Related references
Note: Only part of the references are listed.Chromium in Environment, Its Toxic Effect from Chromite-Mining and Ferrochrome Industries, and Its Possible Bioremediation
Johan J. Coetzee et al.
EXPOSURE AND HEALTH (2020)
Re-epithelialization and immune cell behaviour in an ex vivo human skin model
Ana Rakita et al.
SCIENTIFIC REPORTS (2020)
Application of microalgae cultivated on pine bark for the treatment of municipal wastewater in cylindrical photobioreactors
Tomasz Garbowski et al.
WATER AND ENVIRONMENT JOURNAL (2020)
The use of a natural substrate for immobilization of microalgae cultivated in wastewater
Tomasz Garbowski et al.
SCIENTIFIC REPORTS (2020)
Electrochemical Polishing of Austenitic Stainless Steels
Edyta Lyczkowska-Widlak et al.
MATERIALS (2020)
Electropolishing of Stainless Steel in Laboratory and Industrial Scale
Pawel Lochynski et al.
METALS (2019)
Electrical energy consumption and mechanical properties of selective-laser-melting-produced 316L stainless steel samples using various processing parameters
Yi Zhu et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Comparison of electropolished 316L steel samples manufactured by SLM and traditional technology
Edyta Lyczkowska-Widlak et al.
RAPID PROTOTYPING JOURNAL (2019)
Selected Heavy Metals Removal From Electroplating Wastewater by Purified and Polyhydroxylbutyrate Functionalized Carbon Nanotubes Adsorbents
Mercy Temitope Bankole et al.
SCIENTIFIC REPORTS (2019)
Origin of nanoscale heterogeneity in the surface oxide film protecting stainless steel against corrosion
Li Ma et al.
NPJ MATERIALS DEGRADATION (2019)
Induction of pitting corrosion on stainless steel (grades 304 and 316) used in dairy industry by biofilms of common sporeformers
Somil Gupta et al.
INTERNATIONAL JOURNAL OF DAIRY TECHNOLOGY (2018)
Surface characterization of low-temperature grown yttrium oxide
Miroslaw Krawczyk et al.
APPLIED SURFACE SCIENCE (2018)
Emission characteristics and chemical components of size-segregated particulate matter in iron and steel industry
Jia Jia et al.
ATMOSPHERIC ENVIRONMENT (2018)
New insight on early oxidation stages of austenitic stainless steel from in situ XPS analysis on single-crystalline Fe-18Cr-13Ni
Li Ma et al.
CORROSION SCIENCE (2018)
Electrochemical Reduction of Industrial Baths Used for Electropolishing of Stainless Steel
Pawel Lochynski et al.
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2018)
Surface morphology and passive film composition after pickling and electropolishing
P. Lochynski et al.
SURFACE ENGINEERING (2017)
Non-linear regression model for wind turbine power curve
Mantas Marciukaitis et al.
RENEWABLE ENERGY (2017)
The effects effects of parametric changes in electropolishing process on surface properties of 316L stainless steel
Zia ur Rahman et al.
APPLIED SURFACE SCIENCE (2017)
Surface studies of praseodymium by electron spectroscopies
Miroslaw Krawczyk et al.
APPLIED SURFACE SCIENCE (2016)
Adsorptive removal of nickel(II) ions from aqueous environment: A review
Nirav P. Raval et al.
JOURNAL OF ENVIRONMENTAL MANAGEMENT (2016)
Regression Analysis in Analytical Chemistry. Determination and Validation of Linear and Quadratic Regression Dependencies
Rafai I. Rawski et al.
SOUTH AFRICAN JOURNAL OF CHEMISTRY-SUID-AFRIKAANSE TYDSKRIF VIR CHEMIE (2016)
Improvement of the stainless steel electropolishing process by organic additives
Pawel Lochynski et al.
POLISH JOURNAL OF CHEMICAL TECHNOLOGY (2016)
XPS depth profiling analysis of passive surface layers formed on austenitic AISI 304L and AISI 316L SS after high-current-density electropolishing
Krzysztof Rokosz et al.
SURFACE & COATINGS TECHNOLOGY (2015)
Electrochemistry: as cause and cure in water pollution-an overview
Subramanyan Vasudevan et al.
ENVIRONMENTAL CHEMISTRY LETTERS (2014)
Electrochemical and chemical methods for improving surface characteristics of 316L stainless steel for biomedical applications
Afrooz Latifi et al.
SURFACE & COATINGS TECHNOLOGY (2013)
The electrochemical behaviour of 2205 duplex stainless steel in alkaline solutions with different pH in the presence of chloride
H. Luo et al.
ELECTROCHIMICA ACTA (2012)
Electropolishing of AISI-304 stainless steel for protection against SRB biofilm
A. M. Awad et al.
SURFACE & COATINGS TECHNOLOGY (2012)
Case studies of stainless steel corrosion in indoor swimming pool environments
J. Fischer et al.
CORROSION ENGINEERING SCIENCE AND TECHNOLOGY (2011)
SIMS analysis of hydrogen content in near surface layers of AISI 316L SS after electrolytic polishing under different conditions
Tadeusz Hryniewicz et al.
SURFACE & COATINGS TECHNOLOGY (2011)
Passivity of 316L stainless steel in borate buffer solution studied by Mott-Schottky analysis, atomic absorption spectrometry and X-ray photoelectron spectroscopy
Zhicao Feng et al.
CORROSION SCIENCE (2010)
The passive behaviour of AISI 316 in alkaline media and the effect of pH: A combined electrochemical and analytical study
L. Freire et al.
ELECTROCHIMICA ACTA (2010)
Investigation of Stainless Steel Corrosion in Ultrahigh-Purity Water and Steam Systems by Surface Analytical Techniques
Xia Dong et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2010)
Analysis of XPS results of AISI 316L SS electropolished and magnetoelectropolished at varying conditions
T. Hryniewicz et al.
SURFACE & COATINGS TECHNOLOGY (2010)
Localized corrosion (pitting): A model of passivity breakdown including the role of the oxide layer nanostructure
P. Marcus et al.
CORROSION SCIENCE (2008)
A comparative study of the corrosion protective properties of chromium and chromium free passivation methods
Robert Berger et al.
SURFACE & COATINGS TECHNOLOGY (2007)
Assessing the environmental impact of metal production processes
T. E. Norgate et al.
JOURNAL OF CLEANER PRODUCTION (2007)
Development of an optimized electrochemical process for subsequent coating of 316 stainless steel for stent applications
M. Haidopoulos et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2006)
New interpretations of XPS spectra of nickel metal and oxides
Andrew P. Grosvenor et al.
SURFACE SCIENCE (2006)
Influence of N, Ar and Si ion implantation on the passive layer and corrosion behaviour of AISI 304 and 430 stainless steels
E Cano et al.
SURFACE & COATINGS TECHNOLOGY (2006)
Fibronectin adsorption on Fe-Cr alloy studied by XPS
A Galtayries et al.
SURFACE AND INTERFACE ANALYSIS (2006)
XPS investigations of electrochemically formed passive layers on Fe/Cr-alloys in 0.5 M H2SO4
P Keller et al.
CORROSION SCIENCE (2004)
Investigation of multiplet splitting of Fe 2p XPS spectra and bonding in iron compounds
AP Grosvenor et al.
SURFACE AND INTERFACE ANALYSIS (2004)
The effects of electropolishing (EP) process parameters on corrosion resistance of 316L stainless steel
SJ Lee et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)
Share Paper
