Related references
Note: Only part of the references are listed.Photobiomodulation Enhances the Healing of Postextraction Alveolar Sockets: A Randomized Clinical Trial With Histomorphometric Analysis and Immunohistochemistry
Antonio Scarano et al.
JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY (2021)
Intraoral repair of a chipped porcelain-zirconia restoration
Potira Dalques Meirelles et al.
JOURNAL OF ESTHETIC AND RESTORATIVE DENTISTRY (2020)
In vitro evaluation of fracture resistance and cyclic fatigue resistance of computer-aided design-on and hand-layered zirconia crowns following cementation on epoxy dies
Kiran Kumar Pandurangan et al.
JOURNAL OF INDIAN PROSTHODONTIC SOCIETY (2020)
Effect of different air-abrasion protocols on topography, surface wettability and adhesion of MDP monomer-based resin cement to zirconia
Vivian Massi Paschoalino et al.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2019)
The shear bond strength of repaired high-viscosity bulk-fill resin composites with different adhesive systems and resin composite types
Burcu Oglakci et al.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2019)
An investigation of atomic force microscopy, surface topography and adhesion of luting cements to zirconia: effect of silica coating, zirconia primer and laser
Bengisu Yildirim et al.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2019)
Repair bond strength of composite to Er,Cr:YSGG laser irradiated zirconia and porcelain surfaces
Emre Tokar et al.
BIOMEDICAL JOURNAL (2019)
New Method for Evaluating Surface Roughness Parameters Acquired by Laser Scanning
Leandro Tonietto et al.
SCIENTIFIC REPORTS (2019)
Influence of Primers and Additional Resin Layer on Zirconia Repair Bond Strength
Fereshteh Shafiei et al.
JOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY (2019)
Bond strength of CAD/CAM-manufactured composite resin and ceramic veneers to a zirconia framework
Fumiaki Kimura et al.
JOURNAL OF ORAL SCIENCE (2019)
Evaluation of shear bond strength of zirconia-based monolithic CAD-CAM materials to resin cement after different surface treatments
B. Altan et al.
NIGERIAN JOURNAL OF CLINICAL PRACTICE (2019)
Ten-year survival and chipping rates and clinical quality grading of zirconia-based fixed dental prostheses
Maren Teichmann et al.
CLINICAL ORAL INVESTIGATIONS (2018)
Crystallographic and morphological analysis of sandblasted highly translucent dental zirconia
Masanao Inokoshi et al.
DENTAL MATERIALS (2018)
Effects of laser treatments on surface roughness of zirconium oxide ceramics
Goknil Ergun Kunt et al.
BMC ORAL HEALTH (2018)
Effect of liners and primers on tensile bond strength between zirconia and resin-based luting agent
Eun-Hye Jo et al.
JOURNAL OF ADVANCED PROSTHODONTICS (2018)
The role of functional phosphoric acid ester monomers in the surface treatment of yttria-stabilized tetragonal zirconia polycrystals
Masami Arai et al.
DENTAL MATERIALS JOURNAL (2017)
Chairside CAD/CAM materials. Part 1: Measurement of elastic constants and microstructural characterization
Renan Belli et al.
DENTAL MATERIALS (2017)
Color stainability of CAD/CAM and nanocomposite resin materials
Ozlem Acar et al.
JOURNAL OF PROSTHETIC DENTISTRY (2016)
Low-temperature degradation of Y-TZP ceramics: A systematic review and meta-analysis
G. K. R. Pereira et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2016)
Effect of Different Surface Treatments on the Bond Strength of Lithium Disilicate Ceramic to the Zirconia Core
Tuba Yilmaz-Savas et al.
PHOTOMEDICINE AND LASER SURGERY (2016)
Digitally Oriented Materials: Focus on Lithium DisilicateCeramics
Fernando Zarone et al.
