Related references
Note: Only part of the references are listed.Investigation of signal behaviors for sensor fusion with tool condition monitoring system in turning
Mustafa Kuntoglu et al.
MEASUREMENT (2021)
A Review of Indirect Tool Condition Monitoring Systems and Decision-Making Methods in Turning: Critical Analysis and Trends
Mustafa Kuntoglu et al.
SENSORS (2021)
The Effect of Ultrasonic Cleaning Upon Mechanical Properties of Metal Matrix Composites
Abdullah Aslan et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2021)
The effects of harsh aging environments on the properties of neat and MWCNT reinforced epoxy resins
Abdullah Aslan et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Tool wear and machinability investigations in dry turning of Cu/Mo-SiCp hybrid composites
Emine Sap et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)
Novel Muntingia Calabura bark fi ber reinforced green-epoxy composite: A sustainable and green material for cleaner production
A. Vinod et al.
JOURNAL OF CLEANER PRODUCTION (2021)
Tribological performance based machinability investigations in cryogenic cooling assisted turning of α-β titanium Alloy
Munish Kumar Gupta et al.
TRIBOLOGY INTERNATIONAL (2021)
Improving mechanical properties of nano-sized TiC particle reinforced AA7075 Al alloy composites produced by ball milling and hot pressing
Emin Salur et al.
MATERIALS TODAY COMMUNICATIONS (2021)
Microstructure and Mechanical Effects of Co-Ti Powder Particles on Cu Matrix Composites
Emine Sap
RUSSIAN JOURNAL OF NON-FERROUS METALS (2021)
INFLUENCE OF MOLYBDENUM DISULFIDE PARTICLE SIZE ON FRICTION AND WEAR CHARACTERISTICS OF NON-ASBESTOS-BASED COPPER-FREE BRAKE FRICTION COMPOSITES
R. Vijay et al.
SURFACE REVIEW AND LETTERS (2020)
The effect of vibration and cutting zone temperature on surface roughness and tool wear in eco-friendly MQL turning of AISI D2
Onur Ozbek et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Optimization and analysis of process parameters for flank wear, cutting forces and vibration in turning of AISI 5140: A comprehensive study
Abdullah Aslan
MEASUREMENT (2020)
Effects of Turning Parameters and Parametric Optimization of the Cutting Forces in Machining SiCp/Al 45 wt% Composite
Rashid Ali Laghari et al.
METALS (2020)
Optimization and Analysis of Surface Roughness, Flank Wear and 5 Different Sensorial Data via Tool Condition Monitoring System in Turning of AISI 5140
Mustafa Kuntoglu et al.
SENSORS (2020)
Modeling of Cutting Parameters and Tool Geometry for Multi-Criteria Optimization of Surface Roughness and Vibration via Response Surface Methodology in Turning of AISI 5140 Steel
Mustafa Kuntoglu et al.
MATERIALS (2020)
Low-Velocity Impact Behavior of Porous Metal Matrix Composites Produced by Recycling of Bronze and Iron Chips
Omer Sinan Sahin et al.
IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY-TRANSACTIONS OF MECHANICAL ENGINEERING (2019)
Effect of tool nose radius and tool wear on residual stresses distribution while turning in situ TiB2/7050 Al metal matrix composites
Kunyang Lin et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
The mechanical properties of composite materials recycled from waste metallic chips under different pressures
A. Aslan et al.
INTERNATIONAL JOURNAL OF ENVIRONMENTAL SCIENCE AND TECHNOLOGY (2019)
Multi-objective optimization and life cycle assessment of eco-friendly cryogenic N2 assisted turning of Ti-6Al-4V
Mozammel Mia et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Thermal Modeling of Tool Temperature Distribution during High Pressure Coolant Assisted Turning of Inconel 718
Doriana M. D'Addona et al.
MATERIALS (2019)
Modeling of machining parameters affecting flank wear and surface roughness in hot turning of Monel-400 using response surface methodology (RSM)
Asit Kumar Parida et al.
MEASUREMENT (2019)
Experimental study and analysis of machinability characteristics of metal matrix composites during drilling
Emin Salur et al.
COMPOSITES PART B-ENGINEERING (2019)
Enhanced machinability of SiC-reinforced metal-matrix composite with hybrid turning
Wei Bai et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Investigation of progressive tool wear for determining of optimized machining parameters in turning
Mustafa Kuntoglu et al.
MEASUREMENT (2019)
Sustainability assessment associated with surface roughness and power consumption characteristics in nanofluid MQL-assisted turning of AISI 1045 steel
Adel Taha Abbas et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Machinability analysis and application of response surface approach on CNC turning of LM6/SiCp composites
K. Balasubramanian et al.
MATERIALS AND MANUFACTURING PROCESSES (2019)
Wear and mechanical properties of Al6061/SiC/B4C hybrid composites produced with powder metallurgy
Karakoç Halil et al.
