Related references
Note: Only part of the references are listed.Construction of tantalum/poly(ether imide) coatings on magnesium implants with both corrosion protection and osseointegration properties
Kwang-Hee Cheon et al.
BIOACTIVE MATERIALS (2021)
Vitamin D3 Release from Traditionally and Additively Manufactured Tricalcium Phosphate Bone Tissue Engineering Scaffolds
Ashley A. Vu et al.
ANNALS OF BIOMEDICAL ENGINEERING (2020)
The enhancement of hydroxyapatite thermal stability by Al doping
M. A. Goldberg et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Biodegradable bone implants in orthopedic applications: a review
Girish Chandra et al.
BIOCYBERNETICS AND BIOMEDICAL ENGINEERING (2020)
Development of novel 3D scaffolds using BioExtruder by varying the content of hydroxyapatite and silica in PCL matrix for bone tissue engineering
Nandini A. Pattanashetti et al.
JOURNAL OF POLYMER RESEARCH (2020)
Porous calcium phosphate-collagen composite microspheres for effective growth factor delivery and bone tissue regeneration
Yun-Jeong Seong et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)
Enhanced Bioactivity of Micropatterned Hydroxyapatite Embedded Poly(L-lactic) Acid for a Load-Bearing Implant
Sae-Mi Kim et al.
POLYMERS (2020)
Study on antibacterial properties and cytocompatibility of EPL coated 3D printed PCL/HA composite scaffolds
Lijiao Tian et al.
RSC ADVANCES (2020)
3D printed PCL/SrHA scaffold for enhanced bone regeneration
Dinghua Liu et al.
CHEMICAL ENGINEERING JOURNAL (2019)
Carbon Fiber Reinforced PEEK Composites Based on 3D-Printing Technology for Orthopedic and Dental Applications
Xingting Han et al.
JOURNAL OF CLINICAL MEDICINE (2019)
3D-printed PCL/bioglass (BGS-7) composite scaffolds with high toughness and cell-responses for bone tissue regeneration
YongBok Kim et al.
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2019)
Enhanced bioactivity of titanium-coated polyetheretherketone implants created by a high-temperature 3D printing process
Hyun-Do Jung et al.
BIOFABRICATION (2019)
Preparation and characterization of PLA/PCL/HA composite scaffolds using indirect 3D printing for bone tissue engineering
Shadi Hassanajili et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)
Biomimetic porous Mg with tunable mechanical properties and biodegradation rates for bone regeneration
Min-Ho Kang et al.
ACTA BIOMATERIALIA (2019)
Fabrication of strong, bioactive vascular grafts with PCL/collagen and PCL/silica bilayers for small-diameter vascular applications
Suhyung Park et al.
MATERIALS & DESIGN (2019)
Biomaterials for bone tissue engineering scaffolds: a review
Huawei Qu et al.
RSC ADVANCES (2019)
Three dimensional printed calcium phosphate and poly(caprolactone) composites with improved mechanical properties and preserved microstructure
Joseph B. Vella et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2018)
Preparation of dexamethasone-loaded biphasic calcium phosphate nanoparticlesicollagen porous composite scaffolds for bone tissue engineering
Ying Chen et al.
ACTA BIOMATERIALIA (2018)
A graphene oxide-Ag co-dispersing nanosystem: Dual synergistic effects on antibacterial activities and mechanical properties of polymer scaffolds
Cijun Shuai et al.
CHEMICAL ENGINEERING JOURNAL (2018)
New composite materials prepared by calcium phosphate precipitation in chitosan/collagen/hyaluronic acid sponge cross-linked by EDC/NHS
B. Kaczmarek et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2018)
In vitro and in vivo evaluation of polylactic acid-based composite with tricalcium phosphate microsphere for enhanced biodegradability and osseointegration
Da Yong Shin et al.
JOURNAL OF BIOMATERIALS APPLICATIONS (2018)
Effect of micropores on the microstructure and mechanical properties of porous Cu-Sn-Ti composites
Biao Zhao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Mechanobiologically optimized 3D titanium-mesh scaffolds enhance bone regeneration in critical segmental defects in sheep
Anne-Marie Pobloth et al.
SCIENCE TRANSLATIONAL MEDICINE (2018)
Preliminary Investigation of Poly-Ether-Ether-Ketone Based on Fused Deposition Modeling for Medical Applications
Feng Zhao et al.
