Related references
Note: Only part of the references are listed.Combined microwave assisted roasting and leaching to recover platinum group metals from spent automotive catalysts
Jeroen Spooren et al.
MINERALS ENGINEERING (2020)
Ultrasound-assisted nitric acid pretreatment for enhanced biorecovery of platinum group metals from spent automotive catalyst
Salman Karim et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Highly efficient recovery of platinum, palladium, and rhodium from spent automotive catalysts via iron melting collection
Yunji Ding et al.
RESOURCES CONSERVATION AND RECYCLING (2020)
Electrochemical Recycling of Platinum Group Metals from Spent Catalytic Converters
Cornelia Diac et al.
METALS (2020)
Second Life Application of Automotive Catalysts: Hydrodynamic Cavitation Recovery and Photo Water Splitting
Adrian Ciocanea et al.
METALS (2020)
The Use of Power Ultrasound for the Production of PEMFC and PEMWE Catalysts and Low-Pt Loading and High-Performing Electrodes
Bruno G. Pollet
CATALYSTS (2019)
Recovery of Platinum from Spent Petroleum Catalysts: Optimization Using Response Surface Methodology
Yunji Ding et al.
METALS (2019)
An Efficient Leaching of Palladium from Spent Catalysts through Oxidation with Fe(III)
Yunji Ding et al.
MATERIALS (2019)
Numerical Investigation of a High-Pressure Submerged Jet Using a Cavitation Model Considering Effects of Shear Stress
Yongfei Yang et al.
PROCESSES (2019)
Novel approach for recovery of palladium in spent catalyst from automobile by a capture technology of eutectic copper
Lingen Zhang et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Intensification of industrial wastewater treatment using hydrodynamic cavitation combined with advanced oxidation at operating capacity of 70 L
Saurabh M. Joshi et al.
ULTRASONICS SONOCHEMISTRY (2019)
Novel approaches based on hydrodynamic cavitation for treatment of wastewater containing potassium thiocyanate
Rajashree H. Jawale et al.
ULTRASONICS SONOCHEMISTRY (2019)
Life cycle impacts of three-way ceramic honeycomb catalytic converter in terms of disability adjusted life year
K. M. Nazmul Islam et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Modeling NOx Storage and Reduction for a Diesel Automotive Catalyst Based on Synthetic Gas Bench Experiments
Federico Millo et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2018)
Real life experimental determination of platinum group metals content in automotive catalytic converters
I. Yakoumis et al.
E-MRS FALL SYMPOSIUM I: SOLUTIONS FOR CRITICAL RAW MATERIALS UNDER EXTREME CONDITIONS (2018)
The relation between the high speed submerged cavitating jet behaviour and the cavitation erosion process
Ezddin Hutli et al.
INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2016)
Sono-electrochemical recovery of metal ions from their aqueous solutions
Bingfeng Dong et al.
JOURNAL OF HAZARDOUS MATERIALS (2016)
A biological cyanide production and accumulation system and the recovery of platinum-group metals from spent automotive catalysts by biogenic cyanide
Doyun Shin et al.
HYDROMETALLURGY (2015)
Optimization of the microwave roasting extraction of palladium and rhodium from spent automobile catalysts using response surface analysis
Anran Chen et al.
INTERNATIONAL JOURNAL OF MINERAL PROCESSING (2015)
Dissolution of Noble Metals during Oxygen Evolution in Acidic Media
Serhiy Cherevko et al.
CHEMCATCHEM (2014)
Redeposition of electrochemically dissolved platinum as nanoparticles on carbon
C. F. Norgaard et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2014)
Hybrid reactor based on combined cavitation and ozonation: From concept to practical reality
P. R. Gogate et al.
ULTRASONICS SONOCHEMISTRY (2014)
Cavitation of a submerged jet
Michael M. Wright et al.
EXPERIMENTS IN FLUIDS (2013)
Hydrometallurgical recovery/recycling of platinum by the leaching of spent catalysts: A review
Manis Kumar Jha et al.
HYDROMETALLURGY (2013)
Extraction and separation of platinum, palladium and rhodium using Cyanex 923 and their recovery from real samples
Bina Gupta et al.
HYDROMETALLURGY (2013)
Sonochemical reactors: Important design and scale up considerations with a special emphasis on heterogeneous systems
Parag R. Gogate et al.
CHEMICAL ENGINEERING JOURNAL (2011)
Recovery by hydrometallurgical extraction of the platinum-group metals from car catalytic converters
D. Jimenez de Aberasturi et al.
MINERALS ENGINEERING (2011)
Separation of platinum and palladium from chloride solution by solvent extraction using Alamine 300
Basudev Swain et al.
HYDROMETALLURGY (2010)
The use of ultrasound for the fabrication of fuel cell materials
Bruno G. Pollet
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)
Quantitative backscattered electron imaging of field emission scanning electron microscopy for discrimination of nano-scale elements with nm-order spatial resolution
Hyonchol Kim et al.
JOURNAL OF ELECTRON MICROSCOPY (2010)
Selective recovery of catalyst layer from supporting matrix of ceramic-honeycomb-type automobile catalyst
Wantae Kim et al.
JOURNAL OF HAZARDOUS MATERIALS (2010)
Recovery of Platinum and Palladium from the Spent Petroleum Catalysts by Substrate Dissolution in Sulfuric Acid
Min-seuk Kim et al.
MATERIALS TRANSACTIONS (2010)
Solvent extraction separation and recovery of palladium and platinum from chloride leach liquors of spent automobile catalyst
Jin Young Lee et al.
SEPARATION AND PURIFICATION TECHNOLOGY (2010)
Sonoelectrochemical (20 kHz) production of platinum nanoparticles from aqueous solutions
Valentina Zin et al.
ELECTROCHIMICA ACTA (2009)
Transport limited currents close to an ultrasonic horn equivalent flow velocity determination
B. G. Pollet et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2007)
Characterisation of an attrition scrubber for the removal of high molecular weight contaminants in sand
RW Bayley et al.
CHEMICAL ENGINEERING JOURNAL (2005)
A review and assessment of hydrodynamic cavitation as a technology for the future
PR Gogate et al.
ULTRASONICS SONOCHEMISTRY (2005)
Intensifying the attrition of mineral waste in stirrer mills
F Schaaff et al.
INTERNATIONAL JOURNAL OF MINERAL PROCESSING (2004)
Separation and concentration of Pd, Pt, and Rh from automotive catalytic converters by combining two hollow-fiber liquid membrane systems
C Fontàs et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2002)
Sonoelectrochemical recovery of silver from photographic processing solutions
B Pollet et al.
ULTRASONICS SONOCHEMISTRY (2000)
Share Paper