INTERNATIONAL JOURNAL OF DENTISTRY (2016)
A randomized controlled clinical trial of 3-unit posterior zirconia-ceramic fixed dental prostheses (FDP) with layered or pressed veneering ceramics: 3-year results
Nadja Naenni et al.
JOURNAL OF DENTISTRY (2015)
Effects of Multipurpose, Universal Adhesives on Resin Bonding to Zirconia Ceramic
J-H Kim et al.
OPERATIVE DENTISTRY (2015)
The Effect of Sandblasting and Different Primers on Shear Bond Strength Between Yttria-tetragonal Zirconia Polycrystal Ceramic and a Self-adhesive Resin Cement
Y-A Yi et al.
OPERATIVE DENTISTRY (2015)
Microtensile Bond Strength of Lithium Disilicate to Zirconia with the CAD-on Technique
James J. Renda et al.
JOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY (2015)
Aspects of bonding between resin luting cements and glass ceramic materials
Tian Tian et al.
DENTAL MATERIALS (2014)
INFLUENCE OF MULTIMODE UNIVERSAL ADHESIVES AND ZIRCONIA PRIMER APPLICATION TECHNIQUES ON ZIRCONIA REPAIR
Bruno Seabra et al.
JOURNAL OF PROSTHETIC DENTISTRY (2014)
CERAMIC MATERIALS FOR PORCELAIN VENEERS: PART II. EFFECT OF MATERIAL, SHADE, AND THICKNESS ON TRANSLUCENCY
Karine T. L. Barizon et al.
JOURNAL OF PROSTHETIC DENTISTRY (2014)
The Clinical Success Of All-Ceramic Restorations
Alvaro Della Bona et al.
JOURNAL OF THE AMERICAN DENTAL ASSOCIATION (2014)
Bond Strength of the Porcelain Repair System to All-Ceramic Copings and Porcelain
Sang J. Lee et al.
JOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY (2014)
Mechanical properties of zirconia after different surface treatments and repeated firings
Meryem Gulce Subasi et al.
JOURNAL OF ADVANCED PROSTHODONTICS (2014)
An in vitro evaluation of the zirconia surface treatment by mesoporous zirconia coating on its bonding to resin cement
Yanli Zhang et al.
BIO-MEDICAL MATERIALS AND ENGINEERING (2014)
The effect of a coupling medium on color and translucency of CAD-CAM ceramics
Audrea Dallazem Nogueira et al.
JOURNAL OF DENTISTRY (2013)
Durable bonding to mechanically and/or chemically pre-treated dental zirconia
Masanao Inokoshi et al.
JOURNAL OF DENTISTRY (2013)
Influence of different power outputs of intraoral Nd:YAG laser on shear bond strength of a resin cement to nickel-chromium dental alloy
Azam Sadat Madani et al.
LASERS IN MEDICAL SCIENCE (2013)
Bond strength of resin cement to zirconia ceramic with different surface treatments
Aslihan Usumez et al.
LASERS IN MEDICAL SCIENCE (2013)
Effect of various intraoral repair systems on the shear bond strength of composite resin to zirconia
In-Hae Han et al.
JOURNAL OF ADVANCED PROSTHODONTICS (2013)
Shear bond strengths of pressed and layered veneering ceramics to high-noble alloy and zirconia cores
Motoaki Ishibe et al.
JOURNAL OF PROSTHETIC DENTISTRY (2012)
FLEXURAL STRENGTH AND THE PROBABILITY OF FAILURE OF COLD ISOSTATIC PRESSED ZIRCONIA CORE CERAMICS
Eleni Siarampi et al.
JOURNAL OF PROSTHETIC DENTISTRY (2012)
EFFECTS OF DIFFERENT SURFACE TREATMENTS ON STAINABILITY OF CERAMICS
Pelin F. Karagoz Motro et al.
JOURNAL OF PROSTHETIC DENTISTRY (2012)
Evaluation of the topographical surface changes and roughness of zirconia after different surface treatments
Meryem Gulce Subasi et al.
