Related references
Note: Only part of the references are listed.Insight to defects regulation on sugarcane waste-derived hard carbon anode for sodium-ion batteries
Kaihua Yu et al.
JOURNAL OF ENERGY CHEMISTRY (2021)
Developing an Interpenetrated Porous and Ultrasuperior Hard-Carbon Anode via a Promising Molten-Salt Evaporation Method
Zhaohua Wang et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Hyperaccumulation Route to Ca-Rich Hard Carbon Materials with Cation Self-Incorporation and Interlayer Spacing Optimization for High-Performance Sodium-Ion Batteries
Kaihua Yu et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Chemically Presodiated Hard Carbon Anodes with Enhanced Initial Coulombic Efficiencies for High-Energy Sodium Ion Batteries
Mengchuang Liu et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Co-Construction of Sulfur Vacancies and Heterojunctions in Tungsten Disulfide to Induce Fast Electronic/Ionic Diffusion Kinetics for Sodium-Ion Batteries
Yu Li et al.
ADVANCED MATERIALS (2020)
Analysis of the Stable Interphase Responsible for the Excellent Electrochemical Performance of Graphite Electrodes in Sodium-Ion Batteries
Zhaohua Wang et al.
SMALL (2020)
A revised mechanistic model for sodium insertion in hard carbons
Heather Au et al.
ENERGY & ENVIRONMENTAL SCIENCE (2020)
Superior sodium-storage behavior of flexible anatase TiO2 promoted by oxygen vacancies
Qiao Ni et al.
ENERGY STORAGE MATERIALS (2020)
Evolution of the electrochemical interface in sodium ion batteries with ether electrolytes
Kaikai Li et al.
NATURE COMMUNICATIONS (2019)
Low-Temperature Growth of Hard Carbon with Graphite Crystal for Sodium-Ion Storage with High Initial Coulombic Efficiency: A General Method
Xun Zhao et al.
ADVANCED ENERGY MATERIALS (2019)
Tuning nitrogen species in three-dimensional porous carbon via phosphorus doping for ultra-fast potassium storage
Hanna He et al.
NANO ENERGY (2019)
Multiple Active Sites of Carbon for High-Rate Surface-Capacitive Sodium-Ion Storage
Guang Wang et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)
Theoretical versus Practical Energy: A Plea for More Transparency in the Energy Calculation of Different Rechargeable Battery Systems (vol 9, 1803170, 2019)
Johannes Betz et al.
ADVANCED ENERGY MATERIALS (2019)
Engineering the trap effect of residual oxygen atoms and defects in hard carbon anode towards high initial Coulombic efficiency
Dan Sun et al.
NANO ENERGY (2019)
Presodiation Strategies and Their Effect on Electrode-Electrolyte Interphases for High-Performance Electrodes for Sodium-Ion Batteries
Iqra Moeez et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
High-Capacity Interstitial Mn-Incorporated MnxFe3-xO4/Graphene Nanocomposite for Sodium-Ion Battery Anodes
Haixia Ren et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
A Simple Electrode-Level Chemical Presodiation Route by Solution Spraying to Improve the Energy Density of Sodium-Ion Batteries
Xiaoxiao Liu et al.
ADVANCED FUNCTIONAL MATERIALS (2019)
Hierarchical Nanospheres Constructed by Ultrathin MoS2 Nanosheets Braced on Nitrogen-Doped Carbon Polyhedra for Efficient Lithium and Sodium Storage
Fengzhang Tu et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Engineering Al2O3 atomic layer deposition: Enhanced hard carbon-electrolyte interface towards practical sodium ion batteries
Haiyan Lu et al.
NANO ENERGY (2019)
Hard Carbon as Sodium-Ion Battery Anodes: Progress and Challenges
Biwei Xiao et al.
CHEMSUSCHEM (2019)
Deactivating Defects in Graphenes with Al2O3 Nanoclusters to Produce Long-Life and High-Rate Sodium-Ion Batteries
Qiaowei Lin et al.
