Related references
Note: Only part of the references are listed.Effect of hydrolysis time on the morphological, physical, chemical, and thermal behavior of sugar palm nanocrystalline cellulose (Arenga pinnata (Wurmb.) Merr)
R. A. Ilyas et al.
TEXTILE RESEARCH JOURNAL (2021)
Internally stiffened foam-filled carbon fiber reinforced composite tubes under impact loading for energy absorption applications
Tamer A. Sebaey et al.
COMPOSITE STRUCTURES (2021)
An efficient model for laminated composite thin-walled beams of open or closed cross-section and with or without in-filled materials
Azizul Islam et al.
COMPOSITE STRUCTURES (2021)
Low-velocity impact response of tube-reinforced honeycomb sandwich structure
Yunwei Zhang et al.
THIN-WALLED STRUCTURES (2021)
Micro- and Nanocellulose in Polymer Composite Materials: A Review
Abdoulhdi A. Borhana Omran et al.
POLYMERS (2021)
Dynamic mechanical behaviour of kenaf cellulosic fibre biocomposites: a comprehensive review on chemical treatments
M. R. M. Asyraf et al.
CELLULOSE (2021)
Comparison of Static and Long-term Creep Behaviors between Balau Wood and Glass Fiber Reinforced Polymer Composite for Cross-arm Application
M. R. M. Asyraf et al.
FIBERS AND POLYMERS (2021)
Utilization of Bracing Arms as Additional Reinforcement in Pultruded Glass Fiber-Reinforced Polymer Composite Cross-Arms: Creep Experimental and Numerical Analyses
Muhammad Rizal Muhammad Asyraf et al.
POLYMERS (2021)
Potential of Natural Fiber Reinforced Polymer Composites in Sandwich Structures: A Review on Its Mechanical Properties
S. Alsubari et al.
POLYMERS (2021)
Influence of Additional Bracing Arms as Reinforcement Members in Wooden Timber Cross-Arms on Their Long-Term Creep Responses and Properties
Muhammad Rizal Muhammad- Asyraf et al.
APPLIED SCIENCES-BASEL (2021)
Residual compressive load-carrying capacity of cross-laminated timber walls after exposed to one-side fire
Yu Bai et al.
JOURNAL OF BUILDING ENGINEERING (2021)
Flexural behaviour of pultruded GFRP beams infilled with HVFA ECC
C. Yoganantham et al.
MATERIALS TODAY-PROCEEDINGS (2021)
Environmental benign natural fibre reinforced thermoplastic composites: A review
Habib Awais et al.
COMPOSITES PART C: OPEN ACCESS (2021)
Sugar palm (Arenga pinnata [Wurmb.] Merr) starch films containing sugar palm nanofibrillated cellulose as reinforcement: Water barrier properties
R. A. Ilyas et al.
POLYMER COMPOSITES (2020)
Investigating the feasibility of a new testing method for GFRP/polymer foam sandwich composites used in railway passenger vehicles
Asim Onder et al.
COMPOSITE STRUCTURES (2020)
Effects of UV radiation, moisture and elevated temperature on mechanical properties of GFRP pultruded profiles
Milad Bazli et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Development of a new outer sleeve assembly for beam-column connections
Lilin Cao et al.
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2020)
Failure study of honeycomb sandwich structure with embedded part under axial pullout loading
Ruixiang Bai et al.
THIN-WALLED STRUCTURES (2020)
Response of foam concrete-filled aluminum honeycombs subject to quasi-static and dynamic compression
Hongyuan Zhou et al.
COMPOSITE STRUCTURES (2020)
Fire safety of composites in prefabricated buildings: From fibre reinforced polymer to textile reinforced concrete
Kate T. Q. Nguyen et al.
