Related references
Note: Only part of the references are listed.Exploring halide destabilised calcium hydride as a high-temperature thermal battery
M. Veronica Sofianos et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Materials for hydrogen-based energy storage - past, recent progress and future outlook
Michael Hirscher et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Destabilized Calcium Hydride as a Promising High-Temperature Thermal Battery
Sruthy Balakrishnan et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2020)
An experimental high temperature thermal battery coupled to a low temperature metal hydride for solar thermal energy storage
Lucas Poupin et al.
SUSTAINABLE ENERGY & FUELS (2020)
Thermal properties of thermochemical heat storage materials
Julianne E. Bird et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2020)
Magnesium based materials for hydrogen based energy storage: Past, present and future
V. A. Yartys et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)
A review on the role, cost and value of hydrogen energy systems for deep decarbonisation
David Parra et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2019)
First Hydrogenation Enhancement in TiFe Alloys for Hydrogen Storage Doped with Yttrium
Catherine Gosselin et al.
METALS (2019)
Methods for accurate high-temperature Sieverts-type hydrogen measurements of metal hydrides
Drew A. Sheppard et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Future perspectives of thermal energy storage with metal hydrides
Kandavel Manickam et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)
One-dimensional metal-hydride tank model and simulation in Matlab-Simulink
Z. Abdin et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)
Hydrogen-induced phase transition of MgZrTiFe0.5Co0.5Ni0.5 high entropy alloy
G. Zepon et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)
Study of cyclic performance of V-Ti-Cr alloys employed for hydrogen compressor
Suganthamalar Selvaraj et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)
Cycling stability of RNi5 (R = La, La plus Ce) hydrides during the operation of metal hydride hydrogen compressor
Boris P. Tarasov et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)
Mechanical activation of TiFe for hydrogen storage by cold rolling under inert atmosphere
L. E. R. Vega et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)
Effect of gradient-structure versus uniform nanostructure on hydrogen storage of Ti-V-Cr alloys: Investigation using ultrasonic SMAT and HPT processes
Kaveh Edalati et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Synthesis, Morphology, and Hydrogen Absorption Properties of TiVMn and TiCrMn Nanoalloys with a FCC Structure
Bo Li et al.
SCANNING (2018)
Rational Design of Nanosized Light Elements for Hydrogen Storage: Classes, Synthesis, Characterization, and Properties
Qiwen Lai et al.
ADVANCED MATERIALS TECHNOLOGIES (2018)
Ammonia for power
A. Valera-Medina et al.
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2018)
Mechanical activation of air exposed TiFe+4 wt% Zr alloy for hydrogenation by cold rolling and ball milling
Joydev Manna et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)
Induction melted AB2-type metal hydrides for hydrogen storage and compression applications
Lydia Pickering et al.
MATERIALS TODAY-PROCEEDINGS (2018)
Tailoring magnesium based materials for hydrogen storage through synthesis: Current state of the art
Yahui Sun et al.
ENERGY STORAGE MATERIALS (2018)
Hydrogenation improvement of TiFe by adding ZrMn2
Peng Lv et al.
ENERGY (2017)
Heat transfer techniques in metal hydride hydrogen storage: A review
Mahvash Afzal et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
Modeling of a thermal energy storage system based on coupled metal hydrides (magnesium iron - sodium alanate) for concentrating solar power plants
A. d'Entremont et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
Potential high-Tc superconducting lanthanum and yttrium hydrides at high pressure
Hanyu Liu et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2017)
The use of metal hydrides in fuel cell applications
Mykhaylo V. Lototskyy et al.
PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2017)
Thermal energy storage systems for concentrated solar power plants
Ugo Pelay et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)
The use of metal hydrides in fuel cell applications
Mykhaylo V. Lototskyy et al.
PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2017)
Metal hydrides for concentrating solar thermal power energy storage
D. A. Sheppard et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2016)
Miedema Calculator: A thermodynamic platform for predicting formation enthalpies of alloys within framework of Miedema's Theory
R. F. Zhang et al.
COMPUTER PHYSICS COMMUNICATIONS (2016)
Activation of titanium-vanadium alloy for hydrogen storage by introduction of nanograins and edge dislocations using high-pressure torsion
Kaveh Edalati et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)
The kinetics of lightweight solid-state hydrogen storage materials: A review
Nurul Zafirah Abd. Khalim Khafidz et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)
A review of mathematical modelling of metal-hydride systems for hydrogen storage applications
S. S. Mohammadshahi et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)
Different reactor and heat exchanger configurations for metal hydride hydrogen storage systems - A review
Shahin Shafiee et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)
Thermal coupling of PEM fuel cell and metal hydride hydrogen storage using heat pipes
Anggito P. Tetuko et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)
A review on the current progress of metal hydrides material for solid-state hydrogen storage applications
N. A. A. Rusman et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)
Impact of severe plastic deformation on microstructure and hydrogen storage of titanium-iron-manganese intermetallics
Kaveh Edalati et al.
SCRIPTA MATERIALIA (2016)
Superior hydrogen storage in high entropy alloys
Martin Sahlberg et al.
SCIENTIFIC REPORTS (2016)
Hydrogen storage performance of TiFe after processing by ball milling
Hoda Emami et al.
ACTA MATERIALIA (2015)
Significance of grain boundaries and stacking faults on hydrogen storage properties of Mg2Ni intermetallics processed by high-pressure torsion
Toshifumi Hongo et al.
ACTA MATERIALIA (2015)
Hydrogen Storage Materials for Mobile and Stationary Applications: Current State of the Art
Qiwen Lai et al.
CHEMSUSCHEM (2015)
Generalized computational model for high-pressure metal hydrides with variable thermal properties
Andrea Mazzucco et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)
Cyclic hydrogenation stability of γ-hydrides for Ti25V35Cr40 alloys doped with carbon
Chia-Chieh Shen et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Performance analysis of cylindrical metal hydride beds with various heat exchange options
B. Satya Sekhar et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Integration of a PEM fuel cell with a metal hydride tank for stationary applications
P. Rizzi et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Activation of TiFe for hydrogen storage by plastic deformation using groove rolling and high-pressure torsion: Similarities and differences
Kaueh Edalati et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2014)
Bed geometries, fueling strategies and optimization of heat exchanger designs in metal hydride storage systems for automotive applications: A review
Andrea Mazzucco et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2014)
Stability of LaNi5-xSnx cycled in hydrogen
E. M. Borzone et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2014)
Screening analysis of metal hydride based thermal energy storage systems for concentrating solar power plants
Claudio Corgnale et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2014)
Structure and hydrogen storage properties of a high entropy ZrTiVCrFeNi alloy synthesized using Laser Engineered Net Shaping (LENS)
I. Kunce et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2013)
Hydrogen from renewable electricity: An international review of power-to-gas pilot plants for stationary applications
Gerda Gahleitner
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2013)
Effect of partial niobium and iron substitution on short-term cycle durability of hydrogen storage Ti-Cr-V alloys
Shin-ichi Towata et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2013)
Coupling and thermal integration of a solid oxide fuel cell with a magnesium hydride tank
Baptiste Delhomme et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2013)
Metal hydride material requirements for automotive hydrogen storage systems
Jose Miguel Pasini et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2013)
Development of Ti-Cr-Mn-Fe based alloys with high hydrogen desorption pressures for hybrid hydrogen storage vessel application
Zhiwen Chen et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2013)
High-pressure torsion of TiFe intermetallics for activation of hydrogen storage at room temperature with heterogeneous nanostructure
Kaveh Edalati et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2013)
McPhy-Energy's proposal for solid state hydrogen storage materials and systems
Michel Jehan et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2013)
Metal hydride bed system model for renewable source driven Regenerative Fuel Cell
Claudio Corgnale et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2013)
Investigation of thermal conductivity enhancement in bakelite-graphite particulate filled polymeric composite
Sajjad Azeem et al.
INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE (2012)
Selective hydrogen absorption from gaseous mixtures by BCC Ti-V alloys
S. Suwarno et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2012)
PV output power fluctuations smoothing: The MYRTE platform experience
C. Darras et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2012)
Hydrogen sorption properties of compounds based on BCC Ti1 - xV1 - yCr1 + x + y alloys
S. Miraglia et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2012)
Thermodynamic Modeling of the Li-H and Ca-H Systems
Man Wang et al.
JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION (2012)
Characteristic study on fuel cell/battery hybrid power system on a light electric vehicle
Jenn Jiang Hwang et al.
JOURNAL OF POWER SOURCES (2012)
Assessment on the long term performance of a LaNi5 based hydrogen storage system
Fusheng Yang et al.
WHEC 2012 CONFERENCE PROCEEDINGS - 19TH WORLD HYDROGEN ENERGY CONFERENCE (2012)
MgH2 intermediate scale tank tests under various experimental conditions
S. Garrier et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2011)
Surface modification of TiFe hydrogen storage alloy by metal-organic chemical vapour deposition of palladium
Moegamat Wafeeq Davids et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2011)
Advanced hydrogen storage alloys for Ni/MH rechargeable batteries
Yongfeng Liu et al.
JOURNAL OF MATERIALS CHEMISTRY (2011)
Automation infrastructure and operation control strategy in a stand-alone power system based on renewable energy sources
Chrysovalantou Ziogou et al.
JOURNAL OF POWER SOURCES (2011)
Li-ion batteries from LiFePO4 cathode and anatase/graphene composite anode for stationary energy storage
Daiwon Choi et al.
ELECTROCHEMISTRY COMMUNICATIONS (2010)
Experimental study of a metal hydride vessel based on a finned spiral heat exchanger
H. Dhaou et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)
Hydrogen storage properties of multi-principal-component CoFeMnTixVyZrz alloys
Yih-Farn Kao et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)
Hydrogen: the future energy carrier
Andreas Zuettel et al.
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2010)
Optimized heat transfer fin design for a metal-hydride hydrogen storage container
M. Melnichuk et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2009)
Thermal integration of a metal hydride storage unit and a PEM fuel cell stack
T. Forde et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2009)
Hydrogen storage in metal hydride tanks equipped with metal foam heat exchanger
S. Mellouli et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2009)
Optimization of hydrogen storage in metal-hydride tanks
F. Askri et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2009)
Power management strategies for a stand-alone power system using renewable energy sources and hydrogen storage
Dimitris Ipsakis et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2009)
High Temperature Metal Hydrides as Heat Storage Materials for Solar and Related Applications
Michael Felderhoff et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2009)
Characterization of thermal cross-talk in a MEMS-based thermopile detector array
H. Wu et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2009)
Three-dimensional modeling of hydrogen sorption in metal hydride hydrogen storage beds
Yun Wang et al.
JOURNAL OF POWER SOURCES (2009)
Electronic structure and energetics of the tetragonal distortion for TiH2, ZrH2, and HfH2: A first-principles study
Ramiro Quijano et al.
PHYSICAL REVIEW B (2009)
Pulverization, expansion of La0.6Y0.4Ni4.8Mn0.2 during hydrogen absorption-desorption cycles and their influences in thin-wall reactors
F. Qin et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2008)
Properties of hydrogen absorption by nano-structured FeTi alloys
Takeshi Haraki et al.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH (2008)
Hydrogenation properties and microstructure of Ti-Mn-based alloys for hybrid hydrogen storage vessel
Masachika Shibuya et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2008)
Synthesis, phase transformation, and hydrogen storage properties of ball-milled TiV0.9Mn1.1
J. Huot et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2008)
Comparing the hydrogen storage alloys - TiCrV and vanadium-rich TiCrMnV
Jian-Yih Wang et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2007)
Hydrogen absorption of TiFe alloy synthesized by ball milling and post-annealing
M. Abe et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2007)
Hydriding combustion synthesis of TiFe
I. Saita et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2007)
A novel design of a heat exchanger for a metal-hydrogen reactor
S. Mellottli et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2007)
Synthesis of Ti-Fe alloys by mechanical alloying
Hideki Hotta et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2007)
Metal hydride materials for solid hydrogen storage: A review
Billur Sakintuna et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2007)
Size effects on the hydrogen storage properties of nanostructured metal hydrides:: A review
Vincent Berube et al.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2007)
Measurement and modelling of kinetics of hydrogen sorption by LaNi5 and two related pseudobinary compounds
H. Dhaou et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2007)
Fuel cell vehicles: Status 2007
Rittmar von Helmolt et al.
