Related references
Note: Only part of the references are listed.Comprehensive review on alloy design, processing, and performance of β Titanium alloys as biomedical materials
Sumit Bahl et al.
INTERNATIONAL MATERIALS REVIEWS (2021)
Synergetic effects of surface texturing and solid lubricants to tailor friction and wear - A review
Andreas Rosenkranz et al.
TRIBOLOGY INTERNATIONAL (2021)
Mechanical properties and frictional resistance of Al composites reinforced with Ti3C2Tx MXene
Jie Hu et al.
CHINESE CHEMICAL LETTERS (2020)
Surface modification of CrFeCoNiMo high entropy alloy induced by high-current pulsed electron beam
Peng Lyu et al.
APPLIED SURFACE SCIENCE (2020)
Tribological behaviors of vacuum hot-pressed ceramic composites with enhanced cyclic oxidation and corrosion resistance
Xuewu Li et al.
CERAMICS INTERNATIONAL (2020)
Metal Oxide Nanosheets as 2D Building Blocks for the Design of Novel Materials
Melvin A. Timmerman et al.
CHEMISTRY-A EUROPEAN JOURNAL (2020)
Laser interference patterned ta-C-coated dry forming tools
Theresa Jaehnig et al.
INDUSTRIAL LUBRICATION AND TRIBOLOGY (2020)
Microstructures and mechanical properties of wear-resistant titanium oxide coatings deposited on Ti-6Al-4V alloy using laser cladding
Yitian Zhao et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)
Tailoring self-lubricating, wear-resistance, anticorrosion and antifouling properties of Ti/(Cu, MoS2)-DLC coating in marine environment by controlling the content of Cu dopant
Jingwen Zhang et al.
TRIBOLOGY INTERNATIONAL (2020)
High temperature tribological behaviors and wear mechanisms of NiAl-NbC-Ag composites formed by in-situ decomposition of AgNbO3
Xiaochun Feng et al.
TRIBOLOGY INTERNATIONAL (2020)
Technical Characteristics and Wear-Resistant Mechanism of Nano Coatings: A Review
Yunqing Gu et al.
COATINGS (2020)
Effects of surface composite structure with micro-grooves and Sn-Ag-Cu on reducing friction and wear of Ni3Al alloys
Guanchen Lu et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Nanotribology of 2D materials and their macroscopic applications
Ji Hye Lee et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2020)
Towards molecular simulations that are transparent, reproducible, usable by others, and extensible (TRUE)
Matthew W. Thompson et al.
MOLECULAR PHYSICS (2020)
Superlubricitive engineering-Future industry nearly getting rid of wear and frictional energy consumption
Jianbin Luo et al.
FRICTION (2020)
Mechanotribological Aspects of MXene-Reinforced Nanocomposites
Massoud Malaki et al.
ADVANCED MATERIALS (2020)
2D nano-materials beyond graphene: from synthesis to tribological studies
Andreas Rosenkranz et al.
APPLIED NANOSCIENCE (2020)
Mechanical and tribological properties of nanocomposites incorporated with two-dimensional materials
Zhengjia Ji et al.
FRICTION (2020)
Low friction in bcc metals via grain boundary sliding
Adam R. Hinkle et al.
PHYSICAL REVIEW MATERIALS (2020)
Experiment of frictional vibration performance of the micro-texture of DLC thin film with dry gas seal rings
Xuexing Ding et al.
TRIBOLOGY INTERNATIONAL (2020)
Evolution of regimes of wear in zircaloy-4/inconel-600 contact subjected to fretting loading
Krishnamurti Singh et al.
TRIBOLOGY INTERNATIONAL (2020)
Wear and friction performance evaluation of nickel based nanocomposite coatings under refrigerant lubrication
Muhammad Usman Bhutta et al.
TRIBOLOGY INTERNATIONAL (2020)
In-situ fabrication of gradient titanium oxide ceramic coating on laser surface textured Ti6Al4V alloy with improved mechanical property and wear performance
Shuo Yuan et al.
VACUUM (2020)
Evidence of Inverse Hall-Petch Behavior and Low Friction and Wear in High Entropy Alloys
Morgan R. Jones et al.
SCIENTIFIC REPORTS (2020)
Phase constitution, microstructure and properties of pulsed laser-clad ternary CrNiTi medium-entropy alloy coating on pure titanium
Linjiang Chai et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Tribology of 2D Nanomaterials: A Review
Paul C. Uzoma et al.
COATINGS (2020)
Resistance of PVD Coatings to Erosive and Wear Processes: A Review
Alicja Krella
COATINGS (2020)
Effective usage of 2D MXene nanosheets as solid lubricant - Influence of contact pressure and relative humidity
Max Marian et al.
APPLIED SURFACE SCIENCE (2020)
Modelling adhesive wear extension in fretting interfaces: An advection-dispersion-reaction contact oxygenation approach
Soha Baydoun et al.
TRIBOLOGY INTERNATIONAL (2020)
Wear and corrosion behavior of P20 steel surface modified by gas nitriding with laser surface engineering
Guanghua Yan et al.
APPLIED SURFACE SCIENCE (2020)
A study on the tribological property of MoS2/Ti-MoS2/Si multilayer nanocomposite coating deposited by magnetron sputtering
Ning Kong et al.
RSC ADVANCES (2020)
Recent progress on graphene-analogous 2D nanomaterials: Properties, modeling and applications
Bo Liu et al.
PROGRESS IN MATERIALS SCIENCE (2019)
A review on enhancement of mechanical and tribological properties of polymer composites reinforced by carbon nanotubes and graphene sheet: Molecular dynamics simulations
Yunlong Li et al.
COMPOSITES PART B-ENGINEERING (2019)
Friction performance of DLC film textured surface of high pressure dry gas sealing ring
Delin Chen et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2019)
Review of Aluminum-To-Steel Welding Technologies for Car-Body Applications
Alessio Gullino et al.
METALS (2019)
Recent advances in friction and lubrication of graphene and other 2D materials: Mechanisms and applications
Lincong Liu et al.
FRICTION (2019)
Nanomaterials in Superlubricity
Wenzheng Zhai et al.
ADVANCED FUNCTIONAL MATERIALS (2019)
Durability and Wear Resistance of Laser-Textured Hardened Stainless Steel Surfaces with Hydrophobic Properties
A. Garcia-Giron et al.
LANGMUIR (2019)
Self-competing and Coupled Effect of Laser-Engraved Counterface Groove Depth and Density on Wear of Alumina PTFE
Jiaxin Ye et al.
TRIBOLOGY LETTERS (2019)
Gradient architecture of Si containing layer and improved cutting performance of AlCrSiN coated tools
Fei Cai et al.
WEAR (2019)
Room and elevated temperature sliding wear behavior and mechanisms of additively manufactured novel precipitation strengthened metallic composites
T. B. Torgerson et al.
WEAR (2019)
Investigation of the influence of rail hardness on the wear of rail and wheel materials under dry conditions (ICRI wear mapping project)
R. Lewis et al.
WEAR (2019)
Surface Texturing in Machine Elements - A Critical Discussion for Rolling and Sliding Contacts
Andreas Rosenkranz et al.
ADVANCED ENGINEERING MATERIALS (2019)
Grain size effect on wear resistance of WC-Co cemented carbides under different tribological conditions
Haibin Wang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
Fabrication of multifunctional titanium surfaces by producing hierarchical surface patterns using laser based ablation methods
Christoph Zwahr et al.