ADVANCED ENERGY MATERIALS (2019)
Lotus Seedpod-Derived Hard Carbon with Hierarchical Porous Structure as Stable Anode for Sodium-Ion Batteries
Feng Wu et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Regulating Li deposition by constructing LiF-rich host for dendrite-free lithium metal anode
Yanxia Yuan et al.
ENERGY STORAGE MATERIALS (2019)
Moderately concentrated electrolyte improves solid-electrolyte interphase and sodium storage performance of hard carbon
Jagabandhu Patra et al.
ENERGY STORAGE MATERIALS (2019)
A S/N-doped high-capacity mesoporous carbon anode for Na-ion batteries
Xiu Li et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
Phosphorus-Doped Hard Carbon Nanofibers Prepared by Electrospinning as an Anode in Sodium-Ion Batteries
Feng Wu et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Expanding Interlayer Spacing of Hard Carbon by Natural K+ Doping to Boost Na-Ion Storage
Feng Wu et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Remarkable Effect of Sodium Alginate Aqueous Binder on Anatase TiO2 as High-Performance Anode in Sodium Ion Batteries
Liming Ling et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
N-Doping and Defective Nanographitic Domain Coupled Hard Carbon Nanoshells for High Performance Lithium/Sodium Storage
Shifei Huang et al.
ADVANCED FUNCTIONAL MATERIALS (2018)
Rational Design and General Synthesis of S-Doped Hard Carbon with Tunable Doping Sites toward Excellent Na-Ion Storage Performance
Zhensheng Hong et al.
ADVANCED MATERIALS (2018)
A porous biomass-derived anode for high-performance sodium-ion batteries
Youyu Zhu et al.
CARBON (2018)
Understanding the Electrochemical Mechanisms Induced by Gradient Mg2+ Distribution of Na-Rich Na3+xV2-xMgx(PO4)(3)/C for Sodium Ion Batteries
Hui Li et al.
CHEMISTRY OF MATERIALS (2018)
High capacity hard carbon derived from lotus stem as anode for sodium ion batteries
Nan Zhang et al.
JOURNAL OF POWER SOURCES (2018)
Ultrasound-assisted synthesis of sodium powder as electrode additive to improve cycling performance of sodium-ion batteries
Jialiang Tang et al.
JOURNAL OF POWER SOURCES (2018)
Mesoporous TiO2 microparticles formed by the oriented attachment of nanocrystals: A super-durable anode material for sodium-ion batteries
Liming Ling et al.
NANO RESEARCH (2018)
Electrolytes, SEI Formation, and Binders: A Review of Nonelectrode Factors for Sodium-Ion Battery Anodes
Clement Bommier et al.
SMALL (2018)
Lithium-Pretreated Hard Carbon as High-Performance Sodium-Ion Battery Anodes
Biwei Xiao et al.
ADVANCED ENERGY MATERIALS (2018)
Low-Defect and Low-Porosity Hard Carbon with High Coulombic Efficiency and High Capacity for Practical Sodium Ion Battery Anode
Lifen Xiao et al.
ADVANCED ENERGY MATERIALS (2018)
Elucidation of the Sodium-Storage Mechanism in Hard Carbons
Panxing Bai et al.
ADVANCED ENERGY MATERIALS (2018)
Expanded biomass-derived hard carbon with ultrastable performance in sodium-ion batteries
Ziyi Zhu et al.
JOURNAL OF MATERIALS CHEMISTRY A (2018)
Insights on the Na+ ion storage mechanism in hard carbon: Discrimination between the porosity, surface functional groups and defects
Camelia Matei Ghimbeu et al.
NANO ENERGY (2018)
Hard carbon anode materials for sodium-ion batteries
Ismaila El Moctar et al.
FUNCTIONAL MATERIALS LETTERS (2018)
A Flexible Sulfur-Enriched Nitrogen Doped Multichannel Hollow Carbon Nanofibers Film for High Performance Sodium Storage
Xizhen Sun et al.
SMALL (2018)
Exploring Sodium-Ion Storage Mechanism in Hard Carbons with Different Microstructure Prepared by Ball-Milling Method
Haiyan Lu et al.
