4.6 Article

Prediction of Peak Particle Velocity Caused by Blasting through the Combinations of Boosted-CHAID and SVM Models with Various Kernels

Related references

Note: Only part of the references are listed.
Article Computer Science, Interdisciplinary Applications

Improved Levenberg-Marquardt backpropagation neural network by particle swarm and whale optimization algorithms to predict the deflection of RC beams

Jue Zhao et al.

Summary: The study aimed to develop a novel computer-aided method for predicting the deflection of reinforced concrete beams under concentrated loads. The WOA-LMBPNN model was optimized to achieve higher accuracy in predicting DRCB, using 120 experiments as input parameters. Comparison between WOA-LMBPNN and PSO-LMBPNN models showed the effectiveness of WOA and the efficiency of the hybrid model in predicting DRCB.

ENGINEERING WITH COMPUTERS (2022)

Article Computer Science, Interdisciplinary Applications

A new hybrid grey wolf optimizer-feature weighted-multiple kernel-support vector regression technique to predict TBM performance

Haiqing Yang et al.

Summary: A new hybrid intelligence technique was introduced to predict the performance of the full-face tunnel boring machine (TBM). By measuring and considering the important parameters, a predictive model was established and evaluated. The results showed that the model had high accuracy in predicting the TBM performance.

ENGINEERING WITH COMPUTERS (2022)

Article Computer Science, Interdisciplinary Applications

Reduction of computational error by optimizing SVR kernel coefficients to simulate concrete compressive strength through the use of a human learning optimization algorithm

Jiandong Huang et al.

Summary: This research introduces a new model based on artificial intelligence for optimizing compressive strength in concrete samples. By using a human learning optimization algorithm and support vector regression models, the study successfully identified the polynomial model as the most accurate for predicting and optimizing concrete strength under different conditions.

ENGINEERING WITH COMPUTERS (2022)

Article Computer Science, Interdisciplinary Applications

A generalized artificial intelligence model for estimating the friction angle of clays in evaluating slope stability using a deep neural network and Harris Hawks optimization algorithm

Hong Zhang et al.

Summary: In this study, a new artificial intelligence model was proposed for predicting the friction angle of clays from different areas. Through various tests and comparisons, it was found that this model can accurately predict the friction angle of clays from different regions.

ENGINEERING WITH COMPUTERS (2022)

Article Computer Science, Interdisciplinary Applications

A new auto-tuning model for predicting the rock fragmentation: a cat swarm optimization algorithm

Jiandong Huang et al.

Summary: The main objective of this study is to provide an auto-tuning model called cat swarm optimization (CSO) for predicting rock fragmentation. The results of the study show that the CSO model outperforms the particle swarm optimization (PSO) algorithm in terms of its predictive ability in the D-80 formula.

ENGINEERING WITH COMPUTERS (2022)

Article Computer Science, Interdisciplinary Applications

Developing GEP tree-based, neuro-swarm, and whale optimization models for evaluation of bearing capacity of concrete-filled steel tube columns

Payam Sarir et al.

Summary: This paper investigates advanced methods for predicting the bearing capacity of concrete-filled steel tube columns, comparing the results of a GEP-based tree equation with a hybrid model of PSO-ANN. The study demonstrates that GEP provides higher performance compared to PSO-ANN. In the optimization phase, the implementation of the whale optimization algorithm significantly maximizes the bearing capacity of CFST columns.

ENGINEERING WITH COMPUTERS (2021)

Article Environmental Sciences

Development of a new methodology for estimating the amount of PPV in surface mines based on prediction and probabilistic models (GEP-MC)

Jian Zhou et al.

Summary: The study analyzed the environmental impacts of ground vibration and associated damage resulting from blasting, utilizing a combination of predictive and probabilistic models. By applying a new intelligent model GEP, a predictive model with mathematical relations was developed and the Monte Carlo simulation technique was used to manage potential risks more effectively.

INTERNATIONAL JOURNAL OF MINING RECLAMATION AND ENVIRONMENT (2021)

Article Computer Science, Interdisciplinary Applications

A novel artificial intelligence technique to predict compressive strength of recycled aggregate concrete using ICA-XGBoost model

Jin Duan et al.