SCIENTIFIC REPORTS (2019)
Impacts of the substrate stiffness on the anti-wear performance of graphene
Quanzhou Yao et al.
AIP ADVANCES (2019)
Status of laser transformation hardening of steel and its alloys: a review
Purushothaman Dinesh Babu et al.
EMERGING MATERIALS RESEARCH (2019)
Microwave heating and its applications in surface engineering: a review
Hitesh Vasudev et al.
MATERIALS RESEARCH EXPRESS (2019)
Ultra-Wear-Resistant MXene-Based Composite Coating via in Situ Formed Nanostructured Tribofilm
Xuan Yin et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Friction and wear behavior of PTFE coatings modified with poly (methyl methacrylate)
Shiguang Peng et al.
COMPOSITES PART B-ENGINEERING (2019)
Robust sandwich micro-structure coating layer for wear-resistant conductive polyester fabrics
Hongtao Zhao et al.
APPLIED SURFACE SCIENCE (2019)
Gas-atomized copper-based particles encapsulated in graphene oxide for high wear-resistant composites
Wenzheng Zhai et al.
COMPOSITES PART B-ENGINEERING (2019)
Effect of grain size on wear resistance of nanocrystalline NiTi shape memory alloy
Pan Liu et al.
MATERIALS LETTERS (2019)
Tribology of two-dimensional materials: From mechanisms to modulating strategies
Shuai Zhang et al.
MATERIALS TODAY (2019)
Effect of Ni content on the microstructure and mechanical behaviour of CrAlNiN coatings deposited by closed field unbalanced magnetron sputtering
Chuhan Sha et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Nanodiamond as an effective additive in oil to dramatically reduce friction and wear for fretting steel/copper interfaces
Wenzheng Zhai et al.
TRIBOLOGY INTERNATIONAL (2019)
Additive manufacturing of ultrafine-grained high-strength titanium alloys
Duyao Zhang et al.
NATURE (2019)
The sliding wear behaviour of steels with the same hardness
O. A. Zambrano et al.
WEAR (2019)
Subtractive manufacturing of stable hierarchical micro-nano structures on AA5052 sheet with enhanced water repellence and durable corrosion resistance
Xuewu Li et al.
MATERIALS & DESIGN (2019)
Core-shell nanospheres to achieve ultralow friction polymer nanocomposites with superior mechanical properties
Lin Zhang et al.
NANOSCALE (2019)
Application of graphene derivatives and their nanocomposites in tribology and lubrication: a review
Jianlin Sun et al.
RSC ADVANCES (2019)
Multi-Scale Surface Texturing in Tribology-Current Knowledge and Future Perspectives
Philipp G. Gruetzmacher et al.
LUBRICANTS (2019)
Solid Lubrication with MoS2: A Review
Mohammad R. Vazirisereshk et al.
LUBRICANTS (2019)
A review: advancements in fluoro-based polymers for aggrandizing anti-galling and wear resistant characteristics
Kalpesh K. Kakulite et al.
SN APPLIED SCIENCES (2019)
Technology for the Deposition of Wear-Resistant Coatings on the Airfoil Shroud Platforms of GTE Turbine Blades
N. Abraimov et al.
RUSSIAN METALLURGY (2019)
Direct Laser Interference Patterning of Bioceramics: A Short Review
Douglas Fabris et al.
CERAMICS-SWITZERLAND (2019)
A review on metallic porous materials: pore formation, mechanical properties, and their applications
Biao Zhao et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Tribological behaviour of self-lubricating materials at high temperatures
Hector Torres et al.
INTERNATIONAL MATERIALS REVIEWS (2018)
Additively manufactured hierarchical stainless steels with high strength and ductility
Y. Morris Wang et al.
NATURE MATERIALS (2018)
Review of Nickel-Based Electrodeposited Tribo-Coatings
Zeynab Mahidashti et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2018)
Ultrafine Ceramic Grains Embedded in Metallic Glass Matrix: Achieving Superior Wear Resistance via Increase in Both Hardness and Toughness
Lina Yang et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Wear-triggered self-healing behavior on the surface of nanocrystalline nickel aluminum bronze/Ti3SiC2 composites
Wenzheng Zhai et al.
APPLIED SURFACE SCIENCE (2018)
Characterization and experimental analysis of boron carbide and rice husk ash reinforced AA7075 aluminium alloy hybrid composite
Nishant Verma et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Influence of annealing on the tribological properties of Zr-based bulk metallic glass
Jun Zhao et al.
JOURNAL OF NON-CRYSTALLINE SOLIDS (2018)
Review Article: Stress in thin films and coatings: Current status, challenges, and prospects
Gregory Abadias et al.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A (2018)
Hydrothermal synthesis of Ag-ZrO2/r-GO coating on CoCrMo substrate
L. J. Zhao et al.
MATERIALS LETTERS (2018)
Laser surface alloying on aluminum and its alloys: A review
Yiming Chi et al.
OPTICS AND LASERS IN ENGINEERING (2018)
Asperity-Level Origins of Transition from Mild to Severe Wear
Ramin Aghababaei et al.
PHYSICAL REVIEW LETTERS (2018)
Recent advances in the development of aerospace materials
Xuesong Zhang et al.
PROGRESS IN AEROSPACE SCIENCES (2018)
Effects of single- and dual-element ion implantation on tribomechanical properties of Cronidur 30 bearing steel
Jie Jin et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Influence of frequency and C2H2 flow on growth properties of diamond-like carbon coatings with AlCrSi co-doping deposited using a reactive high power impulse magnetron sputtering
Wei Dai et al.
THIN SOLID FILMS (2018)
A comparative study on torsional fretting and torsional sliding wear of CuNiAl under different lubricated conditions
Po Zhang et al.
TRIBOLOGY INTERNATIONAL (2018)
Torsional fretting and torsional sliding wear behaviors of CuNiAl against 42CrMo4 under dry condition
Po Zhang et al.
TRIBOLOGY INTERNATIONAL (2018)
Fretting wear behavior of CuNiAl against 42CrMo4 under different lubrication conditions
Po Zhang et al.
TRIBOLOGY INTERNATIONAL (2018)
The influence of chemical and phase composition on mechanical, tribological and electrical properties of Silver-Aluminum alloys
Mamoun Taher et al.
TRIBOLOGY INTERNATIONAL (2018)
From lab to application - Improved frictional performance of journal bearings induced by single- and multi-scale surface patterns
Philipp G. Gruetzmacher et al.
TRIBOLOGY INTERNATIONAL (2018)
Tribological behaviour of laser textured Ti6Al4V alloy coated with MoS2 and graphene
M. A. Arenas et al.
TRIBOLOGY INTERNATIONAL (2018)
Self-Lubricating PTFE-Based Composites with Black Phosphorus Nanosheets
Yan Lv et al.
TRIBOLOGY LETTERS (2018)
Optimization of mechanical and tribological properties of FCC CrCoNi multi-principal element alloy with Mo addition
Junwei Miao et al.
VACUUM (2018)
Interface defects and stress relief of super hard Ti+C/a-CNx gradient multilayer films
D. G. Liu et al.
VACUUM (2018)
Erosive wear resistance evaluation with the hardness after strain-hardening and its application for a high-entropy alloy
Xiulin Ji et al.