MATERIALS (2018)
Development of three-dimensional printing polymer-ceramic scaffolds with enhanced compressive properties and tuneable resorption
Zuoxin Zhou et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2018)
Novel Biomaterials Used in Medical 3D Printing Techniques
Karthik Tappa et al.
JOURNAL OF FUNCTIONAL BIOMATERIALS (2018)
Surface immobilization of biphasic calcium phosphate nanoparticles on 3D printed poly(caprolactone) scaffolds enhances osteogenesis and bone tissue regeneration
Kyu-Sik Shim et al.
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2017)
Biphasic calcium phosphates bioceramics (HA/TCP): Concept, physicochemical properties and the impact of standardization of study protocols in biomaterials research
Mehdi Ebrahimi et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
Preparation of polymer/calcium phosphate porous composite as bone tissue scaffolds
Zhuo Kang et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
Comparison of 3D-Printed Poly-ε-Caprolactone Scaffolds Functionalized with Tricalcium Phosphate, Hydroxyapatite, Bio-Oss, or Decellularized Bone Matrix
Ethan Nyberg et al.
TISSUE ENGINEERING PART A (2017)
Controlled dual delivery of low doses of BMP-2 and VEGF in a silk fibroin-nanohydroxyapatite scaffold for vascularized bone regeneration
Qiang Wang et al.
JOURNAL OF MATERIALS CHEMISTRY B (2017)
Three dimensional electrospun PCL/PLA blend nanofibrous scaffolds with significantly improved stem cells osteogenic differentiation and cranial bone formation
Qingqing Yao et al.
BIOMATERIALS (2017)
Production of Poly(ε-Caprolactone)/Hydroxyapatite Composite Scaffolds with a Tailored Macro/Micro-Porous Structure, High Mechanical Properties, and Excellent Bioactivity
Jong-Woo Kim et al.
MATERIALS (2017)
Comparative Efficacies of Collagen-Based 3D Printed PCL/PLGA/β-TCP Composite Block Bone Grafts and Biphasic Calcium Phosphate Bone Substitute for Bone Regeneration
Kyoung-Sub Hwang et al.
MATERIALS (2017)
Fabrication of PCL/β-TCP scaffolds by 3D mini-screw extrusion printing
J. L. Davila et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2016)
Reinforcement of polyetheretherketone polymer with titanium for improved mechanical properties and in vitro biocompatibility
Hyun-Do Jung et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2016)
Importance of dual delivery systems for bone tissue engineering
Mehdi Farokhi et al.
JOURNAL OF CONTROLLED RELEASE (2016)
Enhancement of mechanical properties of 3D printed hydroxyapatite by combined low and high molecular weight polycaprolactone sequential infiltration
Jintamai Suwanprateeb et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2016)
Intrinsic Stresses in Thin Glassy Polymer Films Revealed by Crack Formation
Mithun Chowdhury et al.
MACROMOLECULES (2016)
Biodegradable polymer scaffolds
Shan-hui Hsu et al.
JOURNAL OF MATERIALS CHEMISTRY B (2016)
Combination of fused deposition modeling and gas foaming technique to fabricated hierarchical macro/microporous polymer scaffolds
Changchun Zhou et al.
MATERIALS & DESIGN (2016)
Biomaterial strategies for engineering implants for enhanced osseointegration and bone repair
Rachit Agarwal et al.
ADVANCED DRUG DELIVERY REVIEWS (2015)
Novel strategy for mechanically tunable and bioactive metal implants
Hyun-Do Jung et al.
BIOMATERIALS (2015)
Bone fracture healing: Cell therapy in delayed unions and nonunions
Enrique Gomez-Barrena et al.
BONE (2015)
Chondrogenic Regeneration Using Bone Marrow Clots and a Porous Polycaprolactone-Hydroxyapatite Scaffold by Three-Dimensional Printing
Qingqiang Yao et al.
TISSUE ENGINEERING PART A (2015)
Fabrication of Mechanically Tunable and Bioactive Metal Scaffolds for Biomedical Applications
Hyun-Do Jung et al.
