Related references
Note: Only part of the references are listed.Enhancement of 3D-Printable Materials by Dual-Curing Procedures
Xavier Fernandez-Francos et al.
MATERIALS (2021)
Effect of pyrolysis on microstructures made of various photoresists by two-photon polymerization: comparative study
M. I. Sharipova et al.
OPTICAL MATERIALS EXPRESS (2021)
Polymerization mechanisms initiated by spatio-temporally confined light
Edvinas Skliutas et al.
NANOPHOTONICS (2021)
Recyclable thermosetting polymers for digital light processing 3D printing
Zhiqiang Chen et al.
MATERIALS & DESIGN (2021)
Influence of photoinitiator and temperature on photocross-linking kinetics of acrylated epoxidized soybean oil and properties of the resulting polymers
Migle Lebedevaite et al.
INDUSTRIAL CROPS AND PRODUCTS (2021)
Influence of Vanillin Acrylate-Based Resin Composition on Resin Photocuring Kinetics and Antimicrobial Properties of the Resulting Polymers
Aukse Navaruckiene et al.
MATERIALS (2021)
Vanillin-based thiol-ene systems as photoresins for optical 3D printing
Aukse Navaruckiene et al.
RAPID PROTOTYPING JOURNAL (2020)
Novel Bio-Based Epoxy Thermosets Based on Triglycidyl Phloroglucinol Prepared by Thiol-Epoxy Reaction
Dailyn Guzman et al.
POLYMERS (2020)
The Use of Click-Type Reactions in the Preparation of Thermosets
Osman Konuray et al.
POLYMERS (2020)
Laser Direct Writing of Arbitrary Complex Polymer Microstructures by Nitroxide-Mediated Photopolymerization
Siham Telitel et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Thermal post-curing as an efficient strategy to eliminate process parameter sensitivity in the mechanical properties of two-photon polymerized materials
Jens Bauer et al.
OPTICS EXPRESS (2020)
A Bio-Based Resin for a Multi-Scale Optical 3D Printing
Edvinas Skliutas et al.
SCIENTIFIC REPORTS (2020)
Dual-curable stereolithography resins for superior thermomechanical properties
O. Konuray et al.
EXPRESS POLYMER LETTERS (2020)
A fully biomass based monomer from itaconic acid and eugenol to build degradable thermosets via thiol-ene click chemistry
Yazhou Tian et al.
GREEN CHEMISTRY (2020)
Novel biobased epoxy resin thermosets derived from eugenol and vanillin
Hao Jiang et al.
POLYMER DEGRADATION AND STABILITY (2019)
Fully renewable thermosets based on bis-eugenol prepared by thiol-click chemistry
Dailyn Guzman et al.
REACTIVE & FUNCTIONAL POLYMERS (2019)
Polymer-Based Device Fabrication and Applications Using Direct Laser Writing Technology
Zhen-Lin Wu et al.
POLYMERS (2019)
Natural monomers: A mine for functional and sustainable materials - Occurrence, chemical modification and polymerization
George John et al.
PROGRESS IN POLYMER SCIENCE (2019)
Isosorbide Diallyl Based Antibacterial Thiol-Ene Photocured Coatings Containing Polymerizable Fluorous Quaternary Phosphonium Salt
Emrah Cakmakci et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)
Biobased thiol-epoxy shape memory networks from gallic acid and vegetable oils
Yechang Feng et al.
EUROPEAN POLYMER JOURNAL (2019)
Photoresins based on acrylated epoxidized soybean oil and benzenedithiols for optical 3D printing
Greta Miezinyte et al.
RAPID PROTOTYPING JOURNAL (2019)
Photoinitiator Free Resins Composed of Plant-Derived Monomers for the Optical μ-3D Printing of Thermosets
Migle Lebedevaite et al.
POLYMERS (2019)
Additive-manufacturing of 3D glass-ceramics down to nanoscale resolution
Darius Gailevicius et al.
NANOSCALE HORIZONS (2019)
Increasing the functionalities of 3D printed microchemical devices by single material, multimaterial, and print-pause-print 3D printing
Feng Li et al.
LAB ON A CHIP (2019)
Prenatal exposure to bisphenol A and hyperactivity in children: a systematic review and meta-analysis
Johanna R. Rochester et al.
ENVIRONMENT INTERNATIONAL (2018)
High-Speed 3D Printing of High-Performance Thermosetting Polymers via Two-Stage Curing
Xiao Kuang et al.
MACROMOLECULAR RAPID COMMUNICATIONS (2018)
Beyond 100 nm resolution in 3D laser lithography - Post processing solutions
G. Seniutinas et al.
MICROELECTRONIC ENGINEERING (2018)
Synthesis and characterization of petroleum and biobased epoxy resins: a review
Sudheer Kumar et al.
POLYMER INTERNATIONAL (2018)
Preparation of new biobased coatings from a triglycidyl eugenol derivative through thiol-epoxy click reaction
Dailyn Guzman et al.
PROGRESS IN ORGANIC COATINGS (2018)
State of the Art in Dual-Curing Acrylate Systems
Osman Konuray et al.
POLYMERS (2018)
Effect of Selected Thiols on Cross-Linking of Acrylated Epoxidized Soybean Oil and Properties of Resulting Polymers
Sigita Kasetaite et al.
POLYMERS (2018)
Enabling direct laser writing of cellulose-based submicron architectures
Maximilian Rothammer et al.