WEAR (2018)
Effects of grain size gradients on the fretting wear of a specially-processed low carbon steel against AISI E52100 bearing steel
Prabhat K. Rai et al.
WEAR (2018)
Mechanical behaviors of T-carbon: A molecular dynamics study
Lichun Bai et al.
CARBON (2018)
Bio-inspired textures for functional applications
Ajay P. Malshe et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2018)
Recent advances in understanding the fatigue and wear behavior of dental composites and ceramics
Jamie J. Kruzic et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2018)
Tribological behavior and self-healing functionality of M50 material covered with surface micropores filled with Sn-Ag-Cu
Xiyao Liu et al.
TRIBOLOGY INTERNATIONAL (2018)
Friction reduction through biologically inspired scale-like laser surface textures
Johannes Schneider et al.
BEILSTEIN JOURNAL OF NANOTECHNOLOGY (2018)
Research Progress in Application of 2D Materials in Liquid-Phase Lubrication System
Lincong Liu et al.
MATERIALS (2018)
Superior wear resistance of diamond and DLC coatings
Ali Erdemir et al.
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2018)
Optimizing Bulk Metallic Glasses for Robust, Highly Wear-Resistant Gears
Douglas C. Hofmann et al.
ADVANCED ENGINEERING MATERIALS (2017)
Numerical and experimental evaluation of a conformally cooled H13 steel injection mould manufactured with selective laser melting
Maciej Mazur et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Nanoindentation study of mechanical properties of Ti based alloys with Fe and Ta additions
Shima Ehtemam-Haghighi et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Prospects of laser welding technology in the automotive industry: A review
Kyung-Min Hong et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Nanoindentation and wear properties of Ti and Ti-TiB composite materials produced by selective laser melting
H. Attar et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Nano-friction behavior of phosphorene
Lichun Bai et al.
NANOTECHNOLOGY (2017)
3D printing of high-strength aluminium alloys
John H. Martin et al.
NATURE (2017)
Exploiting carbon-based (Cr,Ce)/a-C:H nanocomposite film on cemented WC
Shengguo Zhou et al.
SURFACE AND INTERFACE ANALYSIS (2017)
Influence of surface topography on torsional fretting wear under flat-on-flat contact
Wenlong Lu et al.
TRIBOLOGY INTERNATIONAL (2017)
Tuning friction with composite hierarchical surfaces
Gianluca Costagliola et al.
TRIBOLOGY INTERNATIONAL (2017)
Clarification of high wear resistance mechanism of ta-CNx coating under poly alpha-olefin (PAO) lubrication
Xiaoxu Liu et al.
TRIBOLOGY INTERNATIONAL (2017)
Low Wear Steel Counterface Texture Design: A Case Study Using Micro-pits Texture and Alumina-PTFE Nanocomposite
Jiaxin Ye et al.
TRIBOLOGY LETTERS (2017)
Effect of oil temperature and counterpart material on the wear mechanism of ta-CNx coating under base oil lubrication
Xiaoxu Liu et al.
WEAR (2017)
Wear and friction between smooth or rough diamond-like carbon films and diamond tips
Lichun Bai et al.
WEAR (2017)
Effects of Doping Elements on the Friction and Wear of SUJ2 Steel Sliding against Aluminum Alloys
Yuh-Ping Chang et al.
MICROMACHINES (2017)
Graphene oxide-based evaporator with one-dimensional water transport enabling high-efficiency solar desalination
Yiju Li et al.
NANO ENERGY (2017)
2D nanomaterials as lubricant additive: A review
Huaping Xiao et al.
MATERIALS & DESIGN (2017)
Progress in Wear Resistant Materials for Total Hip Arthroplasty
Rohit Khanna et al.
COATINGS (2017)
Influence of tribology on global energy consumption, costs and emissions
Kenneth Holmberg et al.
FRICTION (2017)
Influence of titanium-coated (B4Cp + SiCp) particles on sulphide stress corrosion and wear behaviour of AA7050 hybrid composites (for MLG link)
R. Ranjith et al.
JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY (2017)
MXene-reinforced alumina ceramic composites
Mingming Fei et al.
CERAMICS INTERNATIONAL (2017)
Enhancement of tribological properties of polymer composites reinforced by functionalized graphene
Yunlong Li et al.
COMPOSITES PART B-ENGINEERING (2017)
ADM guidance-Ceramics: all-ceramic multilayer interfaces in dentistry
Ulrich Lohbauer et al.
DENTAL MATERIALS (2017)
Accelerated precipitation and growth of phases in an Al-Zn-Mg-Cu alloy processed by surface abrasion
Shan-Shan Wang et al.
ACTA MATERIALIA (2017)
Thermal stability and mechanical properties of HVOF/PVD duplex ceramic coatings produced by HVOF and cathodic vacuum arc
Wanglin Chen et al.
CERAMICS INTERNATIONAL (2017)
Progress in Tribological Properties of Nano-Composite Hard Coatings under Water Lubrication
Qianzhi Wang et al.
LUBRICANTS (2017)
2D or not 2D? The impact of nanoscale roughness and substrate interactions on the tribological properties of graphene and MoS2
Meagan B. Elinski et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2017)
Improved Wear Behavior of Cylindrical Roller Thrust Bearings by Three-Beam Laser Interference
Andreas Rosenkranz et al.
ADVANCED ENGINEERING MATERIALS (2016)
Reversible Nanopatterning on Polypyrrole Films by Atomic Force Microscope Electrochemical Lithography
He Liu et al.
ADVANCED FUNCTIONAL MATERIALS (2016)
Controlling Stiction in Nano-Electro-Mechanical Systems Using Liquid Crystals
Oleksandr Buchnev et al.
ACS NANO (2016)
Biomimetic multifunctional surfaces inspired from animals
Zhiwu Han et al.
ADVANCES IN COLLOID AND INTERFACE SCIENCE (2016)
Influence of boron content on the microstructure and tribological properties of Cr-B-N coatings in water lubrication
Qing Ma et al.
APPLIED SURFACE SCIENCE (2016)
Microstructure and tribological properties of MoS2+Zr composite coatings in high humidity environment
Man Ye et al.
APPLIED SURFACE SCIENCE (2016)
Thermoelectric properties of Al-doped Mg2Si thin films deposited by magnetron sputtering
Zhi-jian Chen et al.
APPLIED SURFACE SCIENCE (2016)
Analysis of economic impact from erosive wear by hard particles in a run-of-the-river hydroelectric plant
L. A. Teran et al.
ENERGY (2016)
Failure analysis of a run-of-the-river hydroelectric power plant
L. A. Teran et al.
ENGINEERING FAILURE ANALYSIS (2016)
Laser surface texturing and its contribution to friction and wear reduction: a brief review
Ahmad Firdaus et al.
INDUSTRIAL LUBRICATION AND TRIBOLOGY (2016)
Enhancing the hardness/compression/damping response of magnesium by reinforcing with biocompatible silica nanoparticulates
Gururaj Parande et al.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH (2016)
Tactile perception of skin and skin cream by friction induced vibrations
Shuyang Ding et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2016)
Corrosion resistance and mechanical properties of titanium with hierarchical micro-nanostructure
Baoe Li et al.
MATERIALS LETTERS (2016)
Polymers with autonomous life-cycle control
Jason F. Patrick et al.