SMALL (2018)
Sodium Ion Batteries: Stable Carbon-Selenium Bonds for Enhanced Performance in Tremella -Like 2D Chalcogenide Battery Anode (Adv. Energy Mater. 23/2018)
Yu Li et al.
Advanced Energy Materials (2018)
Pre-Oxidation-Tuned Microstructures of Carbon Anodes Derived from Pitch for Enhancing Na Storage Performance
Yaxiang Lu et al.
ADVANCED ENERGY MATERIALS (2018)
Honeycomb-like Hard Carbon Derived from Pine Pollen as High-Performance Anode Material for Sodium-Ion Batteries
Yanjia Zhang et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Marriage of an Ether-Based Electrolyte with Hard Carbon Anodes Creates Superior Sodium-Ion Batteries with High Mass Loading
Yongwu He et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Insight into Sodium Insertion and the Storage Mechanism in Hard Carbon
M. Anji Reddy et al.
ACS ENERGY LETTERS (2018)
Long cycle life and high rate sodium-ion chemistry for hard carbon anodes
Panxing Bai et al.
ENERGY STORAGE MATERIALS (2018)
Achieving superb sodium storage performance on carbon anodes through an ether-derived solid electrolyte interphase
Jun Zhang et al.
ENERGY & ENVIRONMENTAL SCIENCE (2017)
Three-dimensional N-doped graphene as anode material with superior cycle stability for sodium ion batteries
Zhihua Lin et al.
MATERIALS LETTERS (2017)
Mechanism of Na-Ion Storage in Hard Carbon Anodes Revealed by Heteroatom Doping
Zhifei Li et al.
ADVANCED ENERGY MATERIALS (2017)
Manipulating Adsorption-Insertion Mechanisms in Nanostructured Carbon Materials for High-Efficiency Sodium Ion Storage
Shen Qiu et al.
ADVANCED ENERGY MATERIALS (2017)
Mille-feuille shaped hard carbons derived from polyvinylpyrrolidone via environmentally friendly electrostatic spinning for sodium ion battery anodes
Ying Bai et al.
RSC ADVANCES (2017)
Sulfur-doped carbon employing biomass-activated carbon as a carrier with enhanced sodium storage behavior
Ganggang Zhao et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
Capacitance-enhanced sodium-ion storage in nitrogen-rich hard carbon
Rohit Ranganathan Gaddam et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
Boosting the rate capability of hard carbon with an ether-based electrolyte for sodium ion batteries
Yuan-En Zhu et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
Synthesis of hard carbon from argan shells for Na-ion batteries
Mouad Dahbi et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
Kelp-derived hard carbons as advanced anode materials for sodium-ion batteries
Pengzi Wang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
A high-performance sodium-ion battery enhanced by macadamia shell derived hard carbon anode
Yuheng Zheng et al.
NANO ENERGY (2017)
Synthesis of Hierarchically Porous Nitrogen-Doped Carbon for Sodium-Ion Batteries
Yang Liu et al.
CHEMELECTROCHEM (2017)
Polyanion-Type Electrode Materials for Sodium-Ion Batteries
Qiao Ni et al.
ADVANCED SCIENCE (2017)
Quick Activation of Nanoporous Anatase TiO2 as High-Rate and Durable Anode Materials for Sodium-Ion Batteries
Liming Ling et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Metal organic frameworks templated sulfur-doped mesoporous carbons as anode materials for advanced sodium ion batteries
Xiaodong Shi et al.
CARBON (2017)
Adsorption and Formation of Small Na Clusters on Pristine and Double-Vacancy Graphene for Anodes of Na-Ion Batteries
Zhicong Liang et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Tuning the Solid Electrolyte Interphase for Selective Li- and Na-Ion Storage in Hard Carbon
Fernando A. Soto et al.
ADVANCED MATERIALS (2017)
Multilayered Electride Ca2N Electrode via Compression Molding Fabrication for Sodium Ion Batteries
Guanghai Chen et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Routes to High Energy Cathodes of Sodium-Ion Batteries
Chun Fang et al.
