Related references
Note: Only part of the references are listed.Degradation of Styrenic Plastics During Recycling: Impact of Reprocessing Photodegraded Material on Aspect and Mechanical Properties
Charles Signoret et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2020)
Towards a more circular economy for WEEE plastics - Part B: Assessment of the technical feasibility of recycling strategies
F. Wagner et al.
WASTE MANAGEMENT (2019)
MIR spectral characterization of plastic to enable discrimination in an industrial recycling context: II. Specific case of polyolefins
Charles Signoret et al.
WASTE MANAGEMENT (2019)
Development of intelligent sorting system realized with the aid of laser-induced breakdown spectroscopy and hybrid preprocessing algorithm-based radial basis function neural networks for recycling black plastic wastes
Seok-Beom Roh et al.
JOURNAL OF MATERIAL CYCLES AND WASTE MANAGEMENT (2018)
Mechanical recycling: Compatibilization of mixed thermoplastic wastes
Joachim Maris et al.
POLYMER DEGRADATION AND STABILITY (2018)
THz imaging for recycling of black plastics
Andries Kueter et al.
TM-TECHNISCHES MESSEN (2018)
Mechanical properties and morphology of polypropylene/poly(acrylonitrile-butadiene-styrene) nanocomposites: Effect of compatibilizer and montmorillonite content
Mohamad Al Hafiz Ibrahim et al.
JOURNAL OF ELASTOMERS AND PLASTICS (2017)
Compatibilization Strategies for Recycling Applications of High Impact Polystyrene/Acrylonitrile Butadiene Blends
Yamila V. Vazquez et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2017)
Development of a new approach based on midwave infrared spectroscopy for post-consumer black plastic waste sorting in the recycling industry
Offer Rozenstein et al.
WASTE MANAGEMENT (2017)
Mechanical and chemical recycling of solid plastic waste
Kim Ragaert et al.
WASTE MANAGEMENT (2017)
Production, use, and fate of all plastics ever made
Roland Geyer et al.
SCIENCE ADVANCES (2017)
ABS/HIPS blends obtained from WEEE: Influence of processing conditions and composition
Adriana Martinelli Catelli de Souza et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2016)
Modeling the mechanical behavior and impact properties of polypropylene and copolymer polypropylene
J. L. Bouvard et al.
JOURNAL OF POLYMER RESEARCH (2016)
Influence of impurities on the performances of HIPS recycled from Waste Electric and Electronic Equipment (WEEE)
Didier Perrin et al.
WASTE MANAGEMENT (2016)
Disassembly properties and material characterisation of household small waste electric and electronic equipment
Maria D. Bovea et al.
WASTE MANAGEMENT (2016)
The Influence of Compatibilizer Addition and Gamma Irradiation on Mechanical and Rheological Properties of a Recycled WEEE Plastics Blend
Sandra Tostar et al.
RECYCLING (2016)
Characterizing plastics originating from WEEE: A case study in France
Elisabeth Maris et al.
MINERALS ENGINEERING (2015)
Life cycle assessment of post-consumer plastics production from waste electrical and electronic equipment (WEEE) treatment residues in a Central European plastics recycling plant
Patrick A. Waeger et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2015)
Forecasting waste compositions: A case study on plastic waste of electronic display housings
Jef R. Peeters et al.
WASTE MANAGEMENT (2015)
Compatibilization of Polypropylene/Poly(acrylonitrile-butadiene-styrene) Blends by Polypropylene-Graft-Cardanol
Yi Deng et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2015)
Influence of compatibilizer on mechanical, morphological and rheological properties of PP/ABS blends
Sateesh Bonda et al.
IRANIAN POLYMER JOURNAL (2014)
Substantial enhancement of PP random copolymer's thermal stability due to the addition of MWCNTs and nanodiamonds: Decomposition kinetics and mechanism study
E. Roumeli et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2014)
The Effect of Graft Copolymers of Maleic Anhydride and Epoxy Resin on the Mechanical Properties and Morphology of PP/ABS Blends
Zhu Luo et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2014)
Rapid discrimination of plastic packaging materials using MIR spectroscopy coupled with independent components analysis (ICA)
Amine Kassouf et al.
WASTE MANAGEMENT (2014)
Recycling of non-metallic fractions from waste electrical and electronic equipment (WEEE): A review
Ruixue Wang et al.
WASTE MANAGEMENT (2014)
Effects of accelerated aging and compatibilizers on the mechanical and morphological properties of polypropylene and poly(acrylonitrile-butadiene-styrene) blends
Yun Kyun Lee et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2013)
Study of the physico-chemical properties of recycled polymers from waste electrical and electronic equipment (WEEE) sorted by high resolution near infrared devices
Joana Beigbeder et al.
RESOURCES CONSERVATION AND RECYCLING (2013)
Plastic identification based on molecular and elemental information from laser induced breakdown spectra: a comparison of plasma conditions in view of efficient sorting
Sophie Barbier et al.
SPECTROCHIMICA ACTA PART B-ATOMIC SPECTROSCOPY (2013)
An analysis of the composition and metal contamination of plastics from waste electrical and electronic equipment (WEEE)
Erik Stenvall et al.
WASTE MANAGEMENT (2013)
Composition of plastics from waste electrical and electronic equipment (WEEE) by direct sampling
Graca Martinho et al.
WASTE MANAGEMENT (2012)
Effect of Heterophasic or Random PP Copolymer on the Compatibility Mechanism between EVA and PP Copolymers
Eduardo Ramirez-Vargas et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2009)
E-waste: An assessment of global production and environmental impacts
Brett H. Robinson
SCIENCE OF THE TOTAL ENVIRONMENT (2009)
Quality concepts for the improved use of recycled polymeric materials: A review
Francisco Vilaplana et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2008)
Determination of different morphological structures in PC/ABS open spiral injection moldings
N. O-Charoen et al.
POLYMER ENGINEERING AND SCIENCE (2008)
Effects of compatibilizer on mechanical, morphological, and rheological properties of polypropylene/poly(acrylonitrile-butadiene-styrene) blends
Chong K. Kum et al.
MACROMOLECULAR RESEARCH (2007)
Characterisation of polymer fractions from waste electrical and electronic equipment (WEEE) and implications for waste management
Martin Schlummer et al.
CHEMOSPHERE (2007)
Injection molding-induced morphology of thermoplastic polymer blends
GJ Zhong et al.
POLYMER ENGINEERING AND SCIENCE (2005)
Anisotropic micro structure-impact fracture behavior relationship of polycarbonate/polyethylene blends injection-molded at different temperatures
ZM Li et al.
POLYMER (2005)
Morphology-tensile behavior relationship in injection molded poly(ethylene terephthalate)/polyethylene and polycarbonate/polyethylene blends (I) - Part I - Skin-core structure
ZM Li et al.
JOURNAL OF MATERIALS SCIENCE (2004)
Morphology-tensile behavior relationship in injection molded poly(ethylene terephthalate)/polyethylene and polycarbonate/polyethylene blends (II) - Part II - Tensile behavior
ZM Li et al.
JOURNAL OF MATERIALS SCIENCE (2004)
Compatibilization of polymer blends
LA Utracki
CANADIAN JOURNAL OF CHEMICAL ENGINEERING (2002)
Recycling of acrylonitrile-butadiene-styrene and high-impact polystyrene from waste computer equipment
LB Brennan et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2002)
Influence of some test parameters on specimen loading determination methods in instrumented Charpy impact tests
P Landrein et al.
ENGINEERING FRACTURE MECHANICS (2001)