NATURE (2016)
Nanotribological and wetting performance of hierarchical patterns
H. S. Grewal et al.
SOFT MATTER (2016)
Advanced characterization methods for wear resistant hard coatings: A review on recent progress
Michael Tkadletz et al.
SURFACE & COATINGS TECHNOLOGY (2016)
Identification of constitutive model parameters for nickel aluminum bronze in machining
Zhong-tao Fu et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2016)
Friction and wear properties of CrSiCN coatings with low carbon content as sliding against SiC and steel balls in water
Zhiwei Wu et al.
TRIBOLOGY INTERNATIONAL (2016)
Thermal oxidation behavior and tribological properties of textured TC4 surface: Influence of thermal oxidation temperature and time
Qichun Sun et al.
TRIBOLOGY INTERNATIONAL (2016)
Tribological behavior of zirconia-reinforced glass-ceramic composites in artificial saliva
R. L. P. Santos et al.
TRIBOLOGY INTERNATIONAL (2016)
Hydrodynamic lubrication of textured surfaces: A review of modeling techniques and key findings
Daniel Gropper et al.
TRIBOLOGY INTERNATIONAL (2016)
Effect of environmental hydrogen atoms on the tribological behaviors of diamond-like carbon films
Lichun Bai et al.
TRIBOLOGY INTERNATIONAL (2016)
Sliding wear of selective laser melting processed Ti6Al4V under boundary lubrication conditions
Y. Zhu et al.
WEAR (2016)
Novel structured anodic oxide films containing surface layers and porous sublayers showing excellent wear resistance performance
Yinghao Wu et al.
RSC ADVANCES (2016)
Fabrication of micro- and nano-scale hierarchical structures on Al surface with enhanced wettability, anti-corrosion and wear resistance
Xuewu Li et al.
MATERIALS EXPRESS (2016)
Preparation, mechanical and anti-friction performance of MXene/polymer composites
Heng Zhang et al.
MATERIALS & DESIGN (2016)
Influence of Third Particle on the Tribological Behaviors of Diamond-like Carbon Films
Lichun Bai et al.
SCIENTIFIC REPORTS (2016)
Corrosion and wear properties of Ni-Sn-P ternary deposits on mild steel via electroless method
A. P. I. Popoola et al.
ALEXANDRIA ENGINEERING JOURNAL (2016)
Mechanics of microwear traces in tooth enamel
Oscar Borrero-Lopez et al.
ACTA BIOMATERIALIA (2015)
In situ nitrided titanium alloys: Microstructural evolution during solidification and wear
H. Mohseni et al.
ACTA MATERIALIA (2015)
Influence of trimethylsilane flow on the microstructure, mechanical and tribological properties of CrSiCN coatings in water lubrication
Zhiwei Wu et al.
APPLIED SURFACE SCIENCE (2015)
Wear resistance investigation of titanium nitride-based coatings
Eleonora Santecchia et al.
CERAMICS INTERNATIONAL (2015)
Investigation of mechanical and tribological behaviors of multilayer graphene reinforced Ni3Al matrix composites
Wenzheng Zhai et al.
COMPOSITES PART B-ENGINEERING (2015)
Mechanical and tribological properties of self-lubricating metal matrix nanocomposites reinforced by carbon nanotubes (CNTs) and graphene - A review
Afsaneh Dorri Moghadam et al.
COMPOSITES PART B-ENGINEERING (2015)
An efficient computational approach to evaluate the ratcheting performance of rail steels under cyclic rolling contact in service
Chung Lun Pun et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2015)
Surface Modifications for Improved Wear Performance in Artificial Joints: A Review
Stacey J. L. Sullivan et al.
JOM (2015)
Surface composites by friction stir processing: A review
Vipin Sharma et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
Mechanically alloyed Al7075-TiC nanocomposite: Powder processing, consolidation and mechanical strength
Amin Azimi et al.
MATERIALS & DESIGN (2015)
Metallic implant biomaterials
Qizhi Chen et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2015)
2D-nanomaterials for controlling friction and wear at interfaces
Jessica C. Spear et al.
NANO TODAY (2015)
Tribological investigation of diamond-like carbon coated micro-dimpled surface under bovine serum and osteoarthritis oriented synovial fluid
Subir Ghosh et al.
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2015)
Tailoring the mechanical and tribological properties of sputtered boron carbide films via the B1-xCx composition
J. C. Qian et al.
SURFACE & COATINGS TECHNOLOGY (2015)
Tribological properties of laser surface textured and plasma electrolytic oxidation duplex-treated Ti6Al4V alloy deposited with MoS2 film
Yongkun Qin et al.
SURFACE & COATINGS TECHNOLOGY (2015)
Improving tribological properties of titanium alloys by combining laser surface texturing and diamond-like carbon film
Dongqing He et al.
TRIBOLOGY INTERNATIONAL (2015)
Effects of Tungsten Doping Contents on Tribological Behaviors of Tungsten-Doped Diamond-Like Carbon Coatings Lubricated by MoDTC
Wen Yue et al.
TRIBOLOGY LETTERS (2015)
Tribological Performance of Ni3Al Self-Lubricating Composites with Different Content of TiC at Elevated Temperature
Wenzheng Zhai et al.
TRIBOLOGY TRANSACTIONS (2015)
Tribological Performance and Coating Characteristics of Sputter-Deposited Ti-Doped MoS2 in Rolling and Sliding Contact
H. Singh et al.
TRIBOLOGY TRANSACTIONS (2015)
Wear debris and electrical resistance in textured Sn-coated Cu contacts subjected to fretting
K. E. Trinh et al.
WEAR (2015)
Correlations between the abrasive wear, fatigue, and tensile properties of filler-dispersed polyamide 6
Yusuke Morioka et al.
WEAR (2015)
Oil film lifetime and wear particle analysis of laser-patterned stainless steel surfaces
Andreas Rosenkranz et al.
WEAR (2015)
Mechanical properties, sliding wear and solid particle erosion behaviors of plasma enhanced magnetron sputtering CrSiCN coating systems
Feng Cai et al.
WEAR (2015)
Graphene: a multipurpose material for protective coatings
Md J. Nine et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
A comparative study of sliding wear of nonmetallic dental restorative materials with emphasis on micromechanical wear mechanisms
Nataliya Deyneka Dupriez et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2015)
Investigation on the Tribological Behavior and Wear Mechanism of Five Different Veneering Porcelains
Jie Min et al.
PLOS ONE (2015)
Bio-inspired scale-like surface textures and their tribological properties
Christian Greiner et al.
BIOINSPIRATION & BIOMIMETICS (2015)
Extraordinary Macroscale Wear Resistance of One Atom Thick Graphene Layer
Diana Berman et al.
ADVANCED FUNCTIONAL MATERIALS (2014)
Evolution of self-organization in nano-structured PVD coatings under extreme tribological conditions
G. Fox-Rabinovich et al.
APPLIED SURFACE SCIENCE (2014)
Enhanced tribological properties of MWCNT/Ni bulk composites - Influence of processing on friction and wear behaviour
Sebastian Suarez et al.
CARBON (2014)
Preparation and tribological properties of TiAl matrix composites reinforced by multilayer graphene
Zengshi Xu et al.
CARBON (2014)
Ultraviolet laser patterning of porous silicon
Fidel Vega et al.
JOURNAL OF APPLIED PHYSICS (2014)
Effect of graphene nanoplate addition on the tribological performance of Ni3Al matrix composites
Wenzheng Zhai et al.