Journal of Materials Research and Technology-JMR&T (2019)
Optimization of Power Consumption Associated with Surface Roughness in Ultrasonic Assisted Turning of Nimonic-90 Using Hybrid Particle Swarm-Simplex Method
Navneet Khanna et al.
MATERIALS (2019)
Prediction model of tool wear volume in precision turning of ceramic particle reinforced aluminum matrix composites
H. Z. Liu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Hybrid cooling-lubrication strategies to improve surface topography and tool wear in sustainable turning of Al 7075-T6 alloy
Munish Kumar Gupta et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Multi-objective optimization of surface roughness, thrust force, and torque produced by novel drill geometries using Taguchi-based GRA
Guven Meral et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Influence of Different Grades of CBN Inserts on Cutting Force and Surface Roughness of AISI H13 Die Tool Steel during Hard Turning Operation
Pardeep Kumar et al.
MATERIALS (2019)
Performance enhancement of cryogenic machining and its effect on tool wear during turning of Al-Ticp composites
Sravan Kumar Josyula et al.
MACHINING SCIENCE AND TECHNOLOGY (2018)
Turning titanium metal matrix composites (Ti-MMCs) with carbide and CBN inserts
Seyed Ali Niknam et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Effect of Cr particulate reinforcements in different ratios on wear performance and mechanical properties of Cu matrix composites
Mahir Uzun et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2018)
Turning characteristics of in situ formed TiB2 ceramic particulate reinforced AA7075 aluminum matrix composites using polycrystalline diamond cutting tool
A. Pugazhenthi et al.
MEASUREMENT (2018)
Multi-objective optimization of chip-tool interaction parameters using Grey-Taguchi method in MQL-assisted turning
Mozammel Mia et al.
MEASUREMENT (2018)
Mechanical properties and microstructure of composites produced by recycling metal chips
Abdullah Aslan et al.
INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2018)
Modeling and Optimization of Tool Wear and Surface Roughness in Turning of Al/SiCp Using Response Surface Methodology
Rashid Ali Laghari et al.
3D RESEARCH (2018)
Parametric optimization of CNC turning process for hybrid metal matrix composite
M. Nataraj et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Investigation of the performance of the MQL, dry, and wet turning by response surface methodology (RSM) and artificial neural network (ANN)
Mourad Nouioua et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Study of surface roughness and cutting forces using ANN, RSM, and ANOVA in turning of Ti-6Al-4V under cryogenic jets applied at flank and rake faces of coated WC tool
Mozammel Mia et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Machinability characteristics, thermal and mechanical properties of Al-Mg2Si in-situ composite with bismuth
Mohsen Marani Barzani et al.
MEASUREMENT (2017)
Some studies on mechanical and machining characteristics of Al2219/n-B4C/MoS2 nano-hybrid metal matrix composites
N. G. Siddesh Kumar et al.
MEASUREMENT (2017)
Investigating the Machinability of Al-Si-Cu cast alloy containing bismuth and antimony using coated carbide insert
Mohsen Marani Barzani et al.
MEASUREMENT (2015)
Evaluation of cutting force and surface roughness in the dry turning of Al-Mg2Si in-situ metal matrix composite inoculated with bismuth using DOE approach
Abbas Razavykia et al.
MEASUREMENT (2015)
Study on surface roughness measurement for turning of Al 7075/10/SiCp and Al 7075 hybrid composites by using response surface methodology (RSM) and artificial neural networking (ANN)
Ravinder Kumar et al.
MEASUREMENT (2015)
Effect of reinforcement on the cutting forces while machining metal matrix compositese-An experimental approach
Ch. Shoba et al.
ENGINEERING SCIENCE AND TECHNOLOGY-AN INTERNATIONAL JOURNAL-JESTECH (2015)
Effect of machining parameters on cutting force and surface roughness of in situ Al-4.5%Cu/TiC metal matrix composites
Anand Kumar et al.
MEASUREMENT (2014)
Mechanical properties of hot pressed SiCp and B4Cp/Alumix 123 composites alloyed with minor Zr
Ceren Gode
COMPOSITES PART B-ENGINEERING (2013)
Grey-fuzzy algorithm to optimise machining parameters in drilling of hybrid metal matrix composites
T. Rajmohan et al.
COMPOSITES PART B-ENGINEERING (2013)
A review of flank wear prediction methods for tool condition monitoring in a turning process
A. Siddhpura et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Desirability function approach: A review and performance evaluation in adverse conditions
Nuno R. Costa et al.
CHEMOMETRICS AND INTELLIGENT LABORATORY SYSTEMS (2011)
Share Paper