COMPOSITES PART B-ENGINEERING (2020)
Conceptual design of multi-operation outdoor flexural creep test rig using hybrid concurrent engineering approach
M. R. M. Asyraf et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Woods and composites cantilever beam: A comprehensive review of experimental and numerical creep methodologies
M. R. M. Asyraf et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
A comprehensive review on mechanical properties of pultruded FRP composites subjected to long-term environmental effects
TianQiao Liu et al.
COMPOSITES PART B-ENGINEERING (2020)
Power transmission line inspection robots: A review, trends and challenges for future research
Ahmad Bala Alhassan et al.
INTERNATIONAL JOURNAL OF ELECTRICAL POWER & ENERGY SYSTEMS (2020)
Conceptual design of the cross-arm for the application in the transmission towers by using TRIZ-morphological chart-ANP methods
Hussein Kadhim Sharaf et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Predicting Flange Local Buckling Capacity of Pultruded GFRP I-Sections Subject to Flexure
Tianqiao Liu et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2020)
An overview of the formation of fibre waviness and its effect on the mechanical performance of fibre reinforced polymer composites
Pritam Kulkarni et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)
An accurate approach for the evaluation of the performance of overhead distribution lines due to indirect lightning
Amedeo Andreotti et al.
ELECTRIC POWER SYSTEMS RESEARCH (2020)
Advanced polymeric composites via commingling for critical engineering applications
Nayana V et al.
POLYMER TESTING (2020)
A review on plant fiber reinforced thermoset polymers for structural and frictional composites
Vijay Chaudhary et al.
POLYMER TESTING (2020)
Experimental study on seismic response of precast bridge piers with double-grouted sleeve connections
Yang Liu et al.
ENGINEERING STRUCTURES (2020)
Flexural and shear characteristics of bio-based sandwich beams made of hollow and foam-filled paper honeycomb cores and flax fiber composite skins
Yuchen Fu et al.
THIN-WALLED STRUCTURES (2020)
Bending characteristics of all-composite hexagon honeycomb sandwich beams: experimental tests and a three-dimensional failure mechanism map
Xingyu Wei et al.
MECHANICS OF MATERIALS (2020)
Potential Application of Green Composites for Cross Arm Component in Transmission Tower: A Brief Review
M. R. M. Asyraf et al.
INTERNATIONAL JOURNAL OF POLYMER SCIENCE (2020)
Experimental investigation of the three-point bending properties of sandwich beams with polyurethane foam-filled lattice cores
Hossein Taghipoor et al.
STRUCTURES (2020)
Influence of CaCO3 in pultruded glass fiber/unsaturated polyester resin composite on flexural creep behavior using conventional and time-temperature superposition principle methods
A. N. Johari et al.
POLIMERY (2020)
Creep behaviour monitoring of short-term duration for fiber-glass reinforced coma-site cross-arms with unsaturated polyester resin samples using conventional analysis
A. N. Johari et al.
JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES (2020)
Creep test rig for cantilever beam: Fundamentals, prospects and present views
M. R. M. Asyraf et al.
JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES (2020)
Development and characterization of alkali treated abaca fiber reinforced friction composites
Yucheng Liu et al.
COMPOSITE INTERFACES (2019)
Dynamics analysis of functionally graded porous (FGP) circular, annular and sector plates with general elastic restraints
Jing Zhao et al.
COMPOSITES PART B-ENGINEERING (2019)
Colloidal stability of water-based carbon nanotube suspensions in electrophoretic deposition process: Effect of applied voltage and deposition time
J. Ervina et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Improvement of mechanical properties of hybrid composites through interply rearrangement of glass and carbon woven fabrics for marine application
Dipak Kumar Jesthi et al.
COMPOSITES PART B-ENGINEERING (2019)
Fast processing and continuous simulation of automotive structural composite components
Frank Henning et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2019)
Mechanical behavior and damage monitoring of pultruded wood-cored GFRP sandwich components
Lingfeng Zhang et al.
COMPOSITE STRUCTURES (2019)
Effect of basalt fibers on the flexural behavior of concrete beams reinforced with BFRP bars
Farid Abed et al.
