Related references
Note: Only part of the references are listed.Micro and macro-structural effects of high temperatures in Prada limestone: Key factors for future fire-intervention protocols in Tres Ponts Tunnel (Spain)
Victor Martinez-Ibanez et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Temperature-Induced Explosive Behaviour and Thermo-Chemical Damage on Pyrite-Bearing Limestones: Causes and Mechanisms
V Martinez-Ibanez et al.
ROCK MECHANICS AND ROCK ENGINEERING (2021)
Physical and micro-structural characteristics of limestone after high temperature exposure
Qing-Bin Meng et al.
BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2020)
Assessment Techniques for Studying the Effects of Fire on Stone Materials: A Literature Review
Edite Martinho et al.
INTERNATIONAL JOURNAL OF ARCHITECTURAL HERITAGE (2020)
A combined thermo-mechanical drilling technology for deep geothermal and hard rock reservoirs
Edoardo Rossi et al.
GEOTHERMICS (2020)
Effects of mineral content on limestone properties with exposure to different temperatures
Weiqiang Zhang et al.
JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2020)
The influence of thermal treatment on rock-bit interaction: a study of a combined thermo-mechanical drilling (CTMD) concept
Edoardo Rossi et al.
GEOTHERMAL ENERGY (2020)
Field test of a Combined Thermo -Mechanical Drilling technology. Mode I: Thermal spallation drilling
Edoardo Rossi et al.
JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2020)
Field test of a Combined Thermo-Mechanical Drilling technology. Mode II: Flame-assisted rotary drilling
Edoardo Rossi et al.
JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2020)
Mechanical property and thermal damage factor of limestone at high temperature
Jian Yang et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2019)
Application of high powered Laser Technology to alter hard rock properties towards lower strength materials for more efficient drilling, mining, and Geothermal Energy production
Shahin Jamali et al.
GEOMECHANICS FOR ENERGY AND THE ENVIRONMENT (2019)
Determination of Drilling Rate Index Based on Rock Strength Using Regression Analysis
Hayati Yenice
ANAIS DA ACADEMIA BRASILEIRA DE CIENCIAS (2019)
On the technical properties of the Carovigno stone from Apulia (Italy): physical characterization and decay effects by means of experimental ageing tests
Giovanna Fioretti et al.
ENVIRONMENTAL EARTH SCIENCES (2018)
The Effects of High Heating Rate and High Temperature on the Rock Strength: Feasibility Study of a Thermally Assisted Drilling Method
Edoardo Rossi et al.
ROCK MECHANICS AND ROCK ENGINEERING (2018)
The effect of thermal cycles on limestone mechanical degradation
C. J. Villarraga et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2018)
Relationships between the drilling rate index and physicomechanical rock properties
Mehmet Capik et al.
BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2017)
Thermal Volume Changes and Creep in the Callovo-Oxfordian Claystone
Malik Belmokhtar et al.
ROCK MECHANICS AND ROCK ENGINEERING (2017)
Experimental study on mechanical and porous characteristics of limestone affected by high temperature
Weiqiang Zhang et al.
APPLIED THERMAL ENGINEERING (2017)
Non-destructive diagnosis by colorimetry of building stone subjected to high temperatures
Kevin Beck et al.
EUROPEAN JOURNAL OF ENVIRONMENTAL AND CIVIL ENGINEERING (2016)
Examining the relation between rock mass cuttability index and rock drilling properties
Mustafa E. Yetkin et al.
JOURNAL OF AFRICAN EARTH SCIENCES (2016)
A new approach to rock brittleness and its usability at prediction of drillability
M. Kemal Ozfirat et al.
JOURNAL OF AFRICAN EARTH SCIENCES (2016)
Drilling rate prediction of an open pit mine using the rock mass drillability index
Mohammad Ataei et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2015)
Influence of thermal damage on the physical and mechanical properties of carbonate rocks
N. Sengun
ARABIAN JOURNAL OF GEOSCIENCES (2014)
Thermal decay of carbonate dimension stones: fabric, physical and mechanical changes
Gioacchino Francesco Andriani et al.
ENVIRONMENTAL EARTH SCIENCES (2014)
Evolution of the crack network in glass samples submitted to brittle creep conditions
Celine Mallet et al.
INTERNATIONAL JOURNAL OF FRACTURE (2014)
A stochastic penetration rate model for rotary drilling in surface mines
Omid Saeidi et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2014)
Investigation of some property changes of natural building stones exposed to fire and high heat
A. Ozguven et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
Real-time Estimation of Elastic Properties of Formation Rocks Based on Drilling Data by Using an Artificial Neural Network
E. Jamshidi et al.
ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2013)
Temperature influence on the physical and mechanical properties of a porous rock: San Julian's calcarenite
V. Brotons et al.
ENGINEERING GEOLOGY (2013)
Study on dynamic characteristics of marble under impact loading and high temperature
Shi Liu et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2013)
Artificial weathering of stone by heating
Elisa Franzoni et al.
JOURNAL OF CULTURAL HERITAGE (2013)
Assessment of relationships between drilling rate index and mechanical properties of rocks
Olgay Yarali et al.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2013)
Classifications of properties influencing the drillability of rocks, based on the NTNU/SINTEF test method
Filip Dahl et al.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2012)
An experimental investigation into the drilling and physico-mechanical properties of a rock-like brittle material
E. Yasar et al.
JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2011)
The drillability assessment of rocks using the different brittleness values
Olgay Yarali et al.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2011)
Thermal effect on the physical properties of carbonate rocks
H. Yavuz et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2010)
Assessment of some brittleness indexes in rock-drilling efficiency
Rasit Altindag
ROCK MECHANICS AND ROCK ENGINEERING (2010)
A new classification system for evaluating rock penetrability
S. H. Hoseinie et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2009)
Index properties and strength variation controlled by microstructure for sedimentary rocks
N. Sabatakakis et al.
ENGINEERING GEOLOGY (2008)
Coupled evolutions of fracture toughness and elastic wave velocities at high crack density in thermally treated Westerly granite
M. H. B. Nasseri et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2007)
Microscopic and macroscopic characterization of the porosity of marble as a function of temperature and impregnation
K. Malaga-Starzec et al.
CONSTRUCTION AND BUILDING MATERIALS (2006)
Effects of heating on the hydraulic and poroelastic properties of bourgogne limestone
M. Lion et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2005)
Dominant rock properties affecting the penetration rate of percussive drills
S Kahraman et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2003)
Share Paper
