Related references
Note: Only part of the references are listed.Nanoscale periodic gradients generated by laser powder bed fusion of an AlSi10Mg alloy
Williams Lefebvre et al.
MATERIALS & DESIGN (2021)
Unravelling the multi-scale structure-property relationship of laser powder bed fusion processed and heat-treated AlSi10Mg
P. Van Cauwenbergh et al.
SCIENTIFIC REPORTS (2021)
Development of Precipitation Hardening Parameters for High Strength Alloy AA 7068
Julia Osten et al.
MATERIALS (2020)
Influence of particle morphology and size distribution on the powder flowability and laser powder bed fusion manufacturability of Ti-6Al-4V alloy
Salah Eddine Brika et al.
ADDITIVE MANUFACTURING (2020)
Fatigue strength assessment of as built AlSi10Mg manufactured by SLM with different build orientations
S. Beretta et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
High cycle fatigue performance of AlSi10mg alloy produced by selective laser melting
Z. W. Xu et al.
MECHANICS OF MATERIALS (2020)
Effect of post-process heat treatment on microstructure and properties of selective laser melted AlSi10Mg alloy
Longchao Zhuo et al.
MATERIALS LETTERS (2019)
Evaluation of surface/interface quality, microstructure and mechanical properties of hybrid additive-subtractive aluminium parts
Debajyoti Bhaduri et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2019)
Microstructure of selective laser melted AlSi10Mg alloy
Xihe Liu et al.
MATERIALS & DESIGN (2019)
Fatigue life prediction for AlSi10Mg components produced by selective laser melting
Ming Tang et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
The Effect of Stress Relief on the Mechanical and Fatigue Properties of Additively Manufactured AlSi10Mg Parts
Busisiwe J. Mfusi et al.
METALS (2019)
Revealing the Effects of Powder Reuse for Selective Laser Melting by Powder Characterization
Laura Cordova et al.
JOM (2019)
Study of heat treatment parameters for additively manufactured AlSi10Mg in comparison with corresponding cast alloy
Luca Girelli et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
The Effect of Selective Laser Melting Process Parameters on the Microstructure and Mechanical Properties of A16061 and AlSi10Mg Alloys
Ahmed H. Maamoun et al.
MATERIALS (2019)
Solute clustering and supersaturated solid solution of AlSi10Mg alloy fabricated by selective laser melting
Takashi Maeshima et al.
HELIYON (2019)
Fatigue properties of AlSi10Mg obtained by additive manufacturing: Defect-based modelling and prediction of fatigue strength
S. Romano et al.
ENGINEERING FRACTURE MECHANICS (2018)
Effect of heat treatments on fatigue property of selective laser melting AlSi10Mg
Changchun Zhang et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
A comparison of Selective Laser Melting with bulk rapid solidification of AlSi10Mg alloy
Silvia Marola et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Effect of thermal annealing on microstructure evolution and mechanical behavior of an additive manufactured AlSi10Mg part
Pin Yang et al.
JOURNAL OF MATERIALS RESEARCH (2018)
Changes in the microstructure and mechanical properties of additively manufactured AlSi10Mg alloy after exposure to elevated temperatures
Michaela Fousova et al.
MATERIALS CHARACTERIZATION (2018)
Microstructure, precipitates and hardness of selectively laser melted AlSi10Mg alloy before and after heat treatment
Le Zhou et al.
MATERIALS CHARACTERIZATION (2018)
Selective laser melting of AlSi10Mg alloy: influence of heat treatment condition on mechanical properties and microstructure
A. Iturrioz et al.
WELDING IN THE WORLD (2018)
On the fatigue strength enhancement of additive manufactured AlSi10Mg parts by mechanical and thermal post-processing
Sara Bagherifard et al.
MATERIALS & DESIGN (2018)
Fatigue properties and material characteristics of additively manufactured AlSiW10Mg-Effect of the contour parameter on the microstructure, density, residual stress, roughness and mechanical properties
Emilie Beevers et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Dynamic loading of direct metal laser sintered AlSi10Mg alloy: Strengthening behavior in different building directions
Amir Hadadzadeh et al.
MATERIALS & DESIGN (2018)
Columnar to equiaxed transition during direct metal laser sintering of AlSi10Mg alloy: Effect of building direction
Amir Hadadzadeh et al.
ADDITIVE MANUFACTURING (2018)
Electrical resistivity of additively manufactured AlSi10Mg for use in electric motors
Cassidy Silbernagel et al.
ADDITIVE MANUFACTURING (2018)
Effects of two-stage aging on the dimensional stability of Al-Cu-Mg alloy
Y. F. Song et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Direction and location dependency of selective laser melted AlSi10Mg specimens
Leonhard Hitzler et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Change in microstructure of selectively laser melted AlSi10Mg alloy with heat treatments
Naoki Takata et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Fatigue of AlSi10Mg specimens fabricated by additive manufacturing selective laser melting (AM-SLM)
Naor Elad Uzan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
On microstructure and mechanical properties of additively manufactured AlSi10Mg_200C using recycled powder
Hamed Asgari et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Influence of additive multilayer feature on thermodynamics, stress and microstructure development during laser 3D printing of aluminum-based material
Donghua Dai et al.
SCIENCE BULLETIN (2017)
On the Selective Laser Melting (SLM) of the AlSi10Mg Alloy: Process, Microstructure, and Mechanical Properties
Francesco Trevisan et al.
MATERIALS (2017)
Changing the alloy composition of A17075 for better processability by selective laser melting
Maria L. Montero Sistiaga et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
Improving the fatigue behaviour of a selectively laser melted aluminium alloy: Influence of heat treatment and surface quality
Nesma T. Aboulkhair et al.
MATERIALS & DESIGN (2016)
Failure mechanisms of additively manufactured porous biomaterials: Effects of porosity and type of unit cell
J. Kadkhodapour et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2015)
Microstructure and mechanical properties of aluminium alloy cellular lattice structures manufactured by direct metal laser sintering
Chunze Yan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
On the Precipitation Hardening of Selective Laser Melted AlSi10Mg
Nesma T. Aboulkhair et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2015)
Electron beam welding of AlSi10Mg workpieces produced by selected laser melting additive manufacturing technology
Moshe Nahmany et al.
ADDITIVE MANUFACTURING (2015)
Metal Additive Manufacturing: A Review
William E. Frazier
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2014)
Characterization and modeling of the influence of artificial aging on the microstructural evolution of age-hardenable AlSi10Mg(Cu) aluminum alloys
X. Larrayoz Izcara et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Microstructure and mechanical properties of Al-12Si produced by selective laser melting: Effect of heat treatment
K. G. Prashanth et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Microstructure and Mechanical Properties of AlSi10Mg Parts Produced by the Laser Beam Additive Manufacturing (AM) Technology
Idan Rosenthal et al.
METALLOGRAPHY MICROSTRUCTURE AND ANALYSIS (2014)
The conflicts between strength and toughness
Robert O. Ritchie
NATURE MATERIALS (2011)
Correlation of Yield Strength and Tensile Strength with Hardness for Steels
E. J. Pavlina et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2008)
Share Paper