LASERS IN MEDICAL SCIENCE (2012)
Effect of blasting pressure, abrasive particle size and grade on phase transformation and morphological change of dental zirconia surface
Lubica Hallmann et al.
SURFACE & COATINGS TECHNOLOGY (2012)
Influence of surface conditioning and cleaning methods on resin bonding to zirconia ceramic
Ahmed Attia et al.
DENTAL MATERIALS (2011)
Adhesion/cementation to zirconia and other non-silicate ceramics: Where are we now?
Jeffrey Y. Thompson et al.
DENTAL MATERIALS (2011)
Novel fabrication method for zirconia restorations: Bonding strength of machinable ceramic to zirconia with resin cements
Soichi Kuriyama et al.
DENTAL MATERIALS JOURNAL (2011)
LONG-TERM RESIN BONDING TO ZIRCONIA CERAMIC WITH A NEW UNIVERSAL PRIMER
Ahmed Attia et al.
JOURNAL OF PROSTHETIC DENTISTRY (2011)
Influence of occlusal geometry on ceramic crown fracture; role of cusp angle and fissure radius
Tanapon Sornsuwan et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2011)
Bond Strength of Resin Cement to Yttrium-Stabilized Tetragonal Zirconia Ceramic Treated with Air Abrasion, Silica Coating, and Laser Irradiation
Musa Samil Akyil et al.
PHOTOMEDICINE AND LASER SURGERY (2010)
Effect of testing methods on the bond strength of resin to zirconia-alumina ceramic: microtensile versus shear test
Luiz F. VALANDRO et al.
DENTAL MATERIALS JOURNAL (2009)
Influence of Surface Treatments on Surface Roughness, Phase Transformation, and Biaxial Flexural Strength of Y-TZP Ceramics
Secil Karakoca et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2009)
Evaluation of the Surface Roughness and Morphologic Features of Y-TZP Ceramics after Different Surface Treatments
Andrea N. Cavalcanti et al.
PHOTOMEDICINE AND LASER SURGERY (2009)
Effect of zirconia surface treatments on the shear strength of zirconia/veneering ceramic composites
Jens Fischer et al.
DENTAL MATERIALS JOURNAL (2008)
A systematic review of the survival and complication rates of all-ceramic and metal-ceramic reconstructions after an observation period of at least 3 years.: Part II:: fixed dental prostheses
Irena Sailer et al.
CLINICAL ORAL IMPLANTS RESEARCH (2007)
Evaluation of resin adhesion to zirconia ceramic using some organosilanes
Jukka P. Matinlinna et al.
DENTAL MATERIALS (2006)
Microtensile bond strength of different components of core veneered all-ceramic restorations - Part II: Zirconia veneering ceramics
Moustafa N. Aboushelib et al.
DENTAL MATERIALS (2006)
Effect of zirconium-oxide ceramic surface treatments on the bond strength to adhesive resin
Saadet Saglam Atsu et al.
JOURNAL OF PROSTHETIC DENTISTRY (2006)
Microtensile bond strength of a resin cement to glass infiltrated zirconia-reinforced ceramic:: The effect of surface conditioning
R Amaral et al.
DENTAL MATERIALS (2006)
The influence of surface modification techniques on the performance of a Y-TZP dental ceramic
AR Curtis et al.
JOURNAL OF DENTISTRY (2006)
Bond strength of composite luting cement to zirconia ceramic surfaces
T Derand et al.
DENTAL MATERIALS (2005)
Effect of sandblasting on the long-term performance of dental ceramics
Y Zhang et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2004)
Evaluation of alternative intra-oral repair techniques for fractured ceramic-fused-to-metal restorations
M Özcan
JOURNAL OF ORAL REHABILITATION (2003)
Effect of surface conditioning methods on the bond strength of luting cement to ceramics
M Ozcan et al.
DENTAL MATERIALS (2003)
Influence of cross-head speed on resin-dentin shear bond strength
AT Hara et al.
DENTAL MATERIALS (2001)