JOURNAL OF COMPOSITE MATERIALS (2014)
Plasticity- Controlled Friction and Wear in Nanocrystalline SiC
Maneesh Mishra et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2014)
Laser-Assisted Cold-Sprayed Corrosion- and Wear-Resistant Coatings: A Review
E. O. Olakanmi et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2014)
Fabrication and Characterization of Thermal-Sprayed Fe-Based Amorphous/Nanocrystalline Composite Coatings: An Overview
Wenmin Guo et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2014)
Superlubricity of two-dimensional fluorographene/MoS2 heterostructure: a first-principles study
Lin-Feng Wang et al.
NANOTECHNOLOGY (2014)
Synergetic lubricating effect of MoS2 and Ti3SiC2 on tribological properties of NiAl matrix self-lubricating composites over a wide temperature range
Xiaoliang Shi et al.
MATERIALS & DESIGN (2014)
Tribological performance of TiAl matrix self-lubricating composites containing Ag, Ti3SiC2 and BaF2/CaF2 tested from room temperature to 600 °C
Xiaoliang Shi et al.
MATERIALS & DESIGN (2014)
Tribological behavior of Ni3Al matrix self-lubricating composites containing WS2, Ag and hBN tested from room temperature to 800 °C
Xiaoliang Shi et al.
MATERIALS & DESIGN (2014)
Graphene: a new emerging lubricant
Diana Berman et al.
MATERIALS TODAY (2014)
Influence on friction behavior of micro-texturing under lubricated non-conformal contact
Dawit Zenebe Segu et al.
MECCANICA (2014)
Microstructures and properties of high-entropy alloys
Yong Zhang et al.
PROGRESS IN MATERIALS SCIENCE (2014)
Laser processing of Fe based bulk amorphous alloy coating on zirconium
Himanshu Sahasrabudhe et al.
SURFACE & COATINGS TECHNOLOGY (2014)
Wear resistance optimisation of composite coatings by computational microstructural modelling
Kenneth Holmberg et al.
SURFACE & COATINGS TECHNOLOGY (2014)
New estimate of phase sequence in diffusive layer formed on plasma nitrided Ti-6Al-4V alloy
J. Morgiel et al.
SURFACE & COATINGS TECHNOLOGY (2014)
Global energy consumption due to friction in trucks and buses
Kenneth Holmberg et al.
TRIBOLOGY INTERNATIONAL (2014)
Efficiency of laser surface texturing in the reduction of friction under mixed lubrication
Daniel Braun et al.
TRIBOLOGY INTERNATIONAL (2014)
Effect of Ag and Ti3SiC2 on Tribological Properties of TiAl Matrix Self-lubricating Composites at Room and Increased Temperatures
Zengshi Xu et al.
TRIBOLOGY LETTERS (2014)
Friction and Wear Properties of TiAl-Ti3SiC2-MoS2 Composites Prepared by Spark Plasma Sintering
Wenzheng Zhai et al.
TRIBOLOGY TRANSACTIONS (2014)
The oxidation behavior and tribological properties of Si-implanted TiN coating
Bin Deng et al.
VACUUM (2014)
Microstructure and tribological properties of W-implanted PVD TiN coatings on 316L stainless steel
Bin Tian et al.
VACUUM (2014)
Experimental and numerical wear studies of porous Reactive Plasma Sprayed Ti-6Al-4V/TiN composite coating
H. Proudhon et al.
WEAR (2014)
Grain refinement: A mechanism for graphene nanoplatelets to reduce friction and wear of Ni3Al matrix self-lubricating composites
Wenzheng Zhai et al.
WEAR (2014)
Tribological behaviors of NiAl based self-lubricating composites containing different solid lubricants at elevated temperatures
Xiaoliang Shi et al.
WEAR (2014)
Synthesis of Au-MoS2 Nanocomposites: Thermal and Friction-Induced Changes to the Structure
T. W. Scharf et al.
ACS APPLIED MATERIALS & INTERFACES (2013)
The microstructure, mechanical and tribological properties of TiN coatings after Nb and C ion implantation
Bin Deng et al.
APPLIED SURFACE SCIENCE (2013)
Deposition of titanium nitride layers by electric arc - Reactive plasma spraying method
Viorel-Aurel Serban et al.
APPLIED SURFACE SCIENCE (2013)
The effect of surface texturing on reducing the friction and wear of steel under lubricated sliding contact
Wei Tang et al.
APPLIED SURFACE SCIENCE (2013)
The effect of multi-scale laser textured surface on lubrication regime
Dawit Zenebe Segu et al.
APPLIED SURFACE SCIENCE (2013)
A Novel strategy to enhance micro/nano-tribological properties of DLC film by combining micro-pattern and thin ionic liquids film
Wenjie Zhao et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2013)
The history of hard CVD coatings for tool applications at the University of Technology Vienna
Roland Haubner
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2013)
Electroless nickel, alloy, composite and nano coatings - A critical review
Jothi Sudagar et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2013)
THE WEAR OF POLISHED AND GLAZED ZIRCONIA AGAINST ENAMEL
Sridhar Janyavula et al.
JOURNAL OF PROSTHETIC DENTISTRY (2013)
Characterization of heat treated wood species
Trisna Priadi et al.
MATERIALS & DESIGN (2013)
Materials selection in design of structures and engines of supersonic aircrafts: A review
Zainul Huda et al.
MATERIALS & DESIGN (2013)
Influence of Ti3SiC2 content on tribological properties of NiAl matrix self-lubricating composites
Xiaoliang Shi et al.
MATERIALS & DESIGN (2013)
Nanoscale wear as a stress-assisted chemical reaction
Tevis D. B. Jacobs et al.
NATURE NANOTECHNOLOGY (2013)
Improving the internal stress and wear resistance of DLC film by low content Ti doping
Li Qiang et al.
SOLID STATE SCIENCES (2013)
Fabrication of Ti-Cu-Al coatings with amorphous microstructure on Ti-6Al-4 V alloy substrate via high-energy mechanical alloying method
C. Chen et al.
SURFACE & COATINGS TECHNOLOGY (2013)
Combining thermal spraying and PVD technologies: A new approach of duplex surface engineering for Ti alloys
Fabrizio Casadei et al.
SURFACE & COATINGS TECHNOLOGY (2013)
Reactive HVOF sprayed TiN-matrix composite coating and its corrosion and wear resistance properties
Jing Ma et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2013)
Effects of surface texturing on friction and vibration behaviors of sliding lubricated concentrated point contacts under linear reciprocating motion
U. Sudeep et al.
TRIBOLOGY INTERNATIONAL (2013)
Scratch resistance analysis of plasma-nitrided Ti-6Al-4V alloy
K. Farokhzadeh et al.
WEAR (2013)
Mild-to-severe wear transition and transition region of oxidative wear in steels
S. Q. Wang et al.
WEAR (2013)
Influence of surface texturing and hard chromium coating on the wear of steels used in cold rolling mill rolls
J. D. B. De Mello et al.
WEAR (2013)
Effect of rare earth elements addition on the tribological behavior of AZ91D magnesium alloy at elevated temperatures
A. Zafari et al.
WEAR (2013)
Tribological behavior of TiAl matrix self-lubricating composites containing silver from 25 to 800 °C
Xiaoliang Shi et al.
WEAR (2013)
Current status of zirconia restoration
Takashi Miyazaki et al.
