Related references
Note: Only part of the references are listed.Effects of the infill pattern on mechanical properties of fused layer modeling (FLM) 3D printed wood/polylactic acid (PLA) composites
S. Kain et al.
EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2020)
Adhesive bonding of 3D-printed plastic components
Heinrich Leicht et al.
JOURNAL OF ADHESION (2020)
Enhancement of strength of adhesive bond between wood and metal using atmospheric plasma treatment
Jure Zigon et al.
CELLULOSE (2020)
Implementing FDM 3D Printing Strategies Using Natural Fibers to Produce Biomass Composite
Waleed Ahmed et al.
MATERIALS (2020)
Surface Activation of Polylactic Acid-Based Wood-Plastic Composite by Atmospheric Pressure Plasma Treatment
Philipp Sauerbier et al.
MATERIALS (2020)
Material Extrusion Additive Manufacturing of Wood and Lignocellulosic Filled Composites
Meghan E. Lamm et al.
POLYMERS (2020)
Microstructure and mechanical properties of three dimensional-printed continuous fiber composites
Cagri Oztan et al.
JOURNAL OF COMPOSITE MATERIALS (2019)
FDM 3D Printing of Polymers Containing Natural Fillers: A Review of their Mechanical Properties
Valentina Mazzanti et al.
POLYMERS (2019)
Effect of wood flour content on surface properties of 3D printed materials produced from wood flour/PLA filament
Nadir Ayrilmis et al.
INTERNATIONAL JOURNAL OF POLYMER ANALYSIS AND CHARACTERIZATION (2019)
Effect of selected printing settings on viscoelastic behaviour of 3D printed polymers with and without wood
Manja Kitek Kuzman et al.
MATERIALS RESEARCH EXPRESS (2019)
Microstructure and Mechanical Performance of 3D Printed Wood-PLA/PHA Using Fused Deposition Modelling: Effect of Printing Temperature
Sofiane Guessasma et al.
POLYMERS (2019)
Investigation of the performance of a pilot-scale barrel atmospheric plasma system for plasma activation of polymer particles
Hisham M. Abourayana et al.
NANOTECHNOLOGY AND PRECISION ENGINEERING (2019)
Plasma surface-modification of cellulose nanocrystals: a green alternative towards mechanical reinforcement of ABS
Andres Alanis et al.
RSC ADVANCES (2019)
Surface Modification of 3D Printed PLA Objects by Fused Deposition Modeling: A Review
Eda Hazal Baran et al.
COLLOIDS AND INTERFACES (2019)
Enhancing the mechanical performance of additive manufactured polymer components using atmospheric plasma pre-treatments
Hisham Abourayana et al.
PLASMA PROCESSES AND POLYMERS (2018)
Enhanced Bonding via Additive Manufacturing-Enabled Surface Tailoring of 3D Printed Continuous-Fiber Composites
Edem Dugbenoo et al.
ADVANCED ENGINEERING MATERIALS (2018)
Surface Modification and Aging of Polyacrylonitrile Butadiene Styrene Polymer Induced by Treatment in RF Oxygen Plasma
Matej Holc et al.
IEEE TRANSACTIONS ON PLASMA SCIENCE (2018)
Environmentally Friendly Plasma Activation of Acrylonitrile-Butadiene-Styrene and Polydimethylsiloxane Surfaces to Improve Paint Adhesion
Miguel Angel Martinez et al.
COATINGS (2018)
Environmentally benign metallization of material extrusion technology 3D printed acrylonitrile butadiene styrene parts using physical vapor deposition
Justin White et al.
ADDITIVE MANUFACTURING (2018)
Adhesive bonding of 3D-printed ABS parts and wood
Mirko Kariz et al.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2017)
Effect of layer thickness and print orientation on strength of 3D printed and adhesively bonded single lap joints
Volkan Kovan et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2017)
Structure and mechanical behavior of Big Area Additive Manufacturing (BAAM) materials
Chad E. Duty et al.
RAPID PROTOTYPING JOURNAL (2017)
Effects of argon low temperature plasma on PLA film surface and aging behaviors
Joanna Izdebska-Podsiadly et al.