CELLULOSE (2018)
Sustainable Synthetic Approaches for the Preparation of Plant Oil-Based Thermosets
Audrey Llevot
JOURNAL OF THE AMERICAN OIL CHEMISTS SOCIETY (2017)
Fully biobased epoxy resin systems composed of a vanillin-derived epoxy resin and renewable phenolic hardeners
Mitsuhiro Shibata et al.
EUROPEAN POLYMER JOURNAL (2017)
New bio-based materials obtained by thiol-ene/thiol-epoxy dual curing click procedures from eugenol derivates
Dailyn Guzman et al.
EUROPEAN POLYMER JOURNAL (2017)
A multidisciplinary investigation of the technical and environmental performances of TAML/peroxide elimination of Bisphenol A compounds from water
Yusuf Onundi et al.
GREEN CHEMISTRY (2017)
Bio-Based Aromatic Epoxy Monomers for Thermoset Materials
Feifei Ng et al.
MOLECULES (2017)
Latent curing of epoxy-thiol thermosets
Ali Osman Konuray et al.
POLYMER (2017)
UV-thermal dual cured anti-bacterial thiol-ene networks with superior performance from renewable resources
Jinyue Dai et al.
POLYMER (2017)
Recent advances in vegetable oil-based polymers and their composites
Chaoqun Zhang et al.
PROGRESS IN POLYMER SCIENCE (2017)
Renewable Thiol-Ene Thermosets Based on Refined and Selectively Allylated Industrial Lignin
Marcus Jawerth et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2017)
Fracture toughness and ductile characteristics of diglycidyl ether of bisphenol-A resins modified with biodegradable epoxidized linseed oil
Yoon-Ji Yim et al.
COMPOSITES PART B-ENGINEERING (2017)
3D Laser Micro- and Nanoprinting: Challenges for Chemistry
Christopher Barner-Kowollik et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2017)
Facile one-step synthesis of bio-based AESO resins
Chengshuang Wang et al.
EUROPEAN JOURNAL OF LIPID SCIENCE AND TECHNOLOGY (2016)
Recent advances in bio-based epoxy resins and bio-based epoxy curing agents
Elyse A. Baroncini et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2016)
Sequential curing of off-stoichiometric thiol-epoxy thermosets with a custom-tailored structure
Xavier Fernandez-Francos et al.
POLYMER CHEMISTRY (2016)
Preparation of click thiol-ene/thiol-epoxy thermosets by controlled photo/thermal dual curing sequence
Dailyn Guzman et al.
RSC ADVANCES (2015)
Effect of the Network Structure and Programming Temperature on the Shape-Memory Response of Thiol-Epoxy Click Systems
Alberto Belmonte et al.
POLYMERS (2015)
Enhancement in the Glass Transition Temperature in Latent Thiol-Epoxy Click Cured Thermosets
Dailyn Guzman et al.
POLYMERS (2015)
Synthesis and Characterization of Bio-based Epoxy Blends from Renewable Resource Based Epoxidized Soybean Oil as Reactive Diluent
Sushanta K. Sahoo et al.
CHINESE JOURNAL OF POLYMER SCIENCE (2015)
Vegetable-oil-based polymers as future polymeric biomaterials
Shida Miao et al.
ACTA BIOMATERIALIA (2014)
Bisphenol A - Sources, toxicity and biotransformation
Jaromir Michalowicz
ENVIRONMENTAL TOXICOLOGY AND PHARMACOLOGY (2014)
Tara tannins as phenolic precursors of thermosetting epoxy resins
Chahinez Aouf et al.
EUROPEAN POLYMER JOURNAL (2014)
Functionalized green tea tannins as phenolic prepolymers for bio-based epoxy resins
Sofia Benyahya et al.
INDUSTRIAL CROPS AND PRODUCTS (2014)
Designing functionalizable hydrogels through thiol-epoxy coupling chemistry
Nergiz Cengiz et al.
CHEMICAL COMMUNICATIONS (2013)
Renewable resource-based epoxy resins derived from multifunctional poly(4-hydroxybenzoates)
Damien Fourcade et al.
GREEN CHEMISTRY (2013)
Concentrations and Profiles of Bisphenol A and Other Bisphenol Analogues in Foodstuffs from the United States and Their Implications for Human Exposure
Chunyang Liao et al.
JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY (2013)
Synthesis and Properties of Biobased Epoxy Resins. Part 1. Glycidylation of Flavonoids by Epichlorohydrin
Helene Nouailhas et al.
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2011)
Thiol-Ene Click Chemistry
Charles E. Hoyle et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2010)
Thiol-click chemistry: a multifaceted toolbox for small molecule and polymer synthesis
Charles E. Hoyle et al.
CHEMICAL SOCIETY REVIEWS (2010)
Vegetable oil-based polymeric materials: synthesis, properties, and applications
Ying Xia et al.
GREEN CHEMISTRY (2010)
Diffusion in polymers dependence on crosslink density
Vadim V. Krongauz
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2010)
Synthesis, Characterization and Cleavage of Surface-Bound Linear Polymers Formed Using Thiol-Ene Photopolymerizations
Vaibhav S. Khire et al.
MACROMOLECULES (2008)
Engineering stop gaps of inorganic-organic polymeric 3D woodpile photonic crystals with post-thermal treatment
Jiafang Li et al.
OPTICS EXPRESS (2008)
Thiol-norbornene materials:: Approaches to develop high Tg thiol-ene polymers
Jacquelyn A. Carioscia et al.
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2007)
Polymers from triglyceride oils
F. Seniha Guner et al.
PROGRESS IN POLYMER SCIENCE (2006)
Share Paper