JOURNAL OF PROSTHODONTIC RESEARCH (2013)
Tooth wear against ceramic crowns in posterior region: a systematic literature review
Rim Hmaidouch et al.
INTERNATIONAL JOURNAL OF ORAL SCIENCE (2013)
Wear-Resistant Nanoscale Silicon Carbide Tips for Scanning Probe Applications
Mark A. Lantz et al.
ADVANCED FUNCTIONAL MATERIALS (2012)
A comparative study on wear behavior of TiN and diamond coated WC-Co substrates against hypereutectic Al-Si alloys
G. V. Chakravarthy et al.
APPLIED SURFACE SCIENCE (2012)
Effects of vanadium ion implantation on microstructure, mechanical and tribological properties of TiN coatings
Bin Deng et al.
APPLIED SURFACE SCIENCE (2012)
Effect of active screen plasma nitriding pretreatment on wear behavior of TiN coating deposited by PACVD technique
M. Raoufi et al.
APPLIED SURFACE SCIENCE (2012)
Wear of UHMWPE against nitrogen-ion-implanted and NbN-coated Co-Cr-Mo alloy formed by plasma immersion ion implantation and deposition for artificial joints
Won-Woong Park et al.
APPLIED SURFACE SCIENCE (2012)
Suppression of wear in graphene polymer composites
Sashi S. Kandanur et al.
CARBON (2012)
Effect of removing internal residual metallic phases on wear resistance of polycrystalline diamond compacts
Chengliang Liu et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2012)
A slip-line plasticity analysis of abrasive wear of a smooth and soft surface sliding against a rough (fractal) and hard surface
X. Yin et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2012)
Duplex Hardening of Steels for Aeroengine Bearings
Steve Ooi et al.
ISIJ INTERNATIONAL (2012)
Tribological properties of ultrafine-grained materials processed by severe plastic deformation
Nong Gao et al.
JOURNAL OF MATERIALS SCIENCE (2012)
Nanostructured β-phase Ti-31.0Fe-9.0Sn and sub-μm structured Ti-39.3Nb-13.3Zr-10.7Ta alloys for biomedical applications: Microstructure benefits on the mechanical and corrosion performances
Anna Hynowska et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2012)
Effectiveness and design of surface texturing for different lubrication regimes
B. Podgornik et al.
MECCANICA (2012)
Preparation and Tribological Properties of Polyamide 11/Graphene Coatings
Bingli Pan et al.
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2012)
Microstructure and mechanical properties of quaternary Cr-Si-O-N films by a hybrid coating system
Jeong Doo Lee et al.
SURFACE & COATINGS TECHNOLOGY (2012)
Effective solution for the tribological problems of Ti-6Al-4V: Combination of laser surface texturing and solid lubricant film
Tianchang Hu et al.
SURFACE & COATINGS TECHNOLOGY (2012)
Microstructure evolution and mechanical properties of Ti-B-N coatings deposited by plasma-enhanced chemical vapor deposition
Jung Ho Shin et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2012)
Parametric study of texturing in convergent bearings
M. T. Fowell et al.
TRIBOLOGY INTERNATIONAL (2012)
Global energy consumption due to friction in passenger cars
Kenneth Holmberg et al.
TRIBOLOGY INTERNATIONAL (2012)
Metallic ions released from stainless steel, nickel-free, and titanium orthodontic alloys: Toxicity and DNA damage
Antonio Jose Ortiz et al.
AMERICAN JOURNAL OF ORTHODONTICS AND DENTOFACIAL ORTHOPEDICS (2011)
Effects of pulsed bias duty ratio on microstructure and mechanical properties of TiN/TiAlN multilayer coatings
Yongqiang Wei et al.
APPLIED SURFACE SCIENCE (2011)
Surface modification of Al-20Si alloy by high current pulsed electron beam
Y. Hao et al.
APPLIED SURFACE SCIENCE (2011)
Comparison of tribological properties of CrN, TiCN and TiAlN coatings sliding against SiC balls in water
Qianzhi Wang et al.
APPLIED SURFACE SCIENCE (2011)
Resin composite-State of the art
Jack L. Ferracane
DENTAL MATERIALS (2011)
Wear behavior of Fe-based bulk metallic glass composites
D. H. Kwon et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2011)
Tribology of electroless nickel coatings - A review
Prasanta Sahoo et al.
MATERIALS & DESIGN (2011)
Effect of different ion beam energy on properties of amorphous carbon film fabricated by ion beam sputtering deposition (IBSD)
Lichun Bai et al.
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS (2011)
Functionalized imidazolium wear-resistant ionic liquid ultrathin films for MEMS/NEMS applications
Yufei Mo et al.
SURFACE AND INTERFACE ANALYSIS (2011)
Friction and wear properties of TiCN coatings sliding against SiC and steel balls in air and water
Qianzhi Wang et al.
THIN SOLID FILMS (2011)
Lubrication and wear modelling of artificial hip joints: A review
L. Mattei et al.
TRIBOLOGY INTERNATIONAL (2011)
The influence of low-energy ion bombardment on the microstructure development and mechanical properties of TiBx coatings
Marian Mikula et al.
VACUUM (2011)
Size prediction of particles caused by chipping wear of hard coatings
Kun Zhou et al.
WEAR (2011)
In situ monitoring and depth-resolved characterization of wet wear of silicon carbide
V. Presser et al.
WEAR (2011)
Enhancing the wear resistance of sintered WC-Co composite by adding pseudo-elastic TiNi constituent
Y. Pan et al.
WEAR (2011)
Friction and wear behavior of laser textured surface under lubricated initial point contact
Andriy Kovalchenko et al.
WEAR (2011)
Load-Carrying Capacity Analysis for Sinusoidal Surfaces Hydrodynamic Bearing
Jianxi Yang et al.
MANUFACTURING SCIENCE AND TECHNOLOGY, PTS 1-3 (2011)
Effect of Carbon-doping on Microstructure and Friction/Wear Behaviors of TiB2 Films
X. L. Xin et al.
FUNCTIONAL AND ELECTRONIC MATERIALS (2011)
Method for Characterizing Nanoscale Wear of Atomic Force Microscope Tips
Jingjing Liu et al.
ACS NANO (2010)
Friction and wear mechanisms in MoS2/Sb2O3/Au nanocomposite coatings
T. W. Scharf et al.
ACTA MATERIALIA (2010)
Sliding wear of nanocrystalline Ni-W: Structural evolution and the apparent breakdown of Archard scaling
Timothy J. Rupert et al.
ACTA MATERIALIA (2010)
Development of electroless Ni-Zn-P/nano-TiO2 composite coatings and their properties
S. Ranganatha et al.
APPLIED SURFACE SCIENCE (2010)
Effect of Si addition on microstructure and mechanical properties of Ti-Al-N coating
She Q. Wang et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2010)
Ultralow nanoscale wear through atom-by-atom attrition in silicon-containing diamond-like carbon
Harish Bhaskaran et al.
NATURE NANOTECHNOLOGY (2010)
Sliding wear of weld layers with application to cane mill shaft rebuilding
J. J. Coronado et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2010)
Preventing Nanoscale Wear of Atomic Force Microscopy Tips Through the Use of Monolithic Ultrananocrystalline Diamond Probes
J. Liu et al.
SMALL (2010)
Improvement in the properties of nickel by nano-Cr2O3 incorporation
Meenu Srivastava et al.