ADVANCED ENERGY MATERIALS (2016)
Comparison between Na-Ion and Li-Ion Cells: Understanding the Critical Role of the Cathodes Stability and the Anodes Pretreatment on the Cells Behavior
Ezequiel de la Llave et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Enhanced Sodium Ion Storage Behavior of P2-Type Na2/3Fe1/2Mn1/2O2 Synthesized via a Chelating Agent Assisted Route
Ying Bai et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Na-Rich Na3+xV2-xNix(PO4)3/C for Sodium Ion Batteries: Controlling the Doping Site and Improving the Electrochemical Performances
Hui Li et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
3D-0D Graphene-Fe3O4 Quantum Dot Hybrids as High-Performance Anode Materials for Sodium-Ion Batteries
Huan Liu et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Scalable synthesis of self-standing sulfur-doped flexible graphene films as recyclable anode materials for low-cost sodium-ion batteries
Xiang Deng et al.
CARBON (2016)
Mechanistic insights into sodium storage in hard carbon anodes using local structure probes
Joshua M. Stratford et al.
CHEMICAL COMMUNICATIONS (2016)
Fundamental Mechanisms of Solvent Decomposition Involved in Solid-Electrolyte Interphase Formation in Sodium Ion Batteries
Hemant Kumar et al.
CHEMISTRY OF MATERIALS (2016)
Garlic peel derived high capacity hierarchical N-doped porous carbon anode for sodium/lithium ion cell
V. Selvamani et al.
ELECTROCHIMICA ACTA (2016)
Scalable process for application of stabilized lithium metal powder in Li-ion batteries
Guo Ai et al.
JOURNAL OF POWER SOURCES (2016)
Controllable synthesis of high-rate and long cycle-life Na3V2(PO4)3 for sodium-ion batteries
Hui Li et al.
JOURNAL OF POWER SOURCES (2016)
Ion-Catalyzed Synthesis of Microporous Hard Carbon Embedded with Expanded Nanographite for Enhanced Lithium/Sodium Storage
Zhi-Long Yu et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)
Origin of low sodium capacity in graphite and generally weak substrate binding of Na and Mg among alkali and alkaline earth metals
Yuanyue Liu et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2016)
Hard Carbon Microtubes Made from Renewable Cotton as High-Performance Anode Material for Sodium-Ion Batteries
Yunming Li et al.
ADVANCED ENERGY MATERIALS (2016)
A superior low-cost amorphous carbon anode made from pitch and lignin for sodium-ion batteries
Yunming Li et al.
JOURNAL OF MATERIALS CHEMISTRY A (2016)
A waste biomass derived hard carbon as a high-performance anode material for sodium-ion batteries
Pin Liu et al.
JOURNAL OF MATERIALS CHEMISTRY A (2016)
The importance of solid electrolyte interphase formation for long cycle stability full-cell Na-ion batteries
Xiaolin Li et al.
NANO ENERGY (2016)
Effect of Hexafluorophosphate and Fluoroethylene Carbonate on Electrochemical Performance and the Surface Layer of Hard Carbon for Sodium-Ion Batteries
Mouad Dahbi et al.
CHEMELECTROCHEM (2016)
Synthesis of Nitrogen-Doped Electrospun Carbon Nanofibers as Anode Material for High-Performance Sodium-Ion Batteries
Chen Chen et al.
ENERGY TECHNOLOGY (2016)
High Capacity of Hard Carbon Anode in Na-Ion Batteries Unlocked by POx Doping
Zhifei Li et al.
ACS ENERGY LETTERS (2016)
Hydrothermal synthesis of porous phosphorus-doped carbon nanotubes and their use in the oxygen reduction reaction and lithium-sulfur batteries
Guo Meng-qing et al.
NEW CARBON MATERIALS (2016)
Pitch-derived amorphous carbon as high performance anode for sodium-ion batteries
Yunming Li et al.