Summary: Recycled aggregate concrete is being researched using artificial intelligence techniques to assess its compressive strength, with the ICA-XGBoost model proving to be the most effective among the developed models. This model can be utilized in construction engineering to ensure adequate mechanical performance and safe usage of recycled aggregate concrete for building purposes.

ENGINEERING WITH COMPUTERS (2021)

Article Computer Science, Artificial Intelligence

Estimation of axial load-carrying capacity of concrete-filled steel tubes using surrogate models

Hai-Bang Ly et al.

Summary: The main objective of this study was to estimate the load-carrying capacity of CFST under axial compression using hybrid AI algorithms, with ANFIS system and various optimization methods compared. The results indicated that the ANFIS system optimized by PSO was the most effective and robust model, and the minor axis length and thickness of the steel tube contributed the most to the axial compression load-carrying capacity of CFST.

NEURAL COMPUTING & APPLICATIONS (2021)

Article Computer Science, Artificial Intelligence

A comparative study of ANN and ANFIS models for the prediction of cement-based mortar materials compressive strength

Danial Jahed Armaghani et al.

Summary: This study investigates the use of artificial intelligence techniques to predict the compressive strength of cement-based mortars. Both ANN and ANFIS models were found to reliably approximate the strength of mortars, with ANFIS outperforming ANN but showing signs of overfitting during verification. The developed ANN model was introduced as the best predictive technique for solving the problem of mortar compressive strength.

NEURAL COMPUTING & APPLICATIONS (2021)

Article Engineering, Civil

An efficient optimal neural network based on gravitational search algorithm in predicting the deformation of geogrid-reinforced soil structures

Ehsan Momeni et al.

Summary: This study investigates the feasibility of two soft computing techniques in predicting the deformation of Geosynthetic reinforced soil (GRS) structures, showing that the Gravitational Search Algorithm (GSA)-based artificial neural network (ANN) model outperforms the Particle Swarm Optimization (PSO)-based ANN model. The findings suggest that the proposed models can be implemented in assessing the performance of geosynthetic reinforced soil structures.

TRANSPORTATION GEOTECHNICS (2021)

Article Computer Science, Artificial Intelligence

Estimation of ultimate bearing capacity of driven piles in c-φ soil using MLP-GWO and ANFIS-GWO models: a comparative study

Ali Dehghanbanadaki et al.

Summary: A new forecast method using gray wolf optimization to enhance the performance of adaptive neuro-fuzzy inference system and multilayer perceptron models has been proposed to improve the estimation accuracy of the ultimate bearing capacity of single driven piles. The MLP-GWO model with a topology of 7 x 10 x 10 x 1 showed better results in predicting the UBC, with a RMSE of 1.86 kN and R-2 of 0.991 for the test data. Sensitivity analysis confirmed that pile area and length were the most effective factors for estimating UBC.

SOFT COMPUTING (2021)

Article Chemistry, Multidisciplinary

The Effectiveness of Ensemble-Neural Network Techniques to Predict Peak Uplift Resistance of Buried Pipes in Reinforced Sand

Jie Zeng et al.

Summary: This study investigates using neural network models to predict the uplift resistance of buried pipes, achieving a high level of accuracy in peak uplift resistance prediction, which can significantly improve pipeline design.

APPLIED SCIENCES-BASEL (2021)

Article Construction & Building Technology

Anti-rutting performance of the damping asphalt mixtures (DAMs) made with a high content of asphalt rubber (AR)

Jiandong Huang et al.

Summary: The research evaluates the mechanical properties and rutting resistance of two DAMs designed based on OG aggregate structure. The results show that DAMs have high damping characteristics and exhibit better rutting resistance in HWT samples compared to traditional mixtures.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Construction & Building Technology

Evaluation of workability and mechanical properties of asphalt binder and mixture modified with waste toner

Jiandong Huang et al.

Summary: The addition of waste toner in asphalt mixtures can improve some properties while affecting others, such as stiffening the asphalt binder and reducing moisture susceptibility.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Construction & Building Technology

被撤回的出版物: Influence of crumb rubber particle sizes on rutting, low temperature cracking, fracture, and bond strength properties of asphalt binder (Retracted article. See vol. 55, 2022)

Jiandong Huang et al.