SURFACE & COATINGS TECHNOLOGY (2010)
Finite element and dimensional analysis algorithm for the prediction of mechanical properties of bulk materials and thin films
Sara Aida Rodriguez Pulecio et al.
SURFACE & COATINGS TECHNOLOGY (2010)
A novel electroless plating of Ni-P-TiO2 nano-composite coatings
Weiwei Chen et al.
SURFACE & COATINGS TECHNOLOGY (2010)
Sliding wear behavior of Cu50Hf41.5Al8.5 bulk metallic glass
Dharma R. Maddala et al.
WEAR (2010)
Microstructural Characterisation and Wear Behaviour of Diamond Composite Materials
James N. Boland et al.
MATERIALS (2010)
Preparation and properties of electroless Ni-P-SiO2 composite coatings
D. Dong et al.
APPLIED SURFACE SCIENCE (2009)
Effect of anion on micro/nano-tribological properties of ultra-thin imidazolium ionic liquid films on silicon wafer
Wenjie Zhao et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2009)
Fut2-null mice display an altered glycosylation profile and impaired BabA-mediated Helicobacter pylori adhesion to gastric mucosa
Ana Magalhaes et al.
GLYCOBIOLOGY (2009)
An energy-based model to predict wear in nanocrystalline diamond atomic force microscopy tips
R. Agrawal et al.
JOURNAL OF APPLIED PHYSICS (2009)
Modeling of the transient responses of the vocal fold lamina propria
Kai Zhang et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2009)
Mechanical and tribological properties of duplex treated TiN, nc-TiN/a-SiNx and nc-TiCN/a-SiCN coatings deposited on 410 low alloy stainless steel
S. Guruvenket et al.
SURFACE & COATINGS TECHNOLOGY (2009)
Effects of combined plasma-carburizing and shot-peening on fatigue and wear properties of Ti-6Al-4V alloy
N. Tsuji et al.
SURFACE & COATINGS TECHNOLOGY (2009)
Increasing nanohardness and reducing friction of nitride steel by laser surface texturing
E. Gualtieri et al.
TRIBOLOGY INTERNATIONAL (2009)
Preliminary investigation of the effect of dimple size on friction in line contacts
Xiaolei Wang et al.
TRIBOLOGY INTERNATIONAL (2009)
Surface texturing by pulsed Nd:YAG laser
L. M. Vilhena et al.
TRIBOLOGY INTERNATIONAL (2009)
Growth defects in PVD hard coatings
P. Panjan et al.
VACUUM (2009)
Influence of the spring stiffness on friction and wear behaviours of stainless steel/copper-impregnated metallized carbon couple with electrical current
T. Ding et al.
WEAR (2009)
Control of tribological properties of diamond-like carbon films with femtosecond-laser-induced nanostructuring
Naoki Yasumaru et al.
APPLIED SURFACE SCIENCE (2008)
Microstructure and corrosion behavior of electroless deposited Ni-P/CeO2 coating
Hui Ming Jin et al.
CHINESE CHEMICAL LETTERS (2008)
Advances in engineered surfaces for functional performance
A. A. G. Bruzzone et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2008)
The effect of deposition temperature on microstructure and properties of thermal CVD TiN coatings
J. Wagner et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2008)
Nanocrystalline coating design for extreme applications based on the concept of complex adaptive behavior
G. S. Fox-Rabinovich et al.
JOURNAL OF APPLIED PHYSICS (2008)
Studies on nanocrystalline TiN coatings prepared by reactive plasma spraying
Dong Yanchun et al.
JOURNAL OF NANOMATERIALS (2008)
The role of lubricants, scanning velocity and operating environment in adhesion, friction and wear of Pt-Ir coated probes for atomic force microscope probe-based ferroelectric recording technology
Bharat Bhushan et al.
JOURNAL OF PHYSICS-CONDENSED MATTER (2008)
Friction behavior of dental porcelain with different leucite particle sizes
Yi Zhang et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2008)
Effect of metal-free phosphorus anti-wear compounds on passenger car emissions and fuel economy
Mark T. Devlin et al.
LUBRICATION SCIENCE (2008)
X-ray diffraction, optical microscopy, and microhardness studies of gas nitrided titanium alloys and titanium aluminide
W. Sha et al.
MATERIALS CHARACTERIZATION (2008)
Atomistic wear in a single asperity sliding contact
Bernd Gotsmann et al.
PHYSICAL REVIEW LETTERS (2008)
Novel aluminum-rich Ti1-xAlxN coatings by LPCVD
I. Endler et al.
SURFACE & COATINGS TECHNOLOGY (2008)
Development and characterization of low friction coatings for protection against fretting wear in aerospace components
Alexander M. Korsunsky et al.
THIN SOLID FILMS (2008)
Coefficients of friction of TiN coatings with preferred grain orientations under dry condition
Akira Azushima et al.
WEAR (2008)
Tribological investigation of coatings for artificial joints
Mohammed Hoseini et al.
WEAR (2008)
Friction and wear behavior of electroless Ni-P and Ni-W-P alloy coatings
M. Palaniappa et al.
WEAR (2008)
Increase of traction coefficient due to surface microtexture
Toshikazu Nanbu et al.
TRIBOLOGY LETTERS (2008)
Tribological and mechanical properties of high power laser surface-treated metallic glasses
D. T. A. Matthews et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Wear particles, periprosthetic osteolysis and the immune system
Stuart B. Goodman
BIOMATERIALS (2007)
Wear characteristics of diamond-coated atomic force microscope probe
Koo-Hyun Chung et al.
ULTRAMICROSCOPY (2007)
Multiscale friction mechanisms and hierarchical surfaces in nano- and bio-tribology
Michael Nosonovsky et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2007)
Wear detection of candidate MEMS/NEMS lubricant films using atomic force microscopy-based surface potential measurements
Manuel Palacio et al.
SCRIPTA MATERIALIA (2007)
Velocity dependence of nanoscale wear in atomic force microscopy
Bharat Bhushan et al.
APPLIED PHYSICS LETTERS (2007)
Subsurface characteristics of an abraded Fe-0.4 wt%C pearlitic steel: A nanoindentation study
Futoshi Katsuki et al.
WEAR (2007)
Comparison of tribological behaviours of AlCrN and TiAlN coatings - Deposited by physical vapor deposition
J. L. Mo et al.
WEAR (2007)
Tribological properties of graphite- and ZrC-reinforced bulk metallic glass composites
Marco E. Siegrist et al.
INTERMETALLICS (2007)
Hydrodynamic lubrication of textured steel surfaces under reciprocating sliding conditions
H. L. Costa et al.
TRIBOLOGY INTERNATIONAL (2007)
Microlubrication effect by laser-textured steel surfaces
P. Andersson et al.
WEAR (2007)
The influence of boron content on the tribological performance of Ti-N-B coatings prepared by thermal CVD
J. Wagner et al.
SURFACE & COATINGS TECHNOLOGY (2006)
Oxidation and wear behaviors of Ti-based thin films
J. H. Hsieh et al.
SURFACE & COATINGS TECHNOLOGY (2006)
Microstructural design of hard coatings
Paul H. Mayrhofer et al.
PROGRESS IN MATERIALS SCIENCE (2006)
Influence of ion bombardment on critical load of CrN film deposited onto aluminum alloy by arc ion plating method
Daisuke Yonekura et al.