COMPOSITE STRUCTURES (2019)
Multifunctional application of carbon fiber reinforced polymer composites: Electrical properties of the reinforcing carbon fibers - A short review
N. Forintos et al.
COMPOSITES PART B-ENGINEERING (2019)
A viscoelastic model for time-dependent behavior of pultruded GFRP
Daniel Carlos Taissum Cardoso et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
The wear resistance improvement of fibre reinforced polymer composite gears
Ken Mao et al.
WEAR (2019)
Telescopic Hydraulic Cylinder Made of Composite Material
Luigi Solazzi et al.
APPLIED COMPOSITE MATERIALS (2019)
Strengthening of reinforced concrete structure using sprayable fiber-reinforced cementitious composites with high ductility
Bo-Tao Huang et al.
COMPOSITE STRUCTURES (2019)
Recent advances in novel metallic honeycomb structure
Zhonggang Wang
COMPOSITES PART B-ENGINEERING (2019)
Strengthening concrete using phosphate cement-based fiber-reinforced inorganic composites for improved fire resistance
Zhu Ding et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Effect of energy-absorbing materials on the mechanical behaviour of hybrid FRP honeycomb core sandwich composites
A Florence et al.
MATERIALS RESEARCH INNOVATIONS (2019)
Flexural creep behavior and life prediction of GFRP-balsa sandwich beams
Xiaolong Li et al.
COMPOSITE STRUCTURES (2019)
Creep failure of honeycombs made by rapid prototyping
P. E. Seiler et al.
ACTA MATERIALIA (2019)
Confusion about infusion: An overview of infusion processes
Arne Hindersmann
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
A review of coir fiber reinforced polymer composites
Adewale George Adeniyi et al.
COMPOSITES PART B-ENGINEERING (2019)
Manufacturing and characterization of sustainable hybrid composites using sisal and hemp fibres as reinforcement of poly (lactic acid) via injection moulding
Asokan Pappu et al.
INDUSTRIAL CROPS AND PRODUCTS (2019)
Fiber-Reinforced Polymer Composites: Manufacturing, Properties, and Applications
Dipen Kumar Rajak et al.
POLYMERS (2019)
On the Design and Simulation of Hybrid Metal-Composite Gears
Piervincenzo G. Catera et al.
APPLIED COMPOSITE MATERIALS (2019)
Conceptual design of creep testing rig for full-scale cross arm using TRIZ-Morphological chart-analytic network process technique
M. R. M. Asyraf et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)
An overview of burst, buckling, durability and corrosion analysis of lightweight FRP composite pipes and their applicability
M. Manoj Prabhakar et al.
COMPOSITE STRUCTURES (2019)
FUNDAMENTALS OF CREEP, TESTING METHODS AND DEVELOPMENT OF TEST RIG FOR THE FULL-SCALE CROSSARM: A REVIEW
M. R. M. Asyraf et al.
JURNAL TEKNOLOGI-SCIENCES & ENGINEERING (2019)
Design and manufacturing of wood filled steel tubes for structural applications
Bharatesh Adappa Danawade et al.
MATERIALS TODAY-PROCEEDINGS (2019)
Mechanical and vibration response of insulated hybrid composites
Somen K. Bhudolia et al.
JOURNAL OF INDUSTRIAL TEXTILES (2018)
The Temperature Effect on the Compressive Behavior of Closed-Cell Aluminum-Alloy Foams
Nima Movahedi et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2018)
Numerical and experimental analysis of the vibroacoustic behavior of an electric window-lift gear motor
Emmanuel Rigaud et al.
ARCHIVE OF APPLIED MECHANICS (2018)
A review on the application of sprayed-FRP composites for strengthening of concrete and masonry structures in the construction sector
Anant Parghi et al.
