Related references
Note: Only part of the references are listed.Microstructural control in metal laser powder bed fusion additive manufacturing using laser beam shaping strategy
Rongpei Shi et al.
ACTA MATERIALIA (2020)
Influence of Gas Flow Speed on Laser Plume Attenuation and Powder Bed Particle Pickup in Laser Powder Bed Fusion
Haopeng Shen et al.
JOM (2020)
Effect of processing parameters on forming defects during selective laser melting of AlSi10Mg powder
Haihua Wu et al.
RAPID PROTOTYPING JOURNAL (2020)
Effects of laser scanning speeds on different states of the molten pool during selective laser melting: Simulation and experiment
Weihao Yuan et al.
MATERIALS & DESIGN (2020)
Texture control of 316L parts by modulation of the melt pool morphology in selective laser melting
Olivier Andreau et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
In-situ high-speed X-ray imaging of piezo-driven directed energy deposition additive manufacturing
Sarah J. Wolff et al.
SCIENTIFIC REPORTS (2019)
Dynamics of pore formation during laser powder bed fusion additive manufacturing
Aiden A. Martin et al.
NATURE COMMUNICATIONS (2019)
Simulation of Laser-assisted Directed Energy Deposition of Aluminum Powder: Prediction of Geometry and Temperature Evolution
Fabrizia Caiazzo et al.
MATERIALS (2019)
Effect of Oxygen Addition on the Formation of α Martensite and Athermal ω in Ti-Nb Alloys
Sota Kawano et al.
MATERIALS TRANSACTIONS (2019)
Material defects as cause for the fatigue failure of metallic components
U. Zerbst et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
A Comprehensive Study of Steel Powders (316L, H13, P20 and 18Ni300) for Their Selective Laser Melting Additive Manufacturing
Jujie Yan et al.
METALS (2019)
The effect of oxygen pickup during selective laser melting on the microstructure and mechanical properties of Ti-6Al-4V lattices
M. Velasco-Castro et al.
HELIYON (2019)
Transient dynamics of powder spattering in laser powder bed fusion additive manufacturing process revealed by in-situ high-speed high-energy x-ray imaging
Qilin Guo et al.
ACTA MATERIALIA (2018)
Fluid and particle dynamics in laser powder bed fusion
P. Bidare et al.
ACTA MATERIALIA (2018)
Understanding the effect of oxygen on weld pool and keyhole in laser beam welding
Lugui He et al.
JOURNAL OF LASER APPLICATIONS (2018)
Oxide inclusions in laser additive manufactured stainless steel and their effects on impact toughness and stress corrosion cracking behavior
Xiaoyuan Lou et al.
JOURNAL OF NUCLEAR MATERIALS (2018)
Formation of CrxCyOz coatings under laser ablation of Cr23C6 ceramics
M. Vlasova et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Inclusion evolution in additive manufactured 316L stainless steel by laser metal deposition process
Du-Rim Eo et al.
MATERIALS & DESIGN (2018)
Effect of scanning strategy on texture formation in Ni-25 at.% Mo alloys fabricated by selective laser melting
Shi-Hai Sun et al.
MATERIALS & DESIGN (2018)
Oxides, porosity and fatigue performance of AlSi10Mg parts produced by selective laser melting
Ming Tang et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Progress Towards Metal Additive Manufacturing Standardization to Support Qualification and Certification
Mohsen Seifi et al.
JOM (2017)
Selective laser melting of AlSi10Mg: Effects of scan direction, part placement and inert gas flow velocity on tensile strength
Ahmad Bin Anwar et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
In situ absorptivity measurements of metallic powders during laser powder-bed fusion additive manufacturing
Johannes Trapp et al.
APPLIED MATERIALS TODAY (2017)
Modulating laser intensity profile ellipticity for microstructural control during metal additive manufacturing
Tien T. Roehling et al.
ACTA MATERIALIA (2017)
Review of Mechanical Properties of Ti-6Al-4V Made by Laser-Based Additive Manufacturing Using Powder Feedstock
Allison M. Beese et al.
JOM (2016)
Denudation of metal powder layers in laser powder bed fusion processes
Manyalibo J. Matthews et al.
ACTA MATERIALIA (2016)
Role of melt behavior in modifying oxidation distribution using an interface incorporated model in selective laser melting of aluminum-based material
Dongdong Gu et al.
JOURNAL OF APPLIED PHYSICS (2016)
Effect of plume on weld penetration during high-power fiber laser welding
Jianglin Zou et al.
JOURNAL OF LASER APPLICATIONS (2016)
Electron beam melted Ti-6Al-4V: Microstructure, texture and mechanical behavior of the as-built and heat-treated material
Charlotte de Formanoir et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Effect of environmental oxygen content on the oxide inclusion in laser solid formed AISI 420 stainless steel
Menghua Song et al.
MATERIALS & DESIGN (2016)
Effects of substrate crystallographic orientations on crystal growth and microstructure formation in laser powder deposition of nickel-based superalloy
Zhaoyang Liu et al.
ACTA MATERIALIA (2015)
Anisotropic tensile behavior of Ti-6Al-4V components fabricated with directed energy deposition additive manufacturing
Beth E. Carroll et al.
ACTA MATERIALIA (2015)
Molten pool behaviour and its physical mechanism during selective laser melting of TiC/AlSi10Mg nanocomposites: simulation and experiments
Pengpeng Yuan et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2015)
Effects of process time interval and heat treatment on the mechanical and microstructural properties of direct laser deposited 316L stainless steel
Aref Yadollahi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Measurements of laser-induced plasma temperature field in deep penetration laser welding
Genyu Chen et al.
OPTICS AND LASER TECHNOLOGY (2013)
Microstructures and Properties of 17-4 PH Stainless Steel Fabricated by Selective Laser Melting
Lawrence E. Murr et al.
Journal of Materials Research and Technology-JMR&T (2013)
Balling behavior of stainless steel and nickel powder during selective laser melting process
Ruidi Li et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)
Gas flow effects on selective laser melting (SLM) manufacturing performance
B. Ferrar et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2012)
Plume attenuation of laser radiation during high power fiber laser welding
P. Yu. Shcheglov et al.
LASER PHYSICS LETTERS (2011)
Application of Nomarski differential interference contrast microscopy to highlight the prior austenite grain boundaries revealed by thermal etching
D. San Martin et al.
MATERIALS CHARACTERIZATION (2010)
The Origin of Microstructural Diversity, Texture, and Mechanical Properties in Electron Beam Melted Ti-6Al-4V
S. S. Al-Bermani et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2010)
Share Paper