Summary: The study found that larger particle size of Crumb Rubber (CR) performed better in improving rutting, low temperature cracking, and fracture properties of asphalt binder. However, the addition of CR was found to have deteriorating impact on bond strength behavior of asphalt binder, with the lowest considered CR particle size showing the least impact.

MATERIALS AND STRUCTURES (2021)

Article Computer Science, Artificial Intelligence

Surrogate models for the compressive strength mapping of cement mortar materials

Panagiotis G. Asteris et al.

Summary: This study investigates the use of artificial intelligence algorithms to predict the compressive strength of mortars, showing that AI techniques are able to reliably approximate the strength of mortars.

SOFT COMPUTING (2021)

Article Construction & Building Technology

Modelling the energy performance of residential buildings using advanced computational frameworks based on RVM, GMDH, ANFIS-BBO and ANFIS-IPSO

Navid Kardani et al.

Summary: Modelling the heating load and cooling load is crucial for the designing of energy-efficient buildings. This study proposes novel approaches using advanced computational frameworks to predict the HL and CL of residential buildings, with RVM identified as the best predictive model.

JOURNAL OF BUILDING ENGINEERING (2021)

Article Immunology

Genetic justification of severe COVID-19 using a rigorous algorithm

Eleni Gavriilaki et al.

Summary: This study identified genetic susceptibility in severe COVID-19 patients, particularly in relation to ADAMTS13 and other complement-related variants, which were associated with ICU hospitalization. The findings suggest a specific patient population that may benefit from early initiation of targeted treatment.

CLINICAL IMMUNOLOGY (2021)

Article Computer Science, Information Systems

Analysis and Prediction of COVID-19 Using SIR, SEIQR, and Machine Learning Models: Australia, Italy, and UK Cases

Iman Rahimi et al.

Summary: This report analyzes the COVID-19 outbreak in Australia, Italy, and the UK, proposing mathematical models for epidemiological predictions and optimization algorithms to improve the forecasting capabilities of SIR and SEIQR models. The results show the effectiveness of the optimized models compared to machine learning algorithms like the Prophet algorithm and logistic function, with the Prophet algorithm showing better prediction performance for Italy and the UK cases.

INFORMATION (2021)

Article Geosciences, Multidisciplinary

Application of Tree-Based Predictive Models to Forecast Air Overpressure Induced by Mine Blasting

Bhatawdekar Ramesh Murlidhar et al.

Summary: The study aimed to develop tree-based data mining algorithms to accurately predict blast-induced air overpressure in granite quarries. The genetic programming (GP) model outperformed other models in terms of RMSE, R-2, and MAE, demonstrating its robustness and applicability.

NATURAL RESOURCES RESEARCH (2021)

Article Computer Science, Interdisciplinary Applications

A new design of evolutionary hybrid optimization of SVR model in predicting the blast-induced ground vibration

Wusi Chen et al.

Summary: This study examines the suitability of hybridizing different optimization algorithms with data-driven models to predict ground vibration, and compares the performance of various models through a case study, with the MFA-SVR model being the most accurate.

ENGINEERING WITH COMPUTERS (2021)

Article Geosciences, Multidisciplinary

Use of Intelligent Methods to Design Effective Pattern Parameters of Mine Blasting to Minimize Flyrock Distance

Jian Zhou et al.

NATURAL RESOURCES RESEARCH (2020)

Article Engineering, Geological

Effect of Water Content on Argillization of Mudstone During the Tunnelling process

Bolong Liu et al.

ROCK MECHANICS AND ROCK ENGINEERING (2020)

Article Geosciences, Multidisciplinary

A Fuzzy Rule-Based Approach to Address Uncertainty in Risk Assessment and Prediction of Blast-Induced Flyrock in a Quarry

Mahdi Hasanipanah et al.

NATURAL RESOURCES RESEARCH (2020)

Article Green & Sustainable Science & Technology

Examining Hybrid and Single SVM Models with Different Kernels to Predict Rock Brittleness

Danial Jahed Armaghani et al.

SUSTAINABILITY (2020)

Article Chemistry, Multidisciplinary

On the Use of Neuro-Swarm System to Forecast the Pile Settlement

Danial Jahed Armaghani et al.

