNAL OF POWER SOURCES (2018)

Review Electrochemistry

Review-Practical Challenges Hindering the Development of Solid State Li Ion Batteries

Kian Kerman et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

Article Electrochemistry

Elastic Properties of Alkali Superionic Conductor Electrolytes from First Principles Calculations

Zhi Deng et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)

Editorial Material Energy & Fuels

A solid future for battery development

Juergen Janek et al.

NATURE ENERGY (2016)

Article Materials Science, Multidisciplinary

Exploring stereographic surface energy maps of cubic metals via an effective pair-potential approach

Su-Hyun Yoo et al.

PHYSICAL REVIEW B (2016)

Article Chemistry, Physical

Solid Electrolyte: the Key for High-Voltage Lithium Batteries

Juchuan Li et al.

ADVANCED ENERGY MATERIALS (2015)

Article Computer Science, Interdisciplinary Applications

CRITIC2: A program for real-space analysis of quantum chemical interactions in solids

A. Otero-de-la-Roza et al.

COMPUTER PHYSICS COMMUNICATIONS (2014)

Article Chemistry, Multidisciplinary

A sulphide lithium super ion conductor is superior to liquid ion conductors for use in rechargeable batteries

Yoshikatsu Seino et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Article Materials Science, Multidisciplinary

Python Materials Genomics (pymatgen): A robust, open-source python library for materials analysis

Shyue Ping Ong et al.

COMPUTATIONAL MATERIALS SCIENCE (2013)

Article Multidisciplinary Sciences

Sulfide Solid Electrolyte with Favorable Mechanical Property for All-Solid-State Lithium Battery

Atsushi Sakuda et al.

SCIENTIFIC REPORTS (2013)

Article Nanoscience & Nanotechnology

Commentary: The Materials Project: A materials genome approach to accelerating materials innovation

Anubhav Jain et al.

APL MATERIALS (2013)

Article Chemistry, Physical

A lithium superionic conductor

Noriaki Kamaya et al.

NATURE MATERIALS (2011)

Article Chemistry, Physical

Structural change of Li2S-P2S5 sulfide solid electrolytes in the atmosphere

Hiromasa Muramatsu et al.

SOLID STATE IONICS (2011)

Article Physics, Condensed Matter

A grid-based Bader analysis algorithm without lattice bias

W. Tang et al.

JOURNAL OF PHYSICS-CONDENSED MATTER (2009)

Article Chemistry, Multidisciplinary

Li6PS5X: A class of crystalline Li-rich solids with an unusually high Li+ mobility

Hans-Joerg Deiseroth et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2008)

Article Chemistry, Physical

A climbing image nudged elastic band method for finding saddle points and minimum energy paths

G Henkelman et al.

JOURNAL OF CHEMICAL PHYSICS (2000)