JOURNAL OF POWER SOURCES (2007)
Hydrogen absorption-desorption properties of Ti0.32Cr0.43V0.25 alloy
Sung-Wook Cho et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2007)
A thermally coupled metal hydride hydrogen storage and fuel cell system
Brendan D. MacDonald et al.
JOURNAL OF POWER SOURCES (2006)
Development of metal hydride with high dissociation pressure
Yoshitsugu Kojima et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2006)
Influence of Fe addition on hydrogen storage characteristics of Ti-V-based alloy
X. B. Yu et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2006)
Review on hydrogen absorbing materials - structure, microstructure, and thermodynamic properties
M Bououdina et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2006)
Vanadium-based BCC alloys: phase-structural characteristics and hydrogen sorption properties
MV Lototsky et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2005)
On the cyclic hydrogenation stability of an Lm(NiAl)5-based alloy with different hydrogen loadings
CC Shen et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2005)
Hydrogen storage materials for fuel cell vehicles high-pressure MH system
D Mori et al.
JOURNAL OF THE JAPAN INSTITUTE OF METALS (2005)
Influence of thermal annealing on the hydrogenation properties of mechanically milled AB5-type alloys
JR Ares et al.
MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY (2004)
Hydrogenation properties and structure of Ti-Cr alloy prepared by mechanical grinding
N Takeichi et al.
MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY (2004)
Studies on improvement of hydrogen storage capacity of AB5 type:: MmNi4.6Fe0.4 alloy
A Singh et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2004)
Enhancement of hydrogen storage capacity of Ti-V-Cr-MnBCC phase alloys
XB Yu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2004)
Structural and hydrogenation properties of an 80wt% TiCr1.1V0.9-20wt% LaNi5 composite material
DS dos Santos et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2003)
Electronic properties of LaNi4.75Sn0.25, LaNi4.5M0.5 (M=Si, Ge, Sn), LaNi4.5Sn0.5H5
JC Crivello et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2003)
Hydrogen effects on deformation and fracture: Science and sociology
HK Birnbaum
MRS BULLETIN (2003)
Hydrogen storage properties of vanadium-based b.c.c. solid solution metal hydrides
CY Seo et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2003)
Effect of surface modification by ion implantation on hydrogenation property of TiFe alloy
T Suda et al.
MATERIALS TRANSACTIONS (2002)
A structural study of the homogeneity domain of LaNi5
JM Joubert et al.
JOURNAL OF SOLID STATE CHEMISTRY (2002)
Effect of mechanical grinding under Ar and H2 atmospheres on structural and hydriding properties in LaNi5
H Fujii et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2002)
Lattice defects introduced during hydrogen absorption-desorption cycles and their effects on P-C characteristics in some intermetallic compounds
H Inui et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2002)
Ti-V-Cr b.c.c. alloys with high protium content
M Okada et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2002)
GHz microwave absorption of a fine α-Fe structure produced by the disproportionation of Sm2Fe17 in hydrogen
S Sugimoto et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2002)
Metal hydride compacts of improved thermal conductivity
KJ Kim et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2001)
Mechanical alloying and hydrogen storage properties of CaNi5-based alloys
G Liang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2001)
Hydrogen storage properties of the mechanically alloyed LaNi5-based materials
G Liang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2001)
Catalytic generation of hydrogen by applying fluorinated-metal hydrides as catalysts
S Suda et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2001)
Hydriding characteristics of zirconium-substituted FeTi
N Nishimiya et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2000)
Hydrogen storage for fuel cell systems with stationary applications -: I.: Transient measurement technique for packed bed evaluation
S Lévesque et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2000)