APPLIED SCIENCES-BASEL (2020)

Article Geosciences, Multidisciplinary

A Novel Intelligent ELM-BBO Technique for Predicting Distance of Mine Blasting-Induced Flyrock

Bhatawdekar Ramesh Murlidhar et al.

NATURAL RESOURCES RESEARCH (2020)

Article Construction & Building Technology

Mapping and holistic design of natural hydraulic lime mortars

Maria Apostolopoulou et al.

CEMENT AND CONCRETE RESEARCH (2020)

Article Engineering, Geological

Prediction of ground vibration induced by blasting operations through the use of the Bayesian Network and random forest models

Jian Zhou et al.

SOIL DYNAMICS AND EARTHQUAKE ENGINEERING (2020)

Article Construction & Building Technology

Predicting the Permeability of Pervious Concrete Based on the Beetle Antennae Search Algorithm and Random Forest Model

Jiandong Huang et al.

ADVANCES IN CIVIL ENGINEERING (2020)

Article Engineering, Multidisciplinary

A Novel Heuristic Algorithm for the Modeling and Risk Assessment of the COVID-19 Pandemic Phenomenon

Panagiotis G. Asteris et al.

CMES-COMPUTER MODELING IN ENGINEERING & SCIENCES (2020)

Article Multidisciplinary Sciences

Prediction of Lateral Deflection of Small-Scale Piles Using Hybrid PSO-ANN Model

Mandy Khari et al.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2020)

Article Chemistry, Multidisciplinary

Invasive Weed Optimization Technique-Based ANN to the Prediction of Rock Tensile Strength

Lei Huang et al.

APPLIED SCIENCES-BASEL (2019)

Proceedings Paper Construction & Building Technology

Compressive strength of natural hydraulic lime mortars using soft computing techniques

Maria Apostolopoulou et al.

3RD INTERNATIONAL CONFERENCE ON STRUCTURAL INTEGRITY (ICSI 2019) (2019)

Article Computer Science, Artificial Intelligence

Feasibility of ICA in approximating ground vibration resulting from mine blasting

Danial Jahed Armaghani et al.

NEURAL COMPUTING & APPLICATIONS (2018)

Article Engineering, Geological

Investigation on the Cracking Character of Jointed Rock Mass Beneath TBM Disc Cutter

Haiqing Yang et al.

ROCK MECHANICS AND ROCK ENGINEERING (2018)

Article Construction & Building Technology

Effects of joints on the cutting behavior of disc cutter running on the jointed rock mass

H. Q. Yang et al.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2018)

Review Construction & Building Technology

Evaluation method of rockburst: State-of-the-art literature review

Jian Zhou et al.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2018)

Article Computer Science, Interdisciplinary Applications

Forecasting blast-induced ground vibration developing a CART model

Mahdi Hasanipanah et al.

ENGINEERING WITH COMPUTERS (2017)

Article Environmental Sciences

A new developed approach for the prediction of ground vibration using a hybrid PSO-optimized ANFIS-based model

Azam Shahnazar et al.

ENVIRONMENTAL EARTH SCIENCES (2017)

Article Environmental Sciences

Estimation of air-overpressure produced by blasting operation through a neuro-genetic technique

Edy Tonnizam Mohamad et al.

ENVIRONMENTAL EARTH SCIENCES (2016)

Article Environmental Sciences

Estimation of ground vibration produced by blasting operations through intelligent and empirical models

S. Ghoraba et al.

ENVIRONMENTAL EARTH SCIENCES (2016)

Article Environmental Sciences

Prediction of ground vibration due to quarry blasting based on gene expression programming: a new model for peak particle velocity prediction

R. Shirani Faradonbeh et al.

INTERNATIONAL JOURNAL OF ENVIRONMENTAL SCIENCE AND TECHNOLOGY (2016)

Article Geosciences, Multidisciplinary

Application of two intelligent systems in predicting environmental impacts of quarry blasting

Danial Jahed Armaghani et al.

ARABIAN JOURNAL OF GEOSCIENCES (2015)

Article Environmental Sciences

Feasibility of ANFIS model for prediction of ground vibrations resulting from quarry blasting

Danial Jahed Armaghani et al.