JOVE-JOURNAL OF VISUALIZED EXPERIMENTS (2015)
Robocasting nanocomposite scaffolds of poly(caprolactone)/hydroxyapatite incorporating modified carbon nanotubes for hard tissue reconstruction
Biligzaya Dorj et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2013)
Improvement of the compressive strength of a cuttlefish bone-derived porous hydroxyapatite scaffold via polycaprolactone coating
Beom-Su Kim et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2013)
Production and bio-corrosion resistance of porous magnesium with hydroxyapatite coating for biomedical applications
Min-Ho Kang et al.
MATERIALS LETTERS (2013)
Bone tissue engineering using 3D printing
Susmita Bose et al.
MATERIALS TODAY (2013)
Fabrication, characterisation and biological activity of phlorotannin-conjugated PCL/beta-TCP composite scaffolds for bone tissue regeneration
MyungGu Yeo et al.
JOURNAL OF MATERIALS CHEMISTRY (2012)
Fabrication of porous polycaprolactone/hydroxyapatite (PCL/HA) blend scaffolds using a 3D plotting system for bone tissue engineering
Su A. Park et al.
BIOPROCESS AND BIOSYSTEMS ENGINEERING (2011)
Enhanced mechanical performance and biological evaluation of a PLGA coated β-TCP composite scaffold for load-bearing applications
Yunqing Kang et al.
EUROPEAN POLYMER JOURNAL (2011)
The influence hydroxyapatite nanoparticle shape and size on the properties of biphasic calcium phosphate scaffolds coated with hydroxyapatite-PCL composites
Seyed-Iman Roohani-Esfahani et al.
BIOMATERIALS (2010)
Bone Tissue Engineering: A Review in Bone Biomimetics and Drug Delivery Strategies
Joshua R. Porter et al.
BIOTECHNOLOGY PROGRESS (2009)
Effect of surface roughness on initial responses of osteoblast-like cells on two types of zirconia
Daisuke Yamashita et al.
DENTAL MATERIALS JOURNAL (2009)
Fabrication of Freeform Bone-Filling Calcium Phosphate Ceramics by Gypsum 3D Printing Method
Rungnapa Lowmunkong et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2009)
A review on biodegradable polymeric materials for bone tissue engineering applications
Muhammad Iqbal Sabir et al.
JOURNAL OF MATERIALS SCIENCE (2009)
Fracture of ceramics
Robert Danzer et al.
ADVANCED ENGINEERING MATERIALS (2008)
Effect of porosity and pore size on microstructures and mechanical proper-ties of poly-ε-caprolactone-hydroxyapatite composites
Haiying Yu et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2008)
The thermal stability of hydroxyapatite in biphasic calcium phosphate ceramics
R. W. N. Nilen et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2008)
Fabrication of three-dimensional polycaprolactone/hydroxyapatite tissue scaffolds and osteoblast-scaffold interactions in vitro
Lauren Shor et al.
BIOMATERIALS (2007)
In vitro bone engineering based on polycaprolactone and polycaprolactone-tricalcium phosphate composites
Yefang Zhou et al.
POLYMER INTERNATIONAL (2007)
Biodegradable polymers applied in tissue engineering research: a review
Monique Martina et al.
POLYMER INTERNATIONAL (2007)
Porogen-based solid freeform fabrication of polycaprolactone-calcium phosphate scaffolds for tissue engineering
Mark J. Mondrinos et al.
BIOMATERIALS (2006)
Biodegradable and bioactive porous polymer/inorganic composite scaffolds for bone tissue engineering
K Rezwan et al.
BIOMATERIALS (2006)
Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering
JM Williams et al.
BIOMATERIALS (2005)
Porous scaffold design for tissue engineering
SJ Hollister
NATURE MATERIALS (2005)
Microstructure and mechanical behavior of porous sintered steels
N Chawla et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Dissolution of calcium-deficient hydroxyapatite synthesized at different conditions
E Mavropoulos et al.
MATERIALS CHARACTERIZATION (2003)
Mechanism of the solid-state transformation of a calcium-deficient hydroxyapatite (CDHA) into biphasic calcium phosphate (BCP) at elevated temperatures
EI Dorozhkina et al.
CHEMISTRY OF MATERIALS (2002)
A biodegradable polymer as a cytokine delivery system for inducing bone formation
N Saito et al.
NATURE BIOTECHNOLOGY (2001)