INTERNATIONAL JOURNAL OF MODERN PHYSICS B (2006)
Tribology of diamond-like carbon films: recent progress and future prospects
Ali Erdemir et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2006)
Electroless Ni-P-SiC composite coatings with superfine particles
JQ Gao et al.
SURFACE & COATINGS TECHNOLOGY (2006)
Mechanical and tribological properties of CrTiCu(B,N) glassy-metal coatings deposited by reactive magnetron sputtering
C Tsotsos et al.
SURFACE & COATINGS TECHNOLOGY (2006)
Sliding wear resistance of reactive plasma sprayed Ti-TiN coatings
F Borgioli et al.
WEAR (2006)
Magnetic and transport properties in layered Nd1-xSr1+xCoO4
SL Huang et al.
PHYSICAL REVIEW B (2006)
Hygroscopic and hydrolytic effects in dental polymer networks
JL Ferracane
DENTAL MATERIALS (2006)
Microstructure and tribological behaviour of super-hard Ti-Si-C-N nanocomposite coatings deposited by plasma enhanced chemical vapour deposition
DY Ma et al.
THIN SOLID FILMS (2006)
Different carbon based thin films and their microtribological behaviour in MEMS applications
R Bandorf et al.
SURFACE & COATINGS TECHNOLOGY (2005)
Hard tribological Ti-B-N, Ti-Cr-B-N, Ti-Si-B-N and Ti-Al-Si-B-N coatings
DV Shtansky et al.
SURFACE & COATINGS TECHNOLOGY (2005)
Bonding, degradation, and environmental effects on novel perfluoropolyether lubricants
ZH Tao et al.
WEAR (2005)
Behavior of fullerene-like WS2 nanoparticles under severe contact conditions
L Rapoport et al.
WEAR (2005)
Wear of conventional pearlitic and improved bainitic rail steels
KM Lee et al.
WEAR (2005)
Tribological propertie's of unbalanced magnetron sputtered nano-scale multilayer coatings TiAlN/VN and TiAlCrYN deposited on plasma nitrided steels
Q Luo et al.
SURFACE & COATINGS TECHNOLOGY (2005)
Laser interference metallurgy-periodic surface patterning and formation of intermetallics
F Mücklich et al.
INTERMETALLICS (2005)
The effect of laser surface texturing on transitions in lubrication regimes during unidirectional sliding contact
A Kovalchenko et al.
TRIBOLOGY INTERNATIONAL (2005)
Review of engineered tribological interfaces for improved boundary lubrication
A Erdemir
TRIBOLOGY INTERNATIONAL (2005)
Influence of yield strength and toughness on friction and wear of polycarbonate
YJ Mergler et al.
WEAR (2005)
Reactive plasma sprayed TiN coating and its tribological properties
WR Feng et al.
WEAR (2005)
The effect of laser texturing of steel surfaces and speed-load parameters on the transition of lubrication regime from boundary to hydrodynamic
A Kovalchenko et al.
TRIBOLOGY TRANSACTIONS (2004)
Vacuum heat treatment of electroless Ni-B coatings
CT Dervos et al.
MATERIALS LETTERS (2004)
Mimicking the lotus effect: Influence of double roughness structures and slender pillars
NA Patankar
LANGMUIR (2004)
Metal ion release from metal implants
T Hanawa
MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS (2004)
Tribological behavior of plasma-enhanced CVD a-C:H films.: Part II:: multinanolayers
P Gupta et al.
TRIBOLOGY INTERNATIONAL (2004)
Indentation response of fullerene-like CNx
J Fernandez-Palacio et al.
TRIBOLOGY INTERNATIONAL (2004)
Characterization of Ti-6Al-4V alloy modified by plasma carburizing process
TS Kim et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Nanotribological characterization of molecularly thick lubricant films for applications to MEMS/NEMS by AFM
HW Liu et al.
ULTRAMICROSCOPY (2003)
Electroless Ni-P composite coatings
JN Balaraju et al.
JOURNAL OF APPLIED ELECTROCHEMISTRY (2003)
Fundamental investigation of micro wear rate using an atomic force microscope
KH Chung et al.
TRIBOLOGY LETTERS (2003)
Tantalum as a buffer layer in diamond-like carbon coated artificial hip joints
M Kiuru et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2003)
Single layer and multilayer wear resistant coatings of (Ti,Al)N: a review
S PalDey et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Effect of surface texturing on friction reduction between ceramic and steel materials under lubricated sliding contact
M Wakuda et al.
WEAR (2003)
Tribological and electrochemical performance of PVD TiN coatings on the femoral head of Ti-6Al-4V artificial hip joints
C Liu et al.
SURFACE & COATINGS TECHNOLOGY (2003)
Friction and wear behavior of electroless Ni-based CNT composite coatings
LY Wang et al.
WEAR (2003)
Tribological properties of Ni-P-multi-walled carbon nanotubes electroless composite coating
WX Chen et al.
MATERIALS LETTERS (2003)
The mechanical properties of human dentin: A critical review and re-evaluation of the dental literature
JH Kinney et al.
CRITICAL REVIEWS IN ORAL BIOLOGY & MEDICINE (2003)
Influence of surface texture on boundary lubricated sliding contacts
U Pettersson et al.
TRIBOLOGY INTERNATIONAL (2003)
A comparative study on tribological behavior of TiN and TiAlN coatings prepared by arc ion plating technique
SY Yoon et al.
SURFACE & COATINGS TECHNOLOGY (2002)
Selection criteria for wear resistant powder coatings under extreme erosive wear conditions
P Kulu et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2002)
Single asperity tribochemical wear of silicon nitride studied by atomic force microscopy
W Maw et al.
JOURNAL OF APPLIED PHYSICS (2002)
Tribological behaviour of hard coatings deposited by arc-evaporation PVD
RJ Rodríguez et al.
VACUUM (2002)
Diamond-like amorphous carbon
J Robertson
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2002)
Comparison of wear characteristics of etched-silicon and carbon nanotube atomic-force microscopy probes
T Larsen et al.
APPLIED PHYSICS LETTERS (2002)
Soil adhesion and biomimetics of soil-engaging components: a review
LQ Ren et al.
JOURNAL OF AGRICULTURAL ENGINEERING RESEARCH (2001)
Improved anti-wear performance of nanostructured titanium boron nitride coatings
JL He et al.
WEAR (2001)
Tribological properties of plasma nitrided and hard coated AISI 4140 steel
B Podgornik et al.
WEAR (2001)
In-situ synthesis and wear performance of TiC particle reinforced composite coating on alloy Ti6Al4V
S Zhang et al.
SURFACE & COATINGS TECHNOLOGY (2001)
The effect of grain size on the wear properties of electrodeposited nanocrystalline nickel coatings
DH Jeong et al.
SCRIPTA MATERIALIA (2001)
On the significance of the H/E ratio in wear control:: a nanocomposite coating approach to optimised tribological behaviour
A Leyland et al.
WEAR (2000)
AFM studies on the difference in wear behavior between Si and SiO2 in KOH solution
F Katsuki et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2000)
The corrosion behaviour of macroparticle defects in arc bond-sputtered CrN/NbN superlattice coatings
HW Wang et al.
SURFACE & COATINGS TECHNOLOGY (2000)
Mechanical and tribological performance of MoS2 co-sputtered composites
MC Simmonds et al.
SURFACE & COATINGS TECHNOLOGY (2000)
Share Paper