ENVIRONMENTAL EARTH SCIENCES (2015)

Article Environmental Sciences

Blast-induced air and ground vibration prediction: a particle swarm optimization-based artificial neural network approach

Mohsen Hajihassani et al.

ENVIRONMENTAL EARTH SCIENCES (2015)

Article Engineering, Multidisciplinary

Feasibility of indirect determination of blast induced ground vibration based on support vector machine

Mahdi Hasanipanah et al.

MEASUREMENT (2015)

Article Engineering, Environmental

Ground vibration prediction in quarry blasting through an artificial neural network optimized by imperialist competitive algorithm

Mohsen Hajihassani et al.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2015)

Article Metallurgy & Metallurgical Engineering

Peak particle velocity prediction using support vector machines: a surface blasting case study

S. R. Dindarloo

JOURNAL OF THE SOUTHERN AFRICAN INSTITUTE OF MINING AND METALLURGY (2015)

Article Geosciences, Multidisciplinary

Blasting-induced flyrock and ground vibration prediction through an expert artificial neural network based on particle swarm optimization

D. Jahed Armaghani et al.

ARABIAN JOURNAL OF GEOSCIENCES (2014)

Article Engineering, Civil

Flood susceptibility mapping using a novel ensemble weights-of-evidence and support vector machine models in GIS

Mahyat Shafapour Tehrany et al.

JOURNAL OF HYDROLOGY (2014)

Article Engineering, Geological

An ANN-based approach to predict blast-induced ground vibration of Gol-E-Gohar iron ore mine, Iran

Mahdi Saadat et al.

JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING (2014)

Article Acoustics

Development of a fuzzy model for predicting ground vibration caused by rock blasting in surface mining

Ebrahim Ghasemi et al.

JOURNAL OF VIBRATION AND CONTROL (2013)

Article Computer Science, Artificial Intelligence

Evaluation and prediction of blast-induced ground vibration at Shur River Dam, Iran, by artificial neural network

Masoud Monjezi et al.

NEURAL COMPUTING & APPLICATIONS (2013)

Article Engineering, Geological

Prediction of Backbreak in Open-Pit Blasting Operations Using the Machine Learning Method

Manoj Khandelwal et al.

ROCK MECHANICS AND ROCK ENGINEERING (2013)

Article Mining & Mineral Processing

Prediction of flyrock in open pit blasting operation using machine learning method

Manoj Khandelwal et al.

INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2013)

Article Engineering, Multidisciplinary

Landslide Susceptibility Assessment in Vietnam Using Support Vector Machines, Decision Tree, and Naive Bayes Models

Dieu Tien Bui et al.

MATHEMATICAL PROBLEMS IN ENGINEERING (2012)

Article Construction & Building Technology

Comparison of intelligence science techniques and empirical methods for prediction of blasting vibrations

M. Mohamadnejad et al.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2012)

Article Engineering, Geological

Landslide susceptibility assessment using SVM machine learning algorithm

Milos Marjanovic et al.

ENGINEERING GEOLOGY (2011)

Article Computer Science, Interdisciplinary Applications

Application of soft computing to predict blast-induced ground vibration

Manoj Khandelwal et al.

ENGINEERING WITH COMPUTERS (2011)

Article Environmental Sciences

Prediction of environmental impacts of quarry blasting operation using fuzzy logic

Abdullah Fisne et al.

ENVIRONMENTAL MONITORING AND ASSESSMENT (2011)

Article Engineering, Geological

Performance of fuzzy logic and artificial neural network in prediction of ground and air vibrations

Mostafa Tantawy Mohamed

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2011)

Article Construction & Building Technology

Prediction of blast-induced ground vibration using artificial neural networks

M. Monjezi et al.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2011)

Article Engineering, Geological

Prediction of blast-induced ground vibration using artificial neural network

Manoj Khandelwal et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2009)

Article Engineering, Geological

Evaluation of blast-induced ground vibration predictors

Manoj Khandelwal et al.

SOIL DYNAMICS AND EARTHQUAKE ENGINEERING (2007)

Article Engineering, Geological

An intelligent approach to prediction and control ground vibration in mines

T. Singh et al.

GEOTECHNICAL AND GEOLOGICAL ENGINEERING (2005)