COMPOSITE STRUCTURES (2018)
Numerical modelling of partially potted inserts in honeycomb sandwich panels under pull-out loading
Ralf Seemann et al.
COMPOSITE STRUCTURES (2018)
Mechanical performance of honeycomb filled with circular CFRP tubes
Zhonggang Wang et al.
COMPOSITES PART B-ENGINEERING (2018)
Mechanical properties of pultruded GFRP WF, channel and angle profiles for Le limit state/permissible stress design
Geoffrey John Turvey et al.
COMPOSITES PART B-ENGINEERING (2018)
Experimental fatigue behavior of pultruded glass fibre reinforced polymer composite materials
Priscilla Rocha Vieira et al.
COMPOSITES PART B-ENGINEERING (2018)
Review of current trends in research and applications of sandwich structures
Victor Birman et al.
COMPOSITES PART B-ENGINEERING (2018)
Properties of a magnesium phosphate cement-based fire-retardant coating containing glass fiber or glass fiber powder
Yuan Fang et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Practical model for tower earthing systems in lightning simulations
F. Koehler et al.
ELECTRIC POWER SYSTEMS RESEARCH (2018)
The mechanical properties of expanded perlite-aluminium syntactic foam at elevated temperatures
Mehdi Taherishargh et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
A comparative study on empty and foam-filled hybrid material double-hat beams under lateral impact
Chang Qi et al.
THIN-WALLED STRUCTURES (2018)
Flexural behaviour of hardwood and softwood beams with mechanically connected GFRP plates
Marco Corradi et al.
COMPOSITE STRUCTURES (2018)
CAE method for compression molding of carbon fiber-reinforced thermoplastic composite using bulk materials
Yuyang Song et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
On dynamic response of corrugated sandwich beams with metal foam-filled folded plate core subjected to low-velocity impact
Qinghua Qin et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Dynamic bending responses of CFRP thin-walled square beams filled with aluminum honeycomb
Yong Xiao et al.
THIN-WALLED STRUCTURES (2018)
Investigation of Mechanical and Tribological Behavior of Composite Material Filled with Black Epoxy Resin and Aluminium Tri-Hydroxide Using Reinforcement of Glass Fiber
Pratiksha Hiralal Wagh et al.
PROCEEDINGS OF THE 1ST INTERNATIONAL CONFERENCE ON MECHANICAL AND MATERIALS SCIENCE ENGINEERING: INNOVATION AND RESEARCH-2018 (ICMMSE:IR 2018) (2018)
Investigation of mechanical behavior of woven/knitted hybrid composites
Waqas Ashraf et al.
JOURNAL OF THE TEXTILE INSTITUTE (2017)
Targeted pre-treatment of hemp bast fibres for optimal performance in biocomposite materials: A review
Ming Liu et al.
INDUSTRIAL CROPS AND PRODUCTS (2017)
A review of biocompatible metal injection moulding process parameters for biomedical applications
M. F. F. A. Hamidi et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
Energy absorption characteristics of bio-inspired honeycomb structure under axial impact loading
Jinwu Xiang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Crushing response of square aluminium tubes filled with polyurethane foam and aluminium honeycomb
Rafea Dakhil Hussein et al.
THIN-WALLED STRUCTURES (2017)
A molecular dynamics simulation study on enhancement of mechanical and tribological properties of polymer composites by introduction of graphene
Yunlong Li et al.
CARBON (2017)
Bending performance of GFRP-wood sandwich beams with lattice-web reinforcement in flatwise and sidewise directions
Youjun Qi et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Effect of beam orientation on the static behaviour of phenolic core sandwich composites with different shear span-to-depth ratios
Wahid Ferdous et al.
COMPOSITE STRUCTURES (2017)
Mechanical behavior of composited structure filled with tandem honeycombs
Zhonggang Wang et al.
COMPOSITES PART B-ENGINEERING (2017)
Failure mode maps of natural and synthetic fiber reinforced composite sandwich panels
Juan Pablo Vitale et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
Recent advances in hybrid lattice-cored sandwiches for enhanced multifunctional performance
Bin Han et al.
