4.6 Article

Automated Miniaturized Digital Microfluidic Antimicrobial Susceptibility Test Using a Chip-Integrated Optical Oxygen Sensor

Journal

ACS SENSORS
Volume 6, Issue 3, Pages 1147-1156

Publisher

AMER CHEMICAL SOC
DOI: 10.1021/acssensors.0c02399

Keywords

digital microfluidics; laboratory automation; miniaturization; optical oxygen sensor; antimicrobial susceptibility test

Funding

  1. Hong Kong Research Grants Council [26310119]
  2. University Grants Committee [R9375]

Ask authors/readers for more resources

A novel digital microfluidic platform with an optical oxygen sensor film was developed for real-time antimicrobial susceptibility testing, allowing for continuous monitoring of bacterial growth and accurate results comparable to the standard method. Automatic sample dispensation, dilution, and mixing were achieved on the chip within a short timeframe, demonstrating the potential for rapid and reliable analysis with minimal sample handling.
We present the first digital microfluidic (DMF) antimicrobial susceptibility test (AST) using an optical oxygen sensor film for in-situ and real-time continuous measurement of extracellular dissolved oxygen (DO). The device allows one to monitor bacterial growth across the entire cell culture area, and the fabricated device was utilized for a miniaturized and automated AST. The oxygen-sensitive probe platinum(II)-5,10,15,20-tetrakis-(2,3,4,5,6-pentafluorophenyl)-porphyrin was embedded in a Hyflon AD 60 polymer and spin-coated as a 100 nm thick layer onto an ITO glass serving as the DMF ground electrode. This DMF-integrated oxygen sensing film was found to cause no negative effects to the droplet manipulation or cell growth on the chip. The developed DMF platform was used to monitor the DO consumption during Escherichia coli (E. coli) growth caused by cellular respiration. A rapid and reliable twofold dilution procedure was developed and performed, and the AST with E. coli ATCC 25922 in the presence of ampicillin, chloramphenicol, and tetracycline at different concentrations from 0.5 to 8 mu g mL(-1) was investigated. All sample dispensation, dilution, and mixing were performed automatically on the chip within 10 min. The minimum inhibitory concentration values measured from the DMF chip were consistent with those from the standard broth microdilution method but requiring only minimal sample handling and working with much smaller sample volumes.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.6
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available