VACUUM (2017)
Template for 3D Printing a Low-Temperature Plasma Probe
Sandra Martinez-Jarquin et al.
ANALYTICAL CHEMISTRY (2016)
3D printing of wood fibre biocomposites: From mechanical to actuation functionality
A. Le Duigou et al.
MATERIALS & DESIGN (2016)
Comparison of some effects of modification of a polylactide surface layer by chemical, plasma, and laser methods
Krzysztof Moraczewski et al.
APPLIED SURFACE SCIENCE (2015)
Determination of Wettability of Wood and Its Significance in Wood Science and Technology: A Critical Review
Marko Petric et al.
REVIEWS OF ADHESION AND ADHESIVES (2015)
Surface modification of polylactic acid (PLA) by air atmospheric plasma treatment
A. Jorda-Vilaplana et al.
EUROPEAN POLYMER JOURNAL (2014)
Hydrophilic Stability of Plastic Surfaces Treated in Low- and Atmospheric-Pressure Radio-Frequency Plasmas
Ruey-Chang Hsiao et al.
IEEE TRANSACTIONS ON PLASMA SCIENCE (2014)
DC Operated Air Plasma Jet for Antimicrobial Copper Coatings on Temperature Labile Surfaces
Jana Kredl et al.
IEEE TRANSACTIONS ON PLASMA SCIENCE (2014)
Impact of hydrophobic plasma treatments on the barrier properties of poly(lactic acid) films
Nadine Tenn et al.
RSC ADVANCES (2014)
Plasma surface modification of polylactic acid to promote interaction with fibroblasts
Tinneke Jacobs et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2013)
Thermal, mechanical and tribological properties of polycarbonate/acrylonitrile-butadiene-styrene blends
Nay Win Khun et al.
JOURNAL OF POLYMER ENGINEERING (2013)
Surface Modification of Smooth Poly(L-lactic acid) Films for Gelatin Immobilization
Hai Li et al.
ACS APPLIED MATERIALS & INTERFACES (2012)
Adhesion phenomena in bonded joints
A. Baldan
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2012)
Effect of Ammonia Plasma Treatment on the Properties and Cytocompatibility of a Poly(L-Lactic Acid) Film Surface
Yanpeng Jiao et al.
JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION (2012)
Surface Modification of Biodegradable Poly(D,L-lactic acid) by Nitrogen and Nitrogen/Hydrogen Plasma for Improving Surface Hydrophilicity
Zhao Guowei et al.
PLASMA SCIENCE & TECHNOLOGY (2011)
Plasma modification of polylactic acid in a medium pressure DBD
N. De Geyter et al.
SURFACE & COATINGS TECHNOLOGY (2010)
Plasma surface treatments of poly(L-lactic acid) (PLLA) and poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV)
B. M. P. Ferreira et al.
MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS (2009)
Surface modifications of polycarbonate (PC) and acrylonitrile butadiene styrene (ABS) copolymer by treatment with atmospheric plasma
Juana Abenojar et al.
SURFACE & COATINGS TECHNOLOGY (2009)
Effects of thermal modification on the adhesion between spruce wood (Picea abies Karst.) and a thermoplastic polymer
J. Follrich et al.
HOLZ ALS ROH-UND WERKSTOFF (2006)
Immobilization of chitosan onto poly-L-lactic acid film surface by plasma graft polymerization to control the morphology of fibroblast and liver cells
Z Ding et al.
BIOMATERIALS (2004)
Wetting on hydrophobic rough surfaces: To be heterogeneous or not to be?
A Marmur
LANGMUIR (2003)
Cell adhesion on gaseous plasma modified poly-(L-lactide) surface under shear stress field
YQ Wan et al.
BIOMATERIALS (2003)
Enhanced cell affinity of poly (D,L-lactide) by combining plasma treatment with collagen anchorage
J Yang et al.
BIOMATERIALS (2002)
Effect of surface roughness on the strength of cleavage joints
M Shahid et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2002)
Improving cell affinity of poly(D,L-lactide) film modified by anhydrous ammonia plasma treatment
J Yang et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2002)
Dynamic wettability of different machined wood surfaces
M Stehr et al.
JOURNAL OF ADHESION (2001)