ENERGY STORAGE MATERIALS (2016)
Chemically Crushed Wood Cellulose Fiber towards High-Performance Sodium-Ion Batteries
Fei Shen et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
A Perylene Diimide Crystal with High Capacity and Stable Cyclability for Na-Ion Batteries
Wenwen Deng et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Hard Carbon Originated from Polyvinyl Chloride Nanofibers As High-Performance Anode Material for Na-Ion Battery
Ying Bai et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Low-Surface-Area Hard Carbon Anode for Na-Ion Batteries via Graphene Oxide as a Dehydration Agent
Wei Luo et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Sodium-Ion Storage in Pyroprotein-Based Carbon Nanoplates
Young Soo Yun et al.
ADVANCED MATERIALS (2015)
High-Performance Sodium Ion Batteries Based on a 3D Anode from Nitrogen-Doped Graphene Foams
Jiantie Xu et al.
ADVANCED MATERIALS (2015)
Nitrogen-doped carbon nanofibers derived from polyacrylonitrile for use as anode material in sodium-ion batteries
Jiadeng Zhu et al.
CARBON (2015)
On the high and low temperature performances of Na-ion battery materials: Hard carbon as a case study
A. Ponrouch et al.
ELECTROCHEMISTRY COMMUNICATIONS (2015)
Peanut shell derived hard carbon as ultralong cycling anodes for lithium and sodium batteries
Weiming Lv et al.
ELECTROCHIMICA ACTA (2015)
A high performance sulfur-doped disordered carbon anode for sodium ion batteries
Wei Li et al.
ENERGY & ENVIRONMENTAL SCIENCE (2015)
A Computational Chemical Insight into Microscopic Additive Effect on Solid Electrolyte Interphase Film Formation in Sodium-Ion Batteries: Suppression of Unstable Film Growth by Intact Fluoroethylene Carbonate
Norio Takenaka et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2015)
Lithium and Sodium Storage on Graphitic Carbon Nitride
Marlies Hankel et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2015)
Rapid synthesis of alpha-Fe2O3/rGO nanocomposites by microwave autoclave as superior anodes for sodium-ion batteries
Zhi-Jia Zhang et al.
JOURNAL OF POWER SOURCES (2015)
New Mechanistic Insights on Na-Ion Storage in Nongraphitizable Carbon
Clement Bommier et al.
NANO LETTERS (2015)
Ab initio study of sodium intercalation into disordered carbon
Ping-chun Tsai et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
Facile synthesis of high performance hard carbon anode materials for sodium ion batteries
Ning Sun et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
Amorphous monodispersed hard carbon micro-spherules derived from biomass as a high performance negative electrode material for sodium-ion batteries
Yunming Li et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
Low-defect Prussian blue nanocubes as high capacity and long life cathodes for aqueous Na-ion batteries
Xianyong Wu et al.
NANO ENERGY (2015)
Sulfur covalently bonded graphene with large capacity and high rate for high-performance sodium-ion batteries anodes
Xiaolei Wang et al.
NANO ENERGY (2015)
Hard Carbon Anodes for Na-Ion Batteries: Toward a Practical Use
George Hasegawa et al.
CHEMELECTROCHEM (2015)
Sulfur-Doped Carbon with Enlarged Interlayer Distance as a High-Performance Anode Material for Sodium-Ion Batteries
Long Qie et al.
ADVANCED SCIENCE (2015)
Towards greener and more sustainable batteries for electrical energy storage
D. Larcher et al.
NATURE CHEMISTRY (2015)
Defective Graphene as a High-Capacity Anode Material for Na- and Ca-Ion Batteries
Dibakar Datta et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
Enhancing the Li Storage Capacity and Initial Coulombic Efficiency for Porous Carbons by Sulfur Doping
Guoqing Ning et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
High-Density Sodium and Lithium Ion Battery Anodes from Banana Peels
Elmira Memarzadeh Lotfabad et al.
ACS NANO (2014)
Predicting capacity of hard carbon anodes in sodium-ion batteries using porosity measurements
Clement Bommier et al.
CARBON (2014)
Sodium carboxymethyl cellulose as a potential binder for hard-carbon negative electrodes in sodium-ion batteries
Mouad Dahbi et al.