EXTREME MECHANICS LETTERS (2017)
Axial crushing behaviour of honeycomb-filled square carbon fibre reinforced plastic (CFRP) tubes
Rafea Dakhil Hussein et al.
COMPOSITE STRUCTURES (2016)
Dynamic behaviour of auxetic gradient composite hexagonal honeycombs
L. Boldrin et al.
COMPOSITE STRUCTURES (2016)
Hybridization effects on quasi-static penetration resistance in fiber reinforced hybrid composite laminates
Mehmet Bulut et al.
COMPOSITES PART B-ENGINEERING (2016)
Design and manufacturing of automobile hood using natural composite structure
Changduk Kong et al.
COMPOSITES PART B-ENGINEERING (2016)
Effect of service temperature on the shear creep response of rigid polyurethane foam used in composite sandwich floor panels
Mario Garrido et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
The effect of wide band modeling of tower-footing grounding system on the lightning performance of transmission lines: A probabilistic evaluation
Reza Shariatinasab et al.
ELECTRIC POWER SYSTEMS RESEARCH (2016)
On design of graded honeycomb filler and tubal wall thickness for multiple load cases
Guohua Zhu et al.
THIN-WALLED STRUCTURES (2016)
Laminate Design of Lightweight Glass Fiber Reinforced Epoxy Composite for Electrical Transmission Structure
Haslan Fadli Ahmad Marzuki et al.
5TH INTERNATIONAL CONFERENCE ON RECENT ADVANCES IN MATERIALS, MINERALS AND ENVIRONMENT (RAMM) & 2ND INTERNATIONAL POSTGRADUATE CONFERENCE ON MATERIALS, MINERAL AND POLYMER (MAMIP) (2016)
The effect of hybridization on the ballistic impact behavior of hybrid composite armors
Aswani Kumar Bandaru et al.
COMPOSITES PART B-ENGINEERING (2015)
Advanced Spray Multiple Layup Process for Quality Control of Sprayed FRP Composites Used to Retrofit Concrete Structures
S. K. Ha et al.
JOURNAL OF CONSTRUCTION ENGINEERING AND MANAGEMENT (2015)
Bioinspired engineering of honeycomb structure - Using nature to inspire human innovation
Qiancheng Zhang et al.
PROGRESS IN MATERIALS SCIENCE (2015)
Effect of low doses beta irradiation on micromechanical properties of surface layer of injection molded polypropylene composite
David Manas et al.
RADIATION PHYSICS AND CHEMISTRY (2015)
Advanced Spray Multiple Layup Process for Quality Control of Sprayed FRP Composites Used to Retrofit Concrete Structures
S. K. Ha et al.
JOURNAL OF CONSTRUCTION ENGINEERING AND MANAGEMENT (2015)
Studying effects of preshearing on hand layup
Michael Elkington et al.
ADVANCED MANUFACTURING-POLYMER & COMPOSITES SCIENCE (2015)
Fibre hybridisation in polymer composites: A review
Yentl Swolfs et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)
Compressive strength equation for GFRP square tube columns
Daniel C. T. Cardoso et al.
COMPOSITES PART B-ENGINEERING (2014)
Axial crushing of circular multi-cell columns
Xiong Zhang et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2014)
An integrated recycling approach for GFRP pultrusion wastes: recycling and reuse assessment into new composite materials using Fuzzy Boolean Nets
Ana C. Meira Castro et al.
JOURNAL OF CLEANER PRODUCTION (2014)
Optimal economic planning of power transmission lines: A review
T. S. Kishore et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2014)
Hybrid Composite Laminates Reinforced with Kevlar/Carbon/Glass Woven Fabrics for Ballistic Impact Testing
Elias Randjbaran et al.
SCIENTIFIC WORLD JOURNAL (2014)
Pedestrian safety investigation of the new inner structure of the hood to mitigate the impact injury of the head
Mohammad Hassan Shojaeefard et al.
THIN-WALLED STRUCTURES (2014)
Flexural strength and energy absorption of carbon-fiber-aluminum-honeycomb composite sandwich reinforced by aluminum grid
Shanshan Shi et al.
THIN-WALLED STRUCTURES (2014)
Mechanical properties and production quality of hand-layup and vacuum infusion processed hybrid composite materials for GFRP marine structures
Sang-Young Kim et al.
INTERNATIONAL JOURNAL OF NAVAL ARCHITECTURE AND OCEAN ENGINEERING (2014)
Analysis and experimental testing of a built-up composite cross arm in a transmission line tower for mechanical performance
Munusamy Selvaraj et al.
COMPOSITE STRUCTURES (2013)
Low-velocity impact response of fully clamped metal foam core sandwich beam incorporating local denting effect
Qinghua Qin et al.
COMPOSITE STRUCTURES (2013)
Use of geopolymers for composite external reinforcement of RC members
Costantino Menna et al.
COMPOSITES PART B-ENGINEERING (2013)
Green composites: A review of adequate materials for automotive applications
Georgios Koronis et al.
COMPOSITES PART B-ENGINEERING (2013)
Energy absorption of multi-cell stub columns under axial compression
Xiong Zhang et al.
THIN-WALLED STRUCTURES (2013)
Critical factors on manufacturing processes of natural fibre composites
Mei-po Ho et al.
COMPOSITES PART B-ENGINEERING (2012)
Prediction of the mean folding force during the axial compression in foam-filled grooved tubes by theoretical analysis
Abbas Niknejad et al.
MATERIALS & DESIGN (2012)
A review on existing and future energy sources for electrical power generation in Malaysia
Rosnazri Ali et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2012)
Green composites: A brief review
F. P. La Mantia et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)
Crushing analysis and multiobjective crashworthiness optimization of honeycomb-filled single and bitubular polygonal tubes
Hanfeng Yin et al.
MATERIALS & DESIGN (2011)
A study on the static and dynamic loading of the foam filled metal hexagonal honeycomb - Theoretical and experimental
M. Zarei Mahmoudabadi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
A review of the present and future utilisation of FRP composites in the civil infrastructure with reference to their important in-service properties
L. C. Hollaway
CONSTRUCTION AND BUILDING MATERIALS (2010)
On the crashworthiness of composite rectangular thin-walled tubes internally reinforced with aluminium or polymeric foams: Experimental and numerical simulation
A. G. Mamalis et al.
COMPOSITE STRUCTURES (2009)
The effect of hybridization on the GFRP behavior under high velocity impact
R. J. Muhi et al.
COMPOSITES PART B-ENGINEERING (2009)
Full field monitoring of the resin flow and laminate properties during the resin infusion process
Q. Govignon et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)
Fabrication of metal matrix composites by metal injection molding - A review
Hezhou Ye et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
Optimum honeycomb filled crash absorber design
Hamidreza Zarei et al.
MATERIALS & DESIGN (2008)
Quasi-static axial compression behavior of constraint hexagonal and square-packed empty and aluminum foam-filled aluminum multi-tubes
M. Gueden et al.
THIN-WALLED STRUCTURES (2006)
Predicting energy absorption in a foam-filled thin-walled aluminum tube based on experimentally determined strengthening coefficient
H Kavi et al.
MATERIALS & DESIGN (2006)
A study on failure of cross arms in transmission line towers during prototype testing
NP Rao et al.
INTERNATIONAL JOURNAL OF STRUCTURAL STABILITY AND DYNAMICS (2005)
Vacuum injection moulding for large structural applications
WD Brouwer et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2003)
Dynamic axial crushing of multi-layer honeycomb panels and impact tensile behavior of the component members
Y Yasui
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2000)