ELECTROCHEMISTRY COMMUNICATIONS (2014)
In Silico Based Rank-Order Determination and Experiments on Nonaqueous Electrolytes for Sodium Ion Battery Applications
Ganesh Kamath et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2014)
Application of Stabilized Lithium Metal Powder (SLMP®) in graphite anode - A high efficient prelithiation method for lithium-ion batteries
Zhihui Wang et al.
JOURNAL OF POWER SOURCES (2014)
Biomass derived hard carbon used as a high performance anode material for sodium ion batteries
Kun-lei Hong et al.
JOURNAL OF MATERIALS CHEMISTRY A (2014)
Origin of non-SEI related coulombic efficiency loss in carbons tested against Na and Li
Elmira Memarzadeh Lotfabad et al.
JOURNAL OF MATERIALS CHEMISTRY A (2014)
Novel transition-metal-free cathode for high energy and power sodium rechargeable batteries
Haegyeom Kim et al.
NANO ENERGY (2014)
Carbon Nanosheet Frameworks Derived from Peat Moss as High Performance Sodium Ion Battery Anodes
Jia Ding et al.
ACS NANO (2013)
Sodium-Ion Batteries
Michael D. Slater et al.
ADVANCED FUNCTIONAL MATERIALS (2013)
A new room temperature and solvent free carbon coating procedure for battery electrode materials
Alexandre Ponrouch et al.
ENERGY & ENVIRONMENTAL SCIENCE (2013)
Surface-Driven Sodium Ion Energy Storage in Nanocellular Carbon Foams
Yuyan Shao et al.
NANO LETTERS (2013)
Probing the Failure Mechanism of SnO2 Nanowires for Sodium-Ion Batteries
Meng Gu et al.
NANO LETTERS (2013)
Electrochemical Performance of Porous Carbon/Tin Composite Anodes for Sodium-Ion and Lithium-Ion Batteries
Yunhua Xu et al.
ADVANCED ENERGY MATERIALS (2013)
Prussian blue: a new framework of electrode materials for sodium batteries
Yuhao Lu et al.
CHEMICAL COMMUNICATIONS (2012)
High capacity Na-storage and superior cyclability of nanocomposite Sb/C anode for Na-ion batteries
Jiangfeng Qian et al.
CHEMICAL COMMUNICATIONS (2012)
In search of an optimized electrolyte for Na-ion batteries
Alexandre Ponrouch et al.
ENERGY & ENVIRONMENTAL SCIENCE (2012)
Sodium Ion Insertion in Hollow Carbon Nanowires for Battery Applications
Yuliang Cao et al.
NANO LETTERS (2012)
Electrode Materials for Rechargeable Sodium-Ion Batteries: Potential Alternatives to Current Lithium-Ion Batteries
Sung-Wook Kim et al.
ADVANCED ENERGY MATERIALS (2012)
Fluorinated Ethylene Carbonate as Electrolyte Additive for Rechargeable Na Batteries
Shinichi Komaba et al.
ACS APPLIED MATERIALS & INTERFACES (2011)
Electrochemical Na Insertion and Solid Electrolyte Interphase for Hard-Carbon Electrodes and Application to Na-Ion Batteries
Shinichi Komaba et al.
ADVANCED FUNCTIONAL MATERIALS (2011)
Electrical Energy Storage for the Grid: A Battery of Choices
Bruce Dunn et al.
SCIENCE (2011)
A prelithiated carbon anode for lithium-ion battery applications
C. R. Jarvis et al.
JOURNAL OF POWER SOURCES (2006)
Electrochemical and infrared studies of the reduction of organic carbonates
XR Zhang et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2001)
The mechanisms of lithium and sodium insertion in carbon materials
DA Stevens et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2001)
An in situ small-angle X-ray scattering study of sodium insertion into a nanoporous carbon anode material within an operating electrochemical cell
DA Stevens et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2000)
High capacity anode materials for rechargeable sodium-ion batteries
DA Stevens et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2